Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock	Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock
Opto Gas Engine Kill Switch temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	Connectors banna oro 2 mm (M/F) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Towing hook <3m
1 x	Towing hook
1 x	Tow hook for tug
1 x	Fixed launching hook
1 x	25 mm reinforced hinge
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	18 mm reinforced hinge
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Large flex hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	15 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Optical RPM Sensor
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Digital weight, angle and balance meter BASIC
1 x	1/6 Pilot "Garry"
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Big Crow DLE-170M
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Actuador lineal HLS12-100210-7.4v
2 x	Spare Part Frame Set for EACHINE RACER 250
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support Pitot JETI
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	76x23 Ø3.5 mm aluminium core wheel
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	120x60 mm SLH KOVO wheel
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	44.5x17 mm (1.75") Type jets aluminium core wheel
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Round flex hinge (12 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	METEOR 1.000 mm kit
1 x	Electric spoiler 185 mm (2 pcs)
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Paint gun for sprays
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	ARTIST 1.560 mm
1 x	Astra (Top Model)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Canopy Astra
1 x	Canopy Sweet / Siesta
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Propeller POWER-PROP 7x7
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Axle wheel with accesories
1 x	Propeller APC 11x10 Electric
1 x	Bird (Aero-naut)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Propeller Pleg CAM Carbon 16x13
1 x	Nose wheel 62 mm
1 x	NoNa BB wheel Ø200x60mm in pair
1 x	Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Ball joint long
1 x	Steering lever
1 x	Screw M3x16
1 x	Head spacer
1 x	Head lower part
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Aluminun wheel collar 4 mm Ø (4 uds)

2,670.48EUR