Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
4 x	Extension silicon 30 cm female (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Cabel "Y" 30 cm (graupner)
2 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 75 cm (Futaba)
2 x	Extension silicon 50 cm (Futaba)
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension silicon 35 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension PVC 150 cm (Graupner)
2 x	Extension silicon 10 cm (Futaba)
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 100 cm (Futaba)
2 x	Extension silicon 25 cm (Futaba)
4 x	Cable silicona female batt. receptor 30 cm (Futaba)
2 x	Circlick securite
2 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba male 40 cm extension
2 x	Extension 7.5 cm
1 x	Extension 100 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Premium servo extension 50cm
1 x	Premium servo extension 25cm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Cable S.BUS 3 salidas 300 mm
2 x	Stickers-digit for marking
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	2,0x50 mm allen screwdriver
1 x	Dust collector for mould cleaning
1 x	Hexagonal ball head 2.0 x 50 mm
3 x	Hot Glue Stick RED
1 x	Cut tube
1 x	Starter EM Gear Power 250
2 x	2,5x60 mm allen screwdriver
1 x	Vacuum pump 12 CFM
1 x	Z Bender - S Type Tool
2 x	Starter Sullivan-STAR 601
1 x	Crimping tool
2 x	Copier 5x20 cm pcs
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Starter Sullivan-STAR 603 DINATRON
1 x
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x
1 x	Screwdriver for Torx® TX8
1 x	Crimping tool
1 x	Copier 2x20 cm pcs
1 x	Digital scale up to 40 kg
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Digital precision scale up to 2000 g
2 x	Gates hinge 30x16 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	290x4 mm M4 shaft ship
1 x	3 mm Leader (L 100 mm)
1 x	39,0 mm propeller (left propeller)
1 x	Extension 90 cm (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Cabel "Y" 15 cm
1 x	Extension 15 cm (Futaba)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	25 mm reinforced hinge
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Extension silicon 50 cm (Graupner)
2 x	Threaded insert M4 (4 pcs)
1 x	Socket Head Screw M2x8
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Screw M3x5 (10 pcs)
1 x	Socket Screw M3x9 mm
2 x	Tapping Screw M2.9x9.5 (10 pcs)
2 x	Socket Head Screw M2x12
2 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Screw M3x8(10 pcs)
2 x	Threaded insert M6 (10 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
3 x	ABS "T" angle 4.0x4.0x1000 mm
3 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
2 x	15 mm reinforced hinge
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	Disposable Injector Bags (30x16cm) 100 pcs
2 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Tachometer HANGAR 9 digital
1 x	Mold plugs XT-90
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	Mini Infrared Thermomiter
1 x	Precision wrench L100 mm
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Propeller diller 5/6,3/8/9
2 x	Turbine KINGTECH K85 G4
1 x	Xoar Electric Beechwood Prop 15x8
2 x	KingTech T-Modul 5 in 1 Telemetry
2 x	FOD Screen K140G/K180G/K210G
2 x	Battery LiFe -2100/25C-3S 9.9V
2 x	Turbina KINGTECH K120 G4
1 x	Turbina KINGTECH K180 G4+
1 x	Burner Plug K30/ K45
1 x	Xoar Electric Beechwood Prop 21x10
2 x	Exhaust K45TP
2 x	Scale exhaust K45TP
2 x	Turbina KINGTECH K70G4
2 x	Battery LiFe -3800/25C-3S 9.9V
2 x	Clamp K30 G3
2 x	Bomba KP500V Kingtech
2 x	Turbina KINGTECH K65 G4+
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Turbina KINGTECH K260 G4
1 x	KingTech Turbineoil 5L
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Scale exhaust K100TP
1 x	KingTech Turbineoil 10L
1 x	Turbina KINGTECH K320 G5
2 x	Filter KingTech
1 x	KingTech K45TP G4 Turboprop
1 x	Turbine KINGTECH K100 G4
2 x	GSU Kingtech
2 x	Kerostarter K30G
1 x	RX Battery Eneloop 6,0 V JR 2500 mAh
1 x	Turbina KINGTECH K142 G4M
1 x	Sanyo TX Battery Eneloop 9,6 V Hitec
1 x	FOD Screen K45/60/70/85
1 x	Turbine KingTech K30G Restart
1 x	Sanyo RX Battery Eneloop 6,0 V Futaba
1 x	KingTech K100TP G4+ Turboprop
1 x	Turbina KINGTECH K55G4
1 x	Turbine KingTech K45G4+
1 x	Carburetor DLE 170
1 x	DLE Ignition 170M
1 x	BOX-Setup Actro-marine
1 x	Carburetor for ZG45SL and ZG62/S/SL
1 x	Insulator ZG 20
2 x	Profile ABS half cane 4x1000 mm
1 x	DLE Ignition 111/120/170
1 x	Cyano INSTA - CURE™ (56g)
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	DLE 55 Muffler
1 x	DLE 55 Ignition unit
1 x	Catalyst INSTA - SET™ (60g)
1 x	Canister combo DLE 170 cc
1 x	Canister combo DLE 120 cc
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	CILINDER FOR DLE55, DLE111, DLE222
1 x	Cilinder DLE 30 - DLE 60
1 x
1 x	Carburetor DLE 30
1 x	DLE-55RA Ignition unit
1 x	Thread locker IC-Loc™ red "high" 10 ml
1 x	Aqua RACE 70 (without motor)
1 x	Large flex hinge (12 uds)
1 x	Pan Head Screw M1,6x8 (10 pcs)
1 x	Screw M4x20 (10 pcs)
1 x	Spring pin Ø 2 x 6 mm (10 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Locking cable tie 4.6x203 (uds)
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	18x10 BIELA propeller SCALE (3-blades)
1 x	16x10 BIELA propeller (3-blades)
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
2 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Propeller drill jig DA-35/50/60/70
1 x	Heli digital angle measurer
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Regulador Actro-Marine 80A
1 x	Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x	Gasket carburettor/insulator for ZG 38/S/SC
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	Header ZG 45/62, "normal"
1 x
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Blind nut M5 (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Threaded insert M5 (10 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Screw M3x16 (10 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Nut for mounting M2 (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Locking cable tie 3.2x142 (uds)
1 x	2,3 mm Prop Drive Günther M4
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Adapter 3,0 mm M8
1 x	2,3 mm Prop Adapter M5
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Cyano ULTRA - CURE™ (21g)
2 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	ABS angle 10,0x10,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS angle 5,0x5,0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Rubber profile 6-2 mm 2M
2 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	T-Connector 4.0 mm x 1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Propeller APC 8x4 Glow/Gas
1 x	24x10 BIELA Sport 3Bl propeller (3-blades)
1 x	18x8 BIELA 3Bl propeller (3-blades)
1 x	18x8 BIELA propeller
1 x	EC-Cutter
1 x	Pistola termica MH 550 micro
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Servo Robbe FS 525 BB MG HV
1 x	25 mm Sandpaper file
1 x	1,5x50 mm allen screwdriver
1 x	ALU servo arm 3 mm shaft
1 x	100g Flux Paste for Silver Solder
1 x	Servo AN-20 MGBBA
1 x	Digital weight, angle and balance meter BASIC
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Gear for D 54
1 x	Heli blades angle measurer
1 x	Latex Gloves GRIP, size L, box/ 100 pcs

55,150.39EUR