1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Disipador motor tipo 300
2 x Disipador motor tipo 400
2 x Disipador motor tipo 150
1 x Kit motor ikarus indoor motor escobillas
1 x Disipador axial para motores MPJ AC 25/25-xx
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Gafas FPV Eachine EV800D
1 x Antena helicoidal RHA 5.8 GHz (SMA plug) 12 dBi
2 x Disipador motor tipo 280
2 x Disipador radial para motores MPJ AC 25/35-xx
1 x Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Soporte conector MPX enrasado (6 pcs)
1 x Gancho de lanzamiento regulable
1 x Soporte Antena 2.4 Ghz (2 pcs)
2 x Acople ALU M2,5 Ø 3 (2 uds)
1 x Horn aluminio anodiazado 6 mm rojo con rótula
1 x Soporte filtro FESTO (4 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Horn control flaps (1 pcs)
2 x Acople ALU M3 Ø 4 (2 uds)
1 x Cargador LiPo Charger4
1 x Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x Soporte grifo FESTO (2 pcs)
1 x Gancho de remolque + 4,5 m
1 x Acople ALU M2 Ø 3 (2 uds)
1 x Horn aluminio LH largo L31xH30 (2pcs)
1 x Horn de mando 5/10 con rótula M2
1 x Horn aluminio pequeño azul (2pcs)
1 x Soporte bomba/flitro Xicoy X45
1 x Soporte ECU Xicoy X-45
2 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Horn aluminio RH largo (2pcs)
1 x Soporte Filtro FESTO
1 x Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x Bomba Combustible RX V2
1 x Anemometro Xplorer1
1 x Bomba de humo JETs PowerBox 2 salidas
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x Cargador USB 120-240V AC
1 x Polo Hispano Aviación
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x Prolong/Adap correa FF9-DX7-JR-Hitec
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Prolong/Adap correa Futaba T-10CG
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
1 x Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x Fibra carbono tela 160g/m2 127 cm x 5 m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x Servo NARO Max Std
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Recambio lonas Hovercraft
1 x Hélice POWER-PROP 7x7
1 x Adaptadores carga 6s JST-XH
1 x Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x Adaptador de hélice 2 mm M5
1 x Adaptador de hélice 3 mm M5 (corto)
1 x Bujía 1/4-32
1 x Bujía DLE CM6
1 x Acople ALU Izda. M3 Ø 4 (2 uds)
1 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x Acoplador M2,5 Ø 3 mm (10 pcs)
1 x Adaptador de hélice 3 mm M5 (largo)
1 x Acoplador M2 (10 uds)
1 x Adaptador de hélice 2,3 mm M5
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Batería Sanyo Eneloop RX 6,0 V Futaba
1 x Cable con accesorios
1 x Batería Sanyo Eneloop TX 9,6 V Hitec
1 x Peel Ply liso 64 g/m2 150 cm x 20 m
1 x Bomba de gasolina eléctrica 12V
1 x Cargador POWER PEAK D7 EQ-BID 12V/230V-Duo
1 x Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x Plancha fibra vidrio 350x150x1.0 mm
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Pipa bujía DLE-111
1 x Bujía 1/4-32 EVO 10GX
1 x Bujía 1/4-32 Glow
1 x Bujía Champion RCJ-7Y para ZG
1 x Bujía motor OS nº 8
1 x Bujía motor OS Tipo F
1 x Bujía motor OS nº 3
1 x Bujia OS G5 gasolina
1 x Bujía ROSSI R8
1 x Bujía NGK CM6
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Soporte reenvio para freno retractil
1 x Tren retráctil neumático tripata (Aero-Naut)
1 x Soporte Pitot JETI
1 x Válvula de doble acción PRO-HV
1 x Tren retráctil neumático tripata (Jet Legend)
1 x Rueda de cola de 28 mm
1 x Horn de mando 5/15 con rótula M2
1 x Batería Sanyo Eneloop AAA 1,2 V 800 mAh
1 x Horn de mando 6/20 con rótula M3
1 x Batería Sanyo Eneloop TX 9,6 V 2500 mAh
1 x Horn de mando 6/35 con rótula M3
1 x Plancha estireno 320x120x0.5 mm
1 x Rodillo teflon 80 mm x 15 mm Diam.
1 x Peel Ply liso 95 g/m2 100 mm x 100 m
1 x Turbina XICOY X95 compact
1 x Turbina X132 H "Compact Version"
1 x Bomba Humo Variable
2 x Gorra Hispano Aviación
1 x Chaqueta Hispano Aviación
1 x Plancha fibra vidrio 350x150x0.5 mm
1 x Plancha fibra vidrio 620x540x3,2 mm
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Plancha fibra vidrio 350x150x2.5 mm
1 x Plancha fibra vidrio 620x540x1,0 mm
1 x Anemometro Xplorer4
1 x Plancha de goma espuma (310x210x5 mm)
1 x Plancha fibra vidrio 350x150x0.3 mm
2 x Chaleco Hispano Aviación
9,357.48EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas