1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x SIMtransmitter 6 Mode 2
1 x RF9 Flight Simulator with Spektrum Controller
1 x GameCommander USB Universal
1 x 5 LiPo XH>EH adapter
1 x Adapter lead MPX/XT60
2 x 3 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CM-3
1 x MPX-Dean "T" Adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x USB HLS prog. interface
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x CC 01
1 x 4 LiPo XH>EH adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x 30 cm BEC cable (male)
1 x CC 02
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Xplorer3 anemometro
1 x Hot Glue Stick GREEN
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Hot Glue Stick BLACK
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Z Bender - S Type Tool
1 x Ball Link Plier
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Dust collector for mould cleaning
1 x Digital precision scale up to 2000 g
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Xplorer4 anemometro
1 x Starter 12v (Max 180 and 30ccm)
2 x Aro pasacable Ø25 mm (4 pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Spring lock washer 3.1 mm (20 pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Cable tie mounts 4.3 (4 uds)
1 x Pine wood slat 2.0x10.0x1000 mm
2 x CC 05
1 x 28x5 mm wires output (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Interface Jack Adapter IKARUS
1 x Blocking screws M6 gas engine
1 x Tacometer mini ignition RCEXL
1 x Propeller diller for DLE111 and DA85-150
1 x DA 85 / DA 100 / DA 100 L carburetor
2 x EasyFLY Addon
1 x Spray EC Red 400ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Nitroverdu 500 ml
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Hobbylite Filler, Balsa colour
1 x DLE 111 pipe plug
1 x Spark motor OS nº 3
1 x Adapters for 7.5 - 35cc aircraft and naval engines
2 x Propeller diller for DA50, DLE55 red
2 x Propadapter for motor A60-V2
1 x Hose clips 6 mm
2 x Slave-cable USB Easy Sim
1 x Filler Gauges
1 x Sparkplug 1/4-32 EVO 10GX
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Male connector for 20 pines AWG
1 x PowerBox Smokepump JETs 2x outside
1 x TrainerCord (master-learner)
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Balsa panel 4.0x100x1000 mm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 1/6 Pilot "Cindy"
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x 70x23 Ø3.5 mm aluminium core wheel
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x TP/TopFuel - XH 2/3S Adapter
1 x Balsa panel 8.0x100x1000 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Bags MB-339 (Wings & Elevators)
1 x 160 mm carbon undercarriage (2pcs)
1 x 60x25 mm tail wheel "type F3A"
1 x 
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x 43x14 mm hard foam KOVO wheel (2 pcs)
1 x 75 mm INO spinner (carbon imitation)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Sparkplug Champion RCJ-7Y for ZG
1 x OSD Telemetry sensor
1 x FESTO connector M7 barb fitting 4mm
1 x FIALA Propeller 24x10
1 x Propeller FIALA 15x8 3-Blade
1 x Propeller APC 11x5.5 Electric
1 x Switching module high voltage SXH
1 x Propeller APC 10x10 Electric
1 x Propeller APC 11x7 SF
1 x FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS)
1 x Carburator Moki S400
1 x 120x60 mm SLH KOVO wheel
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x 69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x Sparkplug NGK CM6
1 x Sparkplug DLE CM6
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x DLA 116 crankshaft
1 x Short Switch On/Off micro
1 x 30/11-26 Zoll, 3-Blade Scale
1 x Propeller APC 13x8 Electric
1 x Propeller APC 12x8 SF
1 x Propeller APC 10x3,8 SF
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x FIALA Propeller 20x8
1 x Propeller APC 14x10 Electric
1 x FIALA Propeller 23x10
1 x Propeller APC 11x4.7 SF
1 x Carburator Moki S 180
1 x Carbon plate 350x150x2.5 mm
2 x Propeller CFK 12.75x13
2 x Propeller CFK 18x19
2 x Propeller CFK 15x16
2 x Propeller CFK 16x16 Slim
1 x Propeller RF CFK 10x17
1 x Propeller CFK 16x13
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Charger ISDT 608AC 200W
1 x Carbon plate 350x150x2.0 mm
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Propeller CFK 16x17
1 x Propeller CFK 13x9
1 x Propeller CFK 20x13
1 x Propeller CFK 14x7
1 x Propeller RF CFK 13x7
1 x Propeller CFK 17x13
1 x Propeller CFK 12X6
1 x Propeller CFK 15x13
1 x Propeller CFK 15x7
1 x Propeller CFK 18x17
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 14.5x10 Slim
1 x Propeller CFK 11x8
1 x Propeller CFK 15.5x10
1 x Propeller CFK 18x9
1 x Propeller CFK 23x12
1 x Receiver R7008HV comatible FUTABA
1 x Propeller CFK 14x8
1 x Propeller CFK 18x16
1 x Propeller RF CFK 13x6.5
1 x Propeller CFK 12.5x6.5
1 x Propeller CFK 14x6.5
1 x Propeller RF CFK 14.5x14
1 x Propeller CFK 20x13 "white"
1 x Propeller CFK 17x18
1 x Propeller CFK 12.5x7
5,501.75EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies