Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
PowerBox SparkSwitch RS unregulated
PowerBox SparkSwitch RS unregulated
69.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x Frontal Adapter for AXI53xx
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
3 x 8 mm Adapter for AXI53xx
3 x Ferrita 14x8x5.5 mm
1 x Servo NARO Max Std
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Jeti Black cap
1 x 
1 x Foil for sticking flaps and ailerons
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Profile ABS half cane 2.5x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
3 x ABS angle 1.5x1.5x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
3 x L-Connector 1.0 mm x 1000 mm
2 x Cross Connector 4.0 mm x 1000 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x Aluminium red ball links M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x ABS tube 6.0x5.0x1000 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x AXI 2814/12 V2
1 x PYRO 800-48 Long Axi
1 x Axle for motor A20-S (3 uds)
1 x Motor A30-14 M V2 6 Poles
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x Motor Mega AC 16/25/03
1 x Quick hose connector 6-4 mm
1 x Motor Mega AC 16/07/06
1 x Motor 2212 (1000KV) Quadcopter F450
1 x PHASOR RACE 2035/4100 1D
1 x Hose clips 6 mm
1 x Motor Mega AC 16/15/04 COMBAT
2 x Junta humo metalica G35 DLE35
1 x Opto Gas Engine Kill Switch
1 x FESTO connector M7 barb fitting 4mm
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x FESTO connector M7 Quick 4mm 90º
1 x Quick hose connector 6-6 mm
1 x Suction funnel for carburetor 90D-L (red)
1 x Compact on-board starting system (9715)
1 x Quick hose connector 3-3 mm
1 x Motor Mega AC 16/07/03
1 x Compact on-board starting system (9525)
1 x Propeller diller for DLE170
3 x O-ring Saito FG-73 5cyl
1 x Motor Mega AC 22/35 4S
2 x Powerset FunJet 2 with Vectorcontrol unit
1 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x Soporte filtro FESTO (4 pcs)
1 x Suncover 100cc Red
1 x wire tensioner (red)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Rubber profile 6-2 mm 2M
2 x ABS "T" angle 10.0x10.0x1000 mm
2 x Profile ABS half cane 6.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS Square 2 x 1000 mm
2 x ABS rectangular profile 12x6.0x1000 mm
2 x ABS rectangular profile 10x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x L-Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
2 x 63 mm INO spinner (carbon imitation)
1 x 102 mm INO spinner (carbon imitation)
2 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
2 x 89 mm INO spinner (carbon imitation)
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x F3A carbon 85 mm spinner for AXI
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
2 x Charger LiPo Charger4
1 x Profile ABS half cane 7.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
2 x Profile ABS half cane 8.0x1000 mm
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Cable coupler M2 (10 uds)
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Pulley brass 6/1,5 (2 pcs)
1 x Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x Pull-Pull complet set with CF rudder double servo arm
1 x Softshell Hispano Aviación
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Giant Scale Muffler D.A. 70
1 x Propeller MENZ-S 24x8
1 x Prop Holder AXI 41xx V2
1 x DLE 30 complete electronic ignition
1 x GLOW 9C + accesories
1 x Compact on-board starting system (9512)
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Pitts Muffler kit for CAP 21
1 x Spring clamp for tube Ø50 mm
1 x Spring Clip Ø25 mm
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Motor OS 3805-1200 electric
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Prop Saver for AXI 22xx/xx
2 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x Universal Prop Saver
1 x Motor holder AXI
1 x Reguladro ACTROCON 60A
1 x Motor ACTRO 35-4-1100
1 x Motor ACTRO 28-4-880
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 3 mm Long Prop Adapter M5
1 x Propeller electric carbon 8.5x5
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x resin-hardener L-385 H-385 (625 g)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Angle support XT60 conector
1 x Support Filtro FESTO
1 x Tape GFK 50 mm
1 x FIALA Propeller 23x8 Electric
1 x Spinner INOVA 45 mm White
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner 82mm Black ventilado
1 x 57 mm INO spinner (carbon imitation)
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Motor RACE 720 Navy 12v
1 x BOX-Setup Actro-marine
1 x Aqua RACE 70 (without motor)
1 x ESC Actro-Marine 30A
1 x Regulador NAVY 540R
1 x Race Outboard MERCURY type A
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Stickers-digit for marking
1 x Mould Resin P 10 kg
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x resin-hardener package L-385 with hardener H-385
7,884.29EUR
Manufacturers
Manufacturer Info
Saito
- Other products
Notifications
NotificationsNotify me of updates to SAITO FG-120 TSS Boxer 4T
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce