Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]

Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (male) temporarily out of stock	Cyano SUPER - GOLD™ THIN (12g) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Hardener Aero EPH 161 (250 g)
3 x	resin-hardener L-385 H-385 (625 g)
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	resin-hardener package L-385 with hardener H-385
1 x	White gelcoat 1 Kg
2 x	Epoxy Resin L (2.5 Kg)
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	15 mm reinforced hinge
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Micro flex hinge (12 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Z type of cable coupler Ø 2 (2 uds)
2 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
2 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Long pinned hinge (6 uds)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	18 mm reinforced hinge
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Flap hinge (6 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
3 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	25 mm reinforced hinge
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Long pinned hinge (12 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Angled clevis with threaded rod M3
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	MEKP Harderner 100 g
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn with ball 55x40
1 x	Horn for flap control (1 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Horn 6/27 with M3 Bearing
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Horn 6/35 with M3 Bearing
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	LH long aluminium horn L31xH30 (2pcs)
2 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	1/6 Pilot "Garry"
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Pilot JAN 1/4 Saiplanes
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/6 Pilot "John"
1 x	1/6 Pilot "Tony"
1 x	1/4 Pilot "Mike"
1 x	1/10 Pilot "Jimmy"
1 x	1/12 Pilot "Fighter"
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/12 Pilot "Langley"
1 x	4 LiPo XH>EH adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	USB HLS prog. interface
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CM-3
1 x	MPX-Dean "T" Adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Field folding model stand
1 x	Spannlack 1000 ml
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Foil for sticking flaps and ailerons
1 x	Tape GFK 38 mm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Kwik link with arm M5xM2,5xL30
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Small pinned hinge (12 uds)
2 x	Pin hinge 39x20 mm (10 uds)
1 x	Round flex hinge (12 uds)
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support XT60 conector (2 pcs)
2 x	Pulley brass 5/1,5 (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Long adjustable control horn with bearing
2 x	resin-hardener L-385 H-385 (5000 g)
1 x	6 mm M3 variable horn
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn DUBRO 1/2A
2 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn mando long (2 pcs)
1 x	Micro control horn (2 pcs)
1 x	Rudder forward 70x28 "type Kato"
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Small aluminium horn gold (2pcs)
1 x	Carbon plate 350x150x3.0 mm
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/4 Pilot "Heidi"
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	Threaded coupler M3 (10 uds)
2 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Gates hinge
1 x	Vest clothes Hispano Aviación
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	Ply-Span 450x600/13g Yellow
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Turnbuckle M1,6x17/27 (2pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Wire easy tensioner (red)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Tube support Ø 6mm (10 pcs)
1 x	E_brakes electronics
1 x	GS-200 Electronic
1 x	Nose leg 155 mm with wheels 70 mm
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Cable coupler M2x66 (2 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	wire tensioner (blue)

7,874.83EUR