Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock
Propeller MENZ-S 18x12 temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Filler Gauges
1 x	Recess mount-rem. glow plug set
1 x	O-ring Saito FG-73 5cyl
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Opto Gas Engine Kill Switch
1 x	Compact on-board starting system (9512)
1 x	Propadapter for motor A50-V3
1 x	120x60 mm SLH KOVO wheel
1 x	Screwdriver for Hexagon 1,5mm
1 x	SLICK 360-A 104" (2640 mm)
1 x	EDGE 540-A 105" (2660 mm)
1 x	EXTRA NG 85" 2159mm yellow/blue
2 x	ANGEL 48" pp red/blue/white
1 x	ANGEL 48" pp orange/black/white
1 x	EDGE 540-A 74" (1880 mm)
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	EDGE 540-A 91" (2310 mm)
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	LASER 260 60" V2 ARF Red (SkyWing)
3 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Propeller Pleg CAM Carbon 15x8
1 x	Motor OS FS-62V 4T
1 x	Motor OS 81 FS 4T
1 x	Captador OS GT 33 cc
1 x	Bujia OS G5 gasolina
1 x	Motor OS 37 SZ-H
1 x	Motor OS FS 95 V 4T
1 x	STD excentric gearbox for 2,0mm axis (5,0:1)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Planetary gearbox(3,8:1)
1 x	Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Starter EM Gear Power 250
1 x	Sealing Iron Sleeve PROF
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Heli blades angle measurer
1 x	Heat Seal Iron
1 x	Precision wrench L100 mm
1 x	Hot Glue Stick BLACK
1 x	Kwik link unmount tool
1 x	Propeller drill jig DA-35/50/60/70
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	76x23 Ø3.5 mm aluminium core wheel
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Gearbox for VM motors (3:1)
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x	120x60 mm C SLH KOVO wheel
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	STD gearbox for Speed 480 3,2mm axis (2,33:1)
1 x	Planetary gearbox(3,8:1)
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Rubber Insert hard, 1 Pcs.
2 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Starter Sullivan-STAR 601
1 x	Sealing Iron Profi LCD
1 x	Rubber Insert soft, 1 Pcs.
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	Mold plugs XT-30
1 x	Mini-handed clamp
1 x	MPX 8 pins plug mold
1 x	Mini Infrared Thermomiter
1 x	Propeller diller for DLE111 and DA85-150
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Hot Glue Stick RED
1 x	Shaft sleeve LAMA
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Heli digital angle measurer
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
1 x	Excentric gearbox for 3,2mm axis (4,1:1)
1 x	Crystal RX 35.140 Ch 74
1 x	Nylon threaded block M4 (2 uds)
1 x	Spinner propeller pleg. 42 mm/6,0 mm/0º
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	Spinner propeller pleg. 36 mm/6,0 mm/0º
1 x	CN-Spinner propeller pleg. 36 mm / 6 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Central piece 47 mm - 2,5º
1 x	Nylon gear block Ø 5 mm (2 uds)
1 x	Universal Filter
1 x	Steel brush wheel with 2.35mm
1 x	Manometer 4 mm
1 x	Crystal RX 35.030 Ch 63
1 x	40 mm black plastic spinner for fixed propeller
1 x	42 mm white plastic spinner for folding propeller
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	25 mm Sandpaper file
1 x	Festo 4mm Tubing Holder (10 uds)
1 x	Neumatic retractable landing gear (Aero-Naut)

12,928.21EUR