1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 800TVL CMOS camera for FPV
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CM-3
1 x TrainerCord (master-learner)
1 x TP/TopFuel - XH 2/3S Adapter
1 x 30 cm BEC cable (male)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Round Rod 1,5x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
2 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
2 x Round Rod 4,0x1000 mm
2 x Stickers-digit for marking
1 x Strip 2,0x2,0x330 mm
3 x Round Rod 3,0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
2 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
2 x ABS I Strip 20x10x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
2 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
3 x 1 m servo "Premium" wire (white/red/blue)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x PVC 0,14 qmm servos wire Graupner (100 m)
2 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x 100m servo "Premium" wire (white/red/blue)
3 x Shirt Hispano Aviación
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension silicon 30 cm female (Graupner)
2 x Tape GFK 38 mm
1 x SE Ring 480 mm (2 pcs)
1 x 
3 x Extension silicon 30 cm male (Futaba)
2 x Cable S.BUS 3 salidas 100 mm
1 x Extension 90 cm (Futaba)
2 x Extension silicon 100 cm (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Premium servo extension 50cm
1 x SE Ring 360 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x SE Ring 450 mm (2 pcs)
1 x Futaba male 40 cm extension
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension silicon 100 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Foil for sticking flaps and ailerons
2 x 200 mm extensión servo HITEC/JR
1 x Cabel "Y" 15 cm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Extension 30 cm (Futaba)
1 x Circlick securite
1 x Premium servo extension 100cm
2 x Marker ties (20 pcs)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x SE Ring 300 mm (2 pcs)
1 x Extension silicon 35 cm male (Futaba)
2 x Extension 15 cm (Futaba)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
2 x SE Ring 400 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 20x1000 mm Ring Strap Back To Back
2 x Cinta Goldfix 1m
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 30 cm female (Futaba)
1 x Tape GFK 25 mm
1 x SE Ring 330 mm (4 pcs)
1 x Tape GFK 50 mm
1 x USB Mini Camera endoscope
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x 1/10 Pilot "Jack"
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x DPSI LR-S (with push buttons)
1 x Switch magnet for gas cap and magnet switch actuators
2 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x PIX Hawk with accesories
1 x Electronic switch JETI SP06 Opto
2 x Round Rod 1,25x1000 mm
1 x Cable video GoPro
1 x Extension 5 lipos JST/C
1 x USB Interface Adapter
1 x Strip ABS 2.0x10.0x1000 mm
2 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
2 x Round Rod 5,0x1000 mm
1 x NF-3XL set
1 x Blades 330mm
1 x Strip 3,5x1,75x330 mm
1 x ABS I Strip 10x5x1000 mm
2 x NF-3m Heli Kit
1 x NF-2 RC set
1 x Swashplate metal LAMA
2 x Crystal Universal RX 35.090 Ch 69
1 x Protective Cover for wires Ø 6 mm 1000 mm
2 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x Cable set Premium™ MAXI "one4two"
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x 5 line servos wire black (1 m)
2 x Silicone black 6,0 qmm wire (25 m)
1 x Cable set PREMIUM , fuselage/wing one4one
2 x Black silicone 0,25 mm² wire (25 m)
1 x Silicone black 6,0 qmm wire ( 1 m)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Fiberglass heat shield Ø 8 mm 1000 mm
2 x Transmitter Crystal 35 Mc/s Ch 77
2 x Crystal Universal RX 35.040 Ch 64
2 x Crystal Universal RX 35.020 Ch 62
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Crystal TX 35.010 Ch 61
1 x T-shape holder metal LAMA
3 x Transmitter Crystal 35 Mc/s Ch 62
2 x RCEXL Electronic ignition twin A-02
2 x Crystal TX 35.150 Ch 75
1 x Split M1,2x10 (10 pcs)
1 x Split pin 1.6x16 mm (10 uds)
1 x Wing bolts M3 Steel screw Red (2 pcs)
2 x 90 mm rods + T patellas set for direction control
1 x Window mounting channel 5m
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x Short ball link M3 (6 uds)
1 x Long ball link M1.6 (6 uds)
1 x Carbon blade 230 mm
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
2 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x 200m servo "Premium" wire (white/red/blue)
2 x Protective Cover for wires Ø 20 mm 1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Protective Cover for wires Ø 3 mm 1000 mm
2 x Extension MPX-MPX 20 cm
2 x Prolongador S-Bus JR/JR 20cm
1 x Premium servo extension 25cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension silicon 50 cm (Graupner)
1 x SE Ring 240 mm (2 pcs)
1 x Propeller hub spacer 8/5.5
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 45 mm rods set for direction control
2 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Astra wing Joinner (Top Model)
1 x Turbina JetsMunt M166TS
1 x CARBON CUB 15cc ARF 2280 mm
2 x Bidule 111 3000 mm
1 x Bidule 55 2460 mm Cabina
1 x SKY MASTER 3.000 mm ARF
1 x Dean "T" - Futaba Adapter
1 x Axle for motor A50-L
1 x Motor B20-18 L + 4:1 gearbox
1 x Motor B40-10 L
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Motor ORBIT 20-12 with coolingfan
1 x Crystal Universal RX 35.140 Ch 74
1 x DLE Ignition unit
1 x Crystal Universal RX 35.030 Ch 63
1 x Crystal RX 35.120 Ch 72
1 x Propeller MENZ-S 15x10
1 x Propeller MENZ-S 21x10
1 x Propeller MENZ-S 20x10
1 x Propeller MENZ-S 15x8 3 blades
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x 13 mm wing servo holder
1 x BULLIT Wing 840 mm
2 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Electric spoiler 440 mm (2 pcs)
1 x Head runner
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Bearing housing
1 x LA500 cyclic central part
1 x LA500 tail empennage
1 x Round Rod 1,0x1000 mm
1 x LA500 Autogyro
2 x ABS Strip 1.0x4.0x1000 mm
1 x Motor A200-6
1 x Red silicone 1,0 qmm wire (50 m)
1 x Silicone red 0,5 qmm wire ( 1 m)
1 x Motor A30-14 L V4
1 x Motor B20-10 L + 4:1 gearbox
1 x Motor A30-12 L V4
1 x Motor Mega AC 16/15/04 COMBAT
1 x Mega Motor RC 400 F5J 1950KV
1 x Cap Hispano Aviación
1 x Crystal Universal RX 35.070 Ch 67
1 x Crystal TX 35.100 Ch 70
1 x Crystal Universal RX 35.170 Ch 77
1 x Compact on-board starting system (9715)
1 x GLOW 9C + accesories
1 x Electromotor starter EME 35cc
1 x Opto Gas Engine Kill Switch
1 x Compact on-board starting system (9724)
1 x GLOW 2C + accesories
1 x Starter EM Gear Power 250
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Ignition bed V2 Red color
1 x Crystal TX 35.180 Ch 78
1 x Crystal TX 35.050 Ch 65
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Blade holder metal LAMA
1 x Coversion set HIROBO EX/EAGLE elektro
1 x Propeller MENZ-S 16x12
1 x Propeller MENZ-S 17x10
1 x Propeller MENZ-S 20x10 3 blades
1 x Propeller MENZ-S 16x10 3-Blades
1 x Propeller MENZ-S 16x8
1 x Propeller MENZ-S 21x8
1 x Propeller MENZ-S 15x8
1 x Propeller MENZ-S 21x12
1 x Propeller MENZ-S 16x6
1 x Propeller MENZ-S 20x8
1 x Propeller MENZ-S 15x6 3 blades
1 x Propeller MENZ-S 15x6
1 x Propeller MENZ-S 21x10 3-Blades
1 x Propeller MENZ-S 20x12 3 blades
1 x Propeller MENZ-S 20x9
1 x Propeller MENZ-S 18x8
1 x Propeller MENZ-S 19x8
1 x Propeller MENZ-S 18x6
1 x Propeller MENZ-S 19x12
1 x Propeller MENZ-S 20x6
1 x Propeller MENZ-S 20x12
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x Servo HITEC D145 SW
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x DPS Switch JR/JR
1 x Actuador lineal HLS12-100210-7.4v
1 x Servo Digital HITEC HS-5065 MG
16,242.17EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies