59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

Connectors DEANS (T)
Connectors DEANS (T)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Beech dowels 4.0 x 1000 mm
2 x A/C quality beech plywood 600x300x5.0 mm
1 x Balsa panel 3.0x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 10x100x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Extinguisher CO2 - 2 Kg
2 x Round Rod 3,0x1000 mm
2 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
2 x ABS Strip 1.5x4.0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
3 x ABS Strip 1.5x2.0x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x Strip 3,5x1,75x330 mm
1 x Strip 2,5x1,25x330 mm
2 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 9.0x7.0x1000 mm
2 x ABS tube 3.0x2.0x1000 mm
2 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 12.0x10.0x1000 mm
2 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x ABS tube 7.0x6.0x1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x BALSA triangular 8x8x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Glases Flitemaster
2 x Pine wood slat 10x10x1000 mm
2 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x BALSA trip 6.0x6.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
2 x Walnut wood slat 1.5x1.5x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x Glases Aspen
1 x Pine wood slat 3.0x7.0x1000 mm
2 x Glases Ace
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
3 x BALSA trip 2.0x10.0x1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Glases Nimbus "Black"
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Glases Innovation Plus
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Glases Stratus
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Aluminium wide washer M3 blue (4 pcs)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Wing OXY 5,0 m2
2 x Beech dowels 3.0 x 1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
2 x Round Rod 1,25x1000 mm
1 x Strip 1,5x1,5x330 mm
2 x Round Rod 2,5x1000 mm
2 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
2 x Strip ABS 2.0x8.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.0x4.0x1000 mm
2 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Charger LiPo Charger4
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x T-shape holder metal LAMA
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Carbon blade 3D 230 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
2 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
2 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon blade 230 mm
2 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x ABS tube 8.0x6.0x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Cooler motor type 280
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
2 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Cooler motor type 300
1 x Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Flybar support metal LAMA
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Glass fibre braided sleeve (45mm) roll 20m
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Styrene plate 320x120x1.0 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Styrene plate 320x120x0.5 mm
1 x Glass fibre sleeve Ø 20 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Release film 100 cm x 50 m
1 x PVC grid straight 290x185x0.32 mm
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x Regulador Jeti Jes 045
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Vacuum bag, 1200 mm x 50 m
1 x A/C quality beech plywood 1520x750x4.0 mm
2 x BALSA trip 3.0x5.0x1000 mm
2 x Birch plywood plate 600x300x3.0 mm
1 x BALSA triangular 6x6x1000 mm
3,941.00EUR
Manufacturers
Languages
Español English
Currencies