130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Hardener Aero EPH 161 (250 g)
3 x resin-hardener L-385 H-385 (625 g)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x resin-hardener package L-385 with hardener H-385
1 x White gelcoat 1 Kg
2 x Epoxy Resin L (2.5 Kg)
1 x resin-hardener L-385 H-385 (1250 g)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Miniature brass strap hinge, 1 m
1 x 15 mm reinforced hinge
2 x Gates hinge black 30x16 mm (2 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
2 x Threaded coupler ALU M3 Ø 6 (2 uds)
3 x Micro flex hinge (12 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Z type of cable coupler Ø 2 (2 uds)
2 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
2 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
3 x Gates hinge aluminium (1 pcs)
2 x Aluminium red ball links M3 V1 (10 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Large flex hinge (12 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
2 x Long pinned hinge (6 uds)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x 18 mm reinforced hinge
2 x Gates hinge 30x16 mm (2 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Flap hinge (6 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
3 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x 25 mm reinforced hinge
2 x Flap hinge 33x9 mm (6 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
2 x Long pinned hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Angled clevis with threaded rod M3
2 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x MEKP Harderner 100 g
1 x Brass control horn M4 short for wire (10pcs)
1 x Horn with ball 55x40
1 x Horn for flap control (1 pcs)
1 x SlowFlyer control horn (3 pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Brass control horn M4 short for wire (4 pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
2 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x 6 mm blue aluminium threaded horn with patella
1 x Small aluminium horn blue (2pcs)
1 x Horn 5/15 with M2 Bearing
1 x Horn 6/27 with M3 Bearing
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Horn 6/35 with M3 Bearing
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x LH long aluminium horn L31xH30 (2pcs)
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Horn 20x28,5 mm (2 pcs)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x 1/6 Pilot "Garry"
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x Pilot JAN 1/4 Saiplanes
1 x Piloto JET 1:3,5
1 x 1/6 Pilot "Cindy"
1 x Pilot "Duke" Legends Series (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 1/6 Pilot "John"
1 x 1/6 Pilot "Tony"
1 x 1/4 Pilot "Mike"
1 x 1/10 Pilot "Jimmy"
1 x 1/12 Pilot "Fighter"
2 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x Piloto Jet "Green" 1/6 Scale
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/12 Pilot "Langley"
1 x 4 LiPo XH>EH adapter
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x USB HLS prog. interface
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CM-3
2 x MPX-Dean "T" Adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Field folding model stand
1 x Spannlack 1000 ml
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Foil for sticking flaps and ailerons
1 x Tape GFK 38 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Kwik link with arm M5xM2,5xL30
3 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Small pinned hinge (12 uds)
3 x Pin hinge 39x20 mm (10 uds)
1 x Round flex hinge (12 uds)
1 x Porta Kwik link M4 3 mm (2 pcs)
2 x Aro pasacable Ø20 mm (4 pcs)
1 x Support XT60 conector (2 pcs)
2 x Pulley brass 5/1,5 (2 pcs)
1 x Horn mando small (2 pcs)
1 x Long adjustable control horn with bearing
2 x resin-hardener L-385 H-385 (5000 g)
1 x 6 mm M3 variable horn
2 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x Horn DUBRO 1/2A
2 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Horn mando long (2 pcs)
1 x Micro control horn (2 pcs)
1 x Rudder forward 70x28 "type Kato"
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Small aluminium horn gold (2pcs)
1 x Carbon plate 350x150x3.0 mm
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/4 Pilot "Heidi"
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x Threaded coupler M3 (10 uds)
2 x Fast'n EZ-CA-Hinge (12 uds)
2 x Gates hinge
1 x Vest clothes Hispano Aviación
1 x APM2.6 Power module with 5.3V DC BEC
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x Ply-Span 450x600/13g Yellow
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x Turnbuckle M1,6x17/27 (2pcs)
1 x Cable coupler M3 (10 uds)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Wire easy tensioner (red)
2 x Pin hinge 34x16 mm (10 uds)
1 x Tube support Ø 6mm (10 pcs)
1 x E_brakes electronics
1 x GS-200 Electronic
1 x Nose leg 155 mm with wheels 70 mm
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x Turnbuckle M2,5x27/43 (2pcs)
1 x Cable coupler M2 (10 uds)
1 x Pin hinge 26x11 mm (10 uds)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Cable coupler M2,5 (2 pcs)
1 x 4 mm M3 red control terminal (4 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Cable coupler M2x66 (2 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Medium pin type hinge (12 uds)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Turnbuckle M2x22/35 (2pcs)
1 x wire tensioner (blue)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x wire tensioner (red)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Cable coupler M3 (10 uds)
2 x Indoor hinge with servo arm integraded
1 x Cable coupler M2 (10 uds)
1 x Pulley brass 6/1,5 (2 pcs)
1 x Pulley brass 2,5/1 (2 pcs)
2 x Turnbuckle M2,5x32/48 (2pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Round Rod 1.0x3.5 cm
1 x Pulley brass 8/2 (2 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Wire easy tensioner (silver)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Small pinned hinge (6 uds)
1 x wire tensioner (black)
1 x wire tensioner (silver)
1 x Support ECU Xicoy X-45
1 x Support Filtro FESTO
1 x Tapa estado carga XT-60 (6 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Rudder forward 90x28 "type Kato"
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horns indoor
1 x Micro control horn T2 Ø 1
1 x Boeing (TX) T-7A RED HAWK
1 x Strip 2,0x2,0x330 mm
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt)
1 x Avanti S 2.3m Jet WHITE/BLUE (SebArt)
1 x FIALA Propeller 19x12 Electric
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Wings carryng bags 30 class (SebART)
1 x Crimping tool
1 x Avanti S 2.3m Jet YELLOW/BLACK (SebArt)
1 x Avanti S Jet, Kerosene+Smoke Tank(SebART)
16,395.32EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies