Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak Modulo Glasses JETI
151.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

4 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn with ball 55x40
1 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Cable with accesories
1 x	6 mm red aluminium threaded horn with patella
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	20 mm carbon horn
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 5/15 with M2 Bearing
2 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn 6/27 with M3 Bearing
1 x	Small aluminium horn gold (2pcs)
1 x	Cable control set
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
3 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Paint gun for sprays
1 x	Oratex Red Fokker 10 m
1 x	XH female balance (2S) connector (2 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Rudder forward 70x28 "type Kato"
2 x	Micro control horn (2 pcs)
2 x	Brass control horn M2 large for wire (2pcs)
2 x	Rudder forward 90x28 "type Kato"
1 x	Support Pitot JETI
2 x	Soporte grifo FESTO (2 pcs)
1 x	Support FUEL DOT V3
2 x	Support XT60 conector (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
2 x	Support Filtro FESTO
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
2 x	Long adjustable control horn 3x34
1 x	Horn mando small (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	6 mm aluminium horn with patella
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 6/35 with M3 Bearing
2 x	Extension Arm for Carburetor
1 x	EME 55 cc carburetor WALBRO
1 x	SAITO FG-36 carburetor
2 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Reed valve for DA 50-R
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
2 x	Conector XT-30 (hembra)
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	XT-60 connector (female)
2 x	Connectors DEANS (T) micro
1 x	Connectors DEANS (T)
1 x	MR30 connector female
1 x	XH female balance (9S) connector (2 pcs)
2 x	Red 4 mm connector holder
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 400 mm (2 pcs)
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
2 x	6 mm M3 variable inclined horn
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Support conector MPX (6 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Starter EM Gear Power 250
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Short adjustable control horn 3x24
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Glow filter
1 x	Conector Servo female 4 pines
1 x	2 mm male connector (2 pcs) with safety connector
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH female balance (6S) connector (2 pcs)
1 x	Receiver RFA05 5Ch compatible FUTABA
1 x	3-blades 24x12 carbon prop Super Silence
1 x	Turbine RHINO 200 SE 20.4 Kg
1 x	Valve spring SAITO 120
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH male balance (9S) connector (2 pcs)
1 x	Wingstabi 9 DR M-Link Receiver
1 x	22x10 prop Super Silence
1 x	3-blades 30x12 carbon prop Super Silence
1 x	3-blades 20x12 carbon prop Super Silence
1 x	FALCON 27X11 CARBON PROPELLER (GAS)
1 x	FALCON 24X10 CARBON PROPELLER (GAS)
1 x	FALCON 28X10 CARBON PROPELLER (GAS)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	5 mm M2 variable horn
1 x	Rudder forward 80x28 "type Kato"
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Brass control horn M2 long for wire (10pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Cable coupler M2 (10 uds)
1 x	wire tensioner (black)
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	Long adjustable control horn with bearing
1 x	Horns indoor
1 x	Extra long horn 60x30
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	wire tensioner (blue)
1 x	Black 2,4 GHz antenna exit guides (2 pcs)

7,575.64EUR