1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Tube Pitot to PIXHAWK
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x PIX Hawk with accesories
1 x PPM Encoder Module
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm BEC cable (female)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x BEC 3A FOXY
1 x APM2.6 Power module with 5.3V DC BEC
2 x 4 LiPo XH>EH adapter
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Futaba External voltage input cable Futaba CA-RVIN-700
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x CC 03
2 x Towing hook <3m
2 x Stickers-digit for marking
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Locking cable tie 2.5x100 (uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Canopy Latch
1 x Steering arm 16 mm Ø 3 mm (2 uds)
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Electric spoiler 250 mm (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Set cintas unión paracaídas 145 cm
1 x Propeller POWER-PROP 7x7
1 x 3 LiPo XH>EH adapter
2 x 30 cm BEC cable (male)
1 x Cabling for Fox MDM1 wings
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Circlick securite
1 x Extension 5 lipos JST/C - JST
1 x Recessed MPX connector support (6 pcs)
1 x 2 LiPo XH>EH adapter
1 x Support FUEL DOT V3
1 x CC 02
1 x Three-position switched channel, short
2 x SBEC 40
1 x CC 01
1 x Male connector for 6 pines AWG
1 x Extension 2/3 lipos JST/C
1 x Female connector for 12 pines AWG
1 x Electronic switch JETI SP06 Opto
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Selfstart electronic switch
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Short Switch On/Off micro
1 x Soporte filtro FESTO (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x EWC3 40 cm wing connector
1 x Magnetic Interruptor MULTIPLEX
1 x USB interface ALTIS
1 x Support pump Xicoy X45
1 x USB Interface REVOLECTRIX for CellPRO 10s
2 x Towing hook
1 x Hacker X-Pro USB interface V2
1 x Male connector for 16 pines AWG
1 x Connector Sub-D 2+5 Female
1 x Support Pitot JETI
1 x PSC 6
1 x SPS Remote switch actuator
1 x Glases Ace
1 x Glases Innovation Plus
1 x Landing gear retract neumatic (Jet Legend)
1 x 28x5 mm wires output (2 pcs)
1 x Snap short M2 (10 uds)
1 x Allen wheel collar M4x4
1 x Snap long M2 (10 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x T-Motor U7-V2.0 Kv420
1 x Mini neumatic retract landing gear
1 x Micro Crystal RX 35.010 Ch 61
1 x SBEC Jeti
1 x UBEC 6A KAVAN
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Charger SKY RC e680
1 x Adaptadores carga 6s JST-XH
1 x BETA 1400 RTF Red
1 x Ciano KAVAN Thin 20g
1 x FesEx-Uni6 System
1 x Hovercraft sailcloth
1 x Servo NARO Max Std
1 x SWTU2 switch
1 x SPS 70V 140/280 A
1 x Prolonguer for Balancer Thunder Power 6S
1 x Pin hinge 34x16 mm (10 uds)
1 x BETA 1400 ARF Red
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Pin hinge 39x20 mm (10 uds)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x MPS Gas-Cap-Powerswitch
1 x Conector MT-60 (pair)
1 x Ciano KAVAN Medium 20g
1 x Kavan Car 25% nitro 1l
1 x XT60 Connector with Holder Male 2pcs
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Conector MR-60 (pareja)
1 x SKY RC T400Q Charger 4x100w
1 x Engine mounts for .09 - .19 engine
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x KAVAN CA Activator 150ml
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x Ball Bearing Oil 25 ml
1 x Electric Fuel Pump 12v
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Glow starter with charger 230v
1 x Autogyro Cierva C30 Spain
1 x LA500 rotor head core
1 x Bearing housing
1 x Rotor Mast
4,311.40EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies