1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Trike XL motor set (motor+esc+prop)
2 x Parachute P4
3 x Paramotor BackPack XXS (without accessories)
1 x Wing OXY 0,5 pulgadas2
2 x Set cintas unión paracaídas 145 cm
2 x Para-RC Trike "RC-Bullix"
2 x Wing OXY 5,0 m2
1 x Windsock Ozone L - 700 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x DPS Switch JR/JR
1 x Truck-trailer for gliders 720 x 285 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Cabling for Fox MDM1 wings
1 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x 12.7 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 41x5,5 mm wires output (2 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Allen wheel collar M4x4
1 x Profile ABS Square 4 x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x 11 mm Rubber pads (14 pcs)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Propeller balancer
1 x MYLAR film A350 (1000x500 mm)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Carbon fiber rod 14 mmx1000 mm
2 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Clip mini fixing for wing (2 pcs)
1 x CC 02
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Carbon fiber rod 20 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Rubber profile 6-2 mm 2M
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Profile ABS half cane 8.0x1000 mm
1 x BEC 3A FOXY
1 x 250 mm / 16 mm Airbrakes
1 x ABS angle 2,0x2,0x1000 mm
1 x 30 cm BEC cable (male)
1 x Profile ABS half cane 7.0x1000 mm
1 x ORACOVER Ferrari red (2 m)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x Profile ABS half cane 6.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Adapter lead MPX/EC3
1 x Cabin latch Fox MDM1 4m (pair)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cable tie mounts 4.3 (4 uds)
1 x 19 mm 2:1 black termoretract tube
3 x Ballast 700gr OPALE
3 x Parachute BACKUP X100
3 x Para-RC Mix
1 x Straightened threaded rod M3 - 1m
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Tip wing protector 30x10 (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS)
1 x Pushrod octagone 4/3
1 x Snap short M2 (10 uds)
1 x Cockpit aluminium closing 4.7g
1 x Snap pin for micro clevis (10 uds)
1 x Propeller FIALA 15x8 3-Blade
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x 
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Hacker A30-S Radial Set
1 x Fiberglass motor-holder for electric motors
1 x Oracover Green10 m
1 x Propeller BIELA 20x12 5 Bl
1 x Propeller MENZ-S 19x12
1 x Extension 2/3 lipos JST - JST/C
1 x 23x10 BIELA propeller (4-blades) Scale
1 x Angle measurer
1 x Propeller MENZ-S 20x10 3 blades
1 x BIELA 25x10 WILGA Propellers
1 x Field folding model stand SebArt
1 x Propeller MENZ-S 21x10
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x 26x12 BIELA 3Bl Pusher propeller
1 x Propeller MENZ-S 17x8
1 x 24x8 BIELA propeller
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 24x10 4Bl Scale
1 x 16x8 BIELA propeller (4-blades) Corsair Scale
1 x 26x8 BIELA propeller
1 x Long Switch On/Off micro
1 x Propeller MENZ-S 19x8 3-Blades
1 x Electronic switch JETI SP06 Opto
1 x 22x12D BIELA 3Bl propeller (3-blades)
1 x 22x8 BIELA propeller
1 x Angle of incidence meter
1 x 19x8 BIELA propeller
1 x 25x14 4Bl Scale
1 x Extension 5 lipos JST/C - JST
1 x 3-blades 27x12 carbon prop Super Silence
1 x Ferrita 27x14x7 mm
1 x 28x5 mm wires output (2 pcs)
1 x Propeller POWER-PROP 15x8
1 x Control for forward wheel (MINI)
1 x Ferrita con funda
1 x FIALA Propeller 18x10
1 x Cockpit plastic closing
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Cockpit aluminium closing
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Indoor motor holder
1 x Cooler motor type 400
2 x MAX pilot ARTF
1 x Motor holder for AC 28/7
1 x Cooler motor type 150
1 x Motor KAVAN PRO 2225-1600
1 x Frontal support Speed 600
1 x Cooler motor type 280
1 x Opale Rucksack
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Windsock Ozone L -1200 mm
1 x LUCAS pilot ARTF
1 x Para-RC "RC-Evo-Cross" Rescue
11,999.35EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies