Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Turbina XICOY X240 compact
3,385.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
3 x	Conector FUTABA Servo macho (10 pcs)
2 x	Conector JR Servo hembra (10 pcs)
2 x	Conector banana oro 8,0 mm 5 pcs (hembra)
3 x	Conector FUTABA Servo hembra (10 pcs)
2 x	Conector 2 mm macho (2 pcs) con conector de seguridad
2 x	Conector banana oro 4 mm (Ultralight)
2 x	Conector banana oro 0,8 mm
3 x	Conector MULTIPLEX hembra 30 cm
2 x	Conector BEC hembra (10 pcs)
3 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
3 x	Conector banana oro 4 mm
1 x	Conector CAN 15
1 x	Conector JR Servo hembra (10 pcs)
2 x	Conector banana oro 8,0 mm. 5 pcs (macho)
2 x	Conector DEANS hembra 30 cm
3 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
3 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
3 x	Conector banana oro 2 mm (Ultralight)
3 x	Conector banana oro 5,5 mm
2 x	Conector BEC macho (10 pcs)
2 x	Conector JR Servo macho (10 pcs)
2 x	Funda conector 2 mm
3 x	Conector banana oro 3,5 mm
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
4 x	Conector banana oro 3 mm
1 x	Conector JR Servo macho (10 pcs)
3 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
3 x	Conector JR Servo macho (50 pcs)
1 x	Conector JR Servo hembra (50 pcs)
2 x	Conector equilibrado XH (7S) macho (2 pcs)
3 x	Conector MPX 8 pins con base (negro) 1 par (macho-hembra)
3 x	Conector MPX hembra
2 x	Conector MR30 (macho)
2 x	Conector MPX hembra (doble PIN)
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
2 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
2 x	Conector MPX macho
2 x	Conector MPX negro hembra
2 x	Conector XT-150 6mm (Set: 5 pares)
2 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	Conector MPX negro macho
1 x	Conector ala MPX 8 pines con conector M/H
2 x	Conector banana oro 6,0 mm
5 x	Conector XT-30 (macho)
4 x	Conector equilibrado XH (6S) hembra (2 pcs)
1 x	Conector banana oro 2,5 mm (100 parejas)
3 x	Conector equilibrado XH (6S) macho (2 pcs)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector banana oro 2 mm
1 x	Conector equilibrado XH (7S) hembra (2 pcs)
3 x	Conector DEANS 4 pines (1 par)
3 x	Conector equilibrado XH (9S) macho (2 pcs)
1 x	Conector equilibrado XH (2S) macho (2 pcs)
2 x	Conector micro DEANS (T)
3 x	Conector MPX macho (doble PIN)
2 x	Conector equilibrado XH (5S) macho (2 pcs)
2 x	Conector MPX 8 pins (verde) 1 par (macho-hembra)
2 x	Conector equilibrado XH (8S) macho (2 pcs)
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
2 x	Conector banana oro 5,5 mm antichispa
1 x	Conector equilibrado XH (4S) macho (2 pcs)
2 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Conector equilibrado XH (9S) hembra (2 pcs)
3 x	Conector DEANS (T)
1 x	Conector XT-60 (hembra)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Liston ABS 1,5x2,0x1000 mm
2 x	Varilla ABS 1,0x1000 mm
3 x	Liston ABS I 10x5x1000 mm
2 x	Liston ABS 1,0x3,0x1000 mm
2 x	Liston ABS I 3,5x1,75x330 mm
3 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
2 x	Liston ABS 2.0x3.0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Paracaídas de seguridad 1,8 m2
2 x	Paracaídas PV6 para F3J
2 x	Paramotor Trike XL
2 x	Paracaídas P4
2 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x	Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable carga emisora GRAUPNER
1 x	e-Looger V3
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Terminales riostras M3 (10 uds)
1 x	Soporte de seguridad MPX (5 pcs)
1 x	Conector banana oro 4 mm antichispa
2 x	Soporte conector MPX (2 pcs)
1 x	Protector Conector Dean-T (1 pareja)
2 x	Conector MR-60 (pareja)
2 x	Conector XT60 macho empotrar (2 pcs)
2 x	Protector Conector MPX (1 pareja)
3 x	Conector XT-30 (pareja)
1 x	Plancha carbono 350x150x3.0 mm
1 x	Termo-retráctil rojo tubo de 2,4x1000 mm 2:1
1 x	Pasta para estaño 20 g
1 x	Termo-retráctil azul tubo de 4,8x1000 mm 2:1
1 x	Termo-retráctil negro tubo de 2,4x1000 mm 2:1
1 x	Adaptador 4 LiPos XH>EH
1 x	Conector XT-60 (macho)
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
2 x	Brazo servo 20 mm Futaba
1 x	Servo FUTABA SBL 471 SV
1 x	Brazo servo doble pull-pull 76/92 mm Futaba con rótulas
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Rueda KOVO espuma dura 73x24 mm con rodamiento (2 pcs)
1 x	Paramotor BackPack XXS (sin accesorios)
1 x	Rueda 69x25 (2.75") centro aluminio eje Ø4 mm
1 x	Piloto MAX ARTF
1 x	Brazo servo 20 mm FUTABA con rótula
1 x	Set de brazos de servo Hitec 40/50/55/5055 MG
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
2 x	Vela OXY 0,5 pulgadas2
2 x	Servo FUTABA S 3072 HV S-Bus
1 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Ballast 700gr OPALE
1 x	Rueda 4"-102 x 45 mm centro aluminio Ø5 mm
1 x	Rueda KOVO SLH con rodamiento y núcleo metálico 170x54 mm
1 x	Rueda neumatica "ballon" 160 mm con rodamiento (2 uds)
1 x	Conector 5,0 mm EC5 hembra con funda (2 pcs)
1 x	SERVO S9177SV HV S-Bus2 Programable
1 x	Rueda KOVO espuma dura 43x14 mm (2 pcs)
1 x	Brazo servo 30 mm Futaba con rótula M3
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	MIG 29 3D RTF, Servo
2 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	Brazos carbono para HITEC HS 65 (4 pcs)
1 x	Brazo servo 38 mm Hitec
1 x	Paracaidas BACKUP X100
1 x	Valvula DUBRO neumatico (1 pcs)
1 x	Servo TT ACE SHV 1504 MG
2 x	Servo FUTABA BLS172 SV
3 x	Paracaidas rescate "RC-Evo-Cross"
1 x	Servo FUTABA S 9670 SV
2 x	Prisionero aluminio 2 mm Ø (4 uds)
2 x	Sistema salvaservos rueda delantera BIDULE 55
1 x	Transmision funda/varilla octog. plastica 3/2
1 x	Soporte conector MPX (6 pcs)
1 x	Soporte cental de las palas del rotor
1 x	Bahía de la batería
1 x	Pegatinas Cierva C30 versión española
1 x	Corona pre-rotación LA500
1 x	Gorra Jeti Negra
1 x	Autogiro Cierva C30 Spain
1 x	Tren de aterrizaje completo
1 x	Grub screw M3x3 shouldered (2 pcs)
2 x	Soporte conector MPX macho (6 pcs)
1 x	Contacto macho pin conector (10 pcs)
2 x	Soporte conector MPX
1 x	Elevador Cierva C30
1 x	Soporte inferior de las palas del rotor
1 x	Rodamiento one-way LA500
1 x	Bolas 4mm
1 x	Soporte del rodamiento frontal LA500
1 x	Conector macho bateria 1s Kavan/Walkera 10cm cable
1 x	Bearing housing
1 x	Pletina MPX (5 pcs)
1 x	Soporte cental de las palas del rotor GFK 0,5 mm
1 x	Núcleo del rotor
1 x	Housing-upper del cíclico LA500
1 x	Soporte superior de las palas del rotor
1 x	Hub corona pre-rotación LA500
1 x	Pletina MPX 6 pines (5 uds)
1 x	Parte superior del rotor
1 x	Palanca del cíclico LA500
1 x	Conector Centralita Optotronix Aurora
1 x	Rodamiento 3x8x4
1 x	Conector banana oro 8,0 mm
1 x	Enganche de las palas del rotor
1 x	Soporte conector MPX (4 pcs)
1 x	Adaptador Sub-d conector MPX
1 x	Parte central del cíclico LA500
1 x	Carena delantera LA500
1 x	Head spacer
1 x	Eje de la cabeza rotora LA500
1 x	Soporte conector MPX hembra (6 pcs)
1 x	Autogiro LA500
1 x	Conector XT-90 (pareja)
1 x	Núcleo del buje del rotor
1 x	Motor simulado Cierva C30
1 x	Palas LA500
1 x	Parte inferior del rotor Nueva
1 x	Núcleo de la cabeza rotora LA500
1 x	Pletina MPX 8 pines (5 uds)
1 x	Conector MR30 (hembra)
1 x	Varilla mando doble roscada aluminio M2,5 30 mm (2 pcs)
1 x	Transmision funda/varilla greyline plastica 4/3 porta kwik link
1 x	Cargador GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x	Cargador SKY RC D200 neo
1 x	Adaptadores carga 6s JST-XH
1 x	Helice pleg. VITAPROP 15x9.5 carbono
1 x	Hélice POWER-PROP 10x7
1 x	Conector MT-60 (pareja)
1 x	Servo FUTABA HPS-A700 Digital S-Bus
1 x	Brazo servo 25 mm Futaba con rótula
1 x	Rueda superlight deluxe 40 mm (2 pcs)
1 x	Actuador electrico 25 mm HIGH TORQUE
1 x	Capuchón BOSCH para bujía ZG 26SC/SCM, 231SLH, G230RC
1 x	Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x	Transmision funda/varilla greyline plastica 3/2 kwik link M3 100
1 x	Carburador completo para DA 85 / DA 100 / DA 100 L
1 x	Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x	Capuchón BOSCH para bujía DA 50-R, DA 100 y DA 150
1 x	Prisionero 3.5 mm Ø (4 uds)
1 x	Caja de láminas para DA-60/70
1 x	Bancada motor ZG45/62, Long: 54 mm
1 x	Cono aluminio 38 mm / 5 mm helice plegable
1 x	Helice tripala 15x7 MASTER AIRSCREW
1 x	Funda hélices 16-20" (1 pcs)
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Rueda espuma Ø 60mm x 21 mm (2pcs) eje Ø 4.0mm
1 x	Rueda FEMA 152 mm / 8 mm
1 x	Hélice POWER-PROP 14x12
1 x	Motorización Trike XL (motor+regulador+helice)
1 x	Hélice POWER-PROP 13x8
1 x	Servo RHINO pro SHV digi 4
1 x	Rueda de cola 38 mm V2
1 x	Para-RC Mix
1 x	Helice Electric glass 9,5x6
1 x	Rueda FEMA 82 mm / 5 mm
1 x	Rueda 152x46 centro aluminio Ø6.0 mm
1 x	Rueda de cola 20 mm para modelos 0,5-1 Kg
1 x	Acoplador helices 6/8 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Hélice Electric Carbon 9.5x7
1 x	Rueda 115 mm con electrofreno (2 uds)
1 x	Rueda 127x43 centro aluminio Ø6.0 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Helice HUNTER 400
1 x	Helice XOAR 22x10 Electrica
1 x	Varilla ABS 5,0x1000 mm
1 x	Rueda FEMA 70 mm / 5 mm
1 x	Hélice POWER-PROP 11x6
2 x	Piloto LUCAS ARTF
1 x	Hélice MEJZLIK 20x13 Electric light (41 g)
1 x	Vela OXY 5.0 m2
1 x	Hélice POWER-PROP 10x7 Izda
1 x	Hélice POWER-PROP 12x9
1 x	Hélice Electric Carbon 10x6
1 x	Hélice POWER-PROP 12x8
1 x	Manga viento Ozone S - 700 mm
1 x	Brazo servo 38 mm Futaba con rótula
1 x	Piñones servo FUTABA 3010
1 x	Rueda espuma Ø 55mm x 19 mm (2pcs) eje Ø 3.5mm
1 x	Soporte de seguridad conector MPX (4 pcs)
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Actuador electrico 25 mm
1 x	Prisionero allen M4x4
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Caja de válvulas DA 50-R
1 x	Bisagra correa de latón en miniatura 1m
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Brazo ext. carburador Tufnol d=4.7mm
1 x	Clips scape Ø25 mm
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Sistema salvaservos rueda delantera BIDULE 111
1 x	Transmision funda/varilla greyline plastica 3/2 porta kwik link
1 x	Prisionero allen M3x3
1 x	Bancada motor ZG45/62, Long: 72 mm
1 x	Transmision funda/varilla octog. plastica 4/3
1 x	Arandela prop. ZG45SL, ZG62/S/SL y ZG74B/ZG80B
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Protector punta ala 38x10x12 (2 pcs)
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Arillo pistón para motor DA-50R y DA-100
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Rueda espuma Ø 60mm x 19 mm (2pcs) eje Ø 3.5mm
1 x	Rueda FEMA 178 mm / 8 mm
1 x	Cono aluminio autoventilado hélice pleg. 40 mm dia./eje 5 mm
1 x	GPS Logger Dymond
2 x	Adaptador FESTO 4mm/ Tygon
1 x	Pletinas nylon medianas anclaje tren aterrizaje (4 uds)

13,219.13EUR