2 x | Motor A2212/13T |
2 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 2,5x60 mm allen screwdriver |
2 x | Z Bender - S Type Tool |
2 x | Digital scale up to 40 kg |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Vacuum pump P1-N |
1 x | Dust collector for mould cleaning |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Copier 5x20 cm pcs |
1 x | 2,0x50 mm allen screwdriver |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | Copier 2x20 cm pcs |
1 x | Starter 12v (Max 90 and 15ccm) |
3 x | Field folding model stand SebArt |
2 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Propeller balancer |
2 x | Medidor ángulos y/o incidencias |
1 x | Angle measurer |
1 x | Surface Indicator Gauge Small |
1 x | Angle of incidence meter |
1 x | WingFix ULTRA Black Edition |
1 x | Field folding model stand |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
3 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
3 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Angle support XT60 conector |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Baseplate servo |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Carbon blade 3D 230 mm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Welder 100W/200V |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Motor holder for AC 28/7 |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Cooler motor type 300 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | PPS-4D Propeller |
1 x | Hot Glue Stick GREEN |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Combo lighting module with covering drop shape |
2 x | Piloto jet 130 mm |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Control horn long w/ball |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn mando long (2 pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Propeller balancer |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | PVC grid straight 290x185x0.32 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | 1/12 Pilot "Cougar" |
1 x | 1/10 Pilot "Jack" |
2 x | Piloto JET 1:3,5 |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Blade holder metal LAMA |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Ciano KAVAN Super Thin 20g |
1 x | Kavan Car 25% nitro 1l |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Engine mounts for .09 - .19 engine |
1 x | |
1 x | Glow starter with charger 230v |
1 x | Charger SKY RC e680 |
1 x | Conector MR-60 (pareja) |
2 x | Conector MT-60 (pair) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Spinner 40 mm Black (Kavan) |
2 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Screwdriver for Torx® TX6 |
1 x | Cut tube |
1 x | Crimping tool |
1 x | Z Bender - S Type Tool |
1 x | Crimping tool |
2 x | Starter EM Gear Power 80 |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Metalic nose for PROJETI |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Lense for Spotlights, 20mm |
1 x | 1/6 Pilot "John" |
1 x | 1/12 Pilot "Fighter" |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Tool for entel |
1 x | Mold plugs XT-90 |
1 x | Cooler motor type 150 |
1 x | XT-60 Plug Mold |
1 x | MPX plug mold V1 |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Release film 100 cm x 50 m |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium ignition bad (red) |
1 x | Marker ties (20 pcs) |
1 x | Aluminium battery holder red |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 20 mm gas motor standoff |
1 x | 10 mm floating pad (72 pcs) |
1 x | wire tensioner (red) |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Motor mount M |
1 x | 45 mm gas motor standoff |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Jeti Advance Plus Program Card |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | |
2 x | 6 mm M3 variable horn |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Pilot "Goose" (Slimline) |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Spinner 50 mm White (Kavan) |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | BETA 1400 ARF Red |
1 x | Cable coupler M3 (10 uds) |
1 x | Horn 5/10 with M2 Bearing |
1 x | 5 mm M2 variable horn |
1 x | Small adjustable control horn with bearing |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
1 x | Spinner 55 mm White (Kavan) |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Carbon plate 350x150x1.5 mm |
1 x | wire tensioner (blue) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Ciano KAVAN Thin 20g |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
|
21,428.46EUR |