1,759.99EUR

MB-339 Aermachi 84" ARF c/retractil electric
[HAN3390]


MB-339 Aermachi 84" ARF c/retractil electric

Wingspan 84" (2134 mm)
Product Length 79" (2007 mm)
Landing Gear Electric Retractable
Completion Level Almost Ready-To-Fly
Approximate Assembly Time 20+ Hours
Flaps Yes
Product Weight 23Lb (10.43Kg)
Wing Loading 42.63 oz/sq ft
Minimum Required Radio 8+ Channel
Radio Sold Separately
Receiver Sold Separately
Material Wood
Retracts Included
Power Type Turbine
Servos Sold Separately
Skill Level Level 4
Trim Scheme Colors White, Orange, Blue

Features
Carbon fiber reinforced wood construction provides a light and strong airframe.
Original trim scheme provides high-contrast and great visibility.
Two-piece, bolt-on fuselage features removable nose section.
Multiple hatches allow easy access to turbine, wing and components
Large top-hatch with two sprung latch system offer access to electronics and fuel system
Detailed cockpit includes two painted pilot busts, 3d instrument panel and clear canopy
Includes electric retract set with trailing link struts, wheels, and electric brakes
Two-piece, plug-in wing with carbon tube for easy field assembly, transportation, and storage
Dual-wall stainless steel tail pipe included
Complete hardware kit includes fuel tank
Removable stabilizer for even easier storage and transportation
Includes optional-use and easy to install/remove tip tanks
Genuine UltraCote film covering provides a long-lasting finish

In The Box
(1) Aermacchi MB-339 60-85N Turbine, 84" ARF
(1) User Manual

Needed to Complete
(1) 60-85N turbine
(4) Standard Digital High Torque Servos
(4) Mini Digital High Torque Servos
(1) Full-range, 8+ Channel Transmitter and Receiver
(1) Receiver Battery
(1) ECU Battery
(1) Air Trap
Tools and Adhesives
Field Equipment



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Beech dowels 4.0 x 1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Balsa panel 6.0x100x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Beech dowels 3.0 x 1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 10x100x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
3 x CC 05
1 x Double conector with JR adapter and 200 mm extension
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 LiPo XH>EH adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x DPSI Ampere battery backer
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x DPS Switch JR/JR
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x BEC 3A FOXY
1 x Circlick securite
1 x Foil for sticking flaps and ailerons
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 
3 x SE Ring 330 mm (4 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x200 mm battery rings
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 38 mm
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Spikes Band (5 m)
2 x SE Ring 350 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Long pinned hinge (6 uds)
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Large flex hinge (12 uds)
1 x Motor DLE 170 M- Paramotors
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Ballast 700gr OPALE
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Buy Perforated film 100 cm / 50 m
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Air pressure gauge
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x UBEC 6A KAVAN
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Male Prolonger TP 4/5S
1 x SBEC 30 D
1 x Connector Sub-D 2+5 Male
1 x PowerBox Smokepump
2 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Electric Fuel Pump 12v
1 x Cabling for Fox MDM1 wings
3 x 30 cm BEC cable (male)
1 x PSC 6
1 x Interruptor RX/Batterie
1 x Pins M connect Multipin connectors AWG 20-24
1 x Servo slow down unit (0,7-14,7 sec )
1 x EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x 550 cc gasoline fuel tank complet
1 x Deposito DUBRO 3000cc-100oz
1 x 22m Fitting barb
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm)
1 x EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG
1 x Deposito SECRAFT V2 1000 ml Gas
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 280 cc gasoline fuel tank complet
1 x SE Ring 300 mm (2 pcs)
1 x Tape GFK 25 mm
2 x Connector Sub-D 2+5 Female
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Ring 320 mm length (5 pcs)
1 x 18 mm reinforced hinge
1 x Gates hinge
1 x 25 mm reinforced hinge
1 x Gates hinge aluminium (1 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Servo MKS 6100 DS
1 x Servo MKS HBL599 SL
1 x Micro flex hinge (12 uds)
1 x CC 01
1 x Servo MKS HV747
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x Wheel Ø 90 mm (1 ud) Electron Retracts
1 x Wheel 28 mm
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x Wheel 22 mm
1 x Wheel FEMA 165 mm / 8 mm
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Wheel FEMA 112 mm / 6 mm
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x Wheel FEMA 140 mm / 6 mm
1 x Wheel FEMA 152 mm / 8 mm
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x SBEC Jeti
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x JETImodel Addcap 1640
1 x XICOY X45 rail
1 x Magnetic Interruptor MULTIPLEX
1 x SPS 70V 100/200 A
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Selfstart electronic switch
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x Quick hose connector 6-4 mm
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x 5 LiPo XH>EH adapter
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x OPUS-V / Jet-CC-BF
1 x Smoke pump RCEXL
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x SBEC 40
1 x Male connector for 20 pines AWG
1 x Tank GFK Opus/JEt 300 ml
1 x Wings Bags JEEMO
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x 30 cm BEC cable (female)
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x SPARK Switch 12v
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Female connector for 20 pines AWG
1 x Electric Fuel pump
12,902.98EUR
Manufacturers
Manufacturer Info
HANGAR 9
Other products
Languages
Español English
Currencies