Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Turbina XICOY X195 compact
2,959.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Servo JETI DSHV 3D13T (13 Kg)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
2 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
2 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
3 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
2 x	Perfil Acero Inox. 11.5x6.5x1000 mm
2 x	Conector ABS "L" 4.0 mm x 1000 mm
2 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
2 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Liston ABS 1,5x6,0x1000 mm
2 x	Liston ABS I 10x5x1000 mm
2 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Varilla ABS 1,5x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
2 x	Varilla ABS 4,0x1000 mm
2 x	Liston ABS I 20x10x1000 mm
3 x	Liston ABS 2.0x8.0x1000 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Varilla ABS 1,0x1000 mm
2 x	Varilla ABS 3,0x1000 mm
1 x	Servo HITEC HS-225 MG
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-5084 MG
1 x	Servo HITEC D131 MW nano
2 x	Servo HITEC HS-5485 HB Digi
1 x	Programador HPP-25 PLUS HITEC digital servos Campo de Vuelo
1 x	Servo HITEC D145 SW
1 x	Servo HITEC D625 MW
1 x	Servo HITEC HS-53
1 x	Servo HITEC HS-485 HB
1 x	Servo HITEC HS-5475 HB Digi
1 x	Servo HITEC D954 TW
1 x	Caja servo HS-225MG/225BB/5245MG
1 x	Servo HITEC D941 TW
1 x	Servo HITEC HS-45 HB, caja servo
1 x	Servo HITEC HS-311
1 x	Servo HITEC HS-225 BB
3 x	Servo HITEC HS-125 MG
1 x	Servo HITEC HS-55
1 x	Bancada servo alas HS80/HS81/82/85 (2 pcs)
1 x	Servo HITEC HS-5245 MG Digi
1 x	Servo HITEC HS-45 HB
1 x	Servo HITEC HS-5070 MH Hi Volt
2 x	Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x	Oracover Rojo Fluor (2 m)
1 x	Brazo servo DOBLE Savox SH-81 aluminio
1 x	Tapaporos 500 ml (DOPE)
1 x	Servo DITEX EL0510M
1 x	Bancada servo tandem 3,5-4" para 2 servos
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Logo 400 SE VBar
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Acoplador M2 (10 uds)
1 x	Terminales riostras M2 (10 uds)
1 x	Terminales riostras M2 (10 uds)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Terminales riostras M2,5 (2 pcs)
3 x	Tensor de riostras M2,5x27/43 (2pcs)
1 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	Acoplador para cable M4 (10 pcs)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Kwik link pequeño (10 pcs)
1 x	Tensor de riostras M2x22/35 (2pcs)
2 x	Pasacables con soporte GFK "A" (2 pcs)
2 x	Sistema para cables con tensor (silver)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Sistema para cables con tensor (azul)
2 x	Kwik link blanco largo (10 pcs)
1 x	Sistema para cables con tensor (negro)
1 x	Acoplador M3 (10 uds)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x	Sistema para cables (rojo)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Tensor de riostras M3 33x49 (2pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Crimpadora
1 x	Soporte soldadura universal aluminio
1 x	Molde conector Dean-T
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Perfil de ABS de media caña 4x2.5x1000 mm
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Set piñones servo HITEC HS-55
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Servo BMS-4112
1 x	Servo HITEC HS-635HB Carbonite
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Copiador 5 unidades de 20 cm
1 x	Corta tubos aire
1 x	LOGO 600 SX (kit)
1 x	Actuador electrico 25 mm
1 x	Molde conector XT-30
1 x	Perforador hélices DLE170
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Clevis con trasmisión M3
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Tensor de riostras M2x29/43 (2pcs)
1 x	Porta kwiw link M2 (10 pcs)
1 x	Brazo servo aluminio 15-10 mm HITEC
1 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Medidor de ángulos digital para helicóptero
1 x	Molde conector XT-90
1 x	Rueda de acero Proxxon/Dremmel 2,35 mm
1 x	Perforador hélices para EME35 y DLE35
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Pistola termica MH 550 micro
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Plancha entelar Profi LCD
1 x	Hoja sierra PROXXON (50mm-100T) para KS-230
1 x	Lima redonda PERMAGRIT 18 mm para Dremel
1 x	Mango para lima PERMAGRIT
1 x	Lija PERMAGRIT 45° 140x51 mm
1 x	Perforador hélices para DA50, DLE55 rojo
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Goma arrancador KAVAN "soft"
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Plancha para entelar
1 x	Mini termometro infrarrojos
1 x	Tren retráctil neumático tripata (Jet Legend)
1 x	Tapon 22 mm con espiga (Electron)
1 x	Bancada motor ZG45/62, Long: 54 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Catalogo AERO-NAUT 2016 Completo
1 x	Balsa salvavidas 47 mm
1 x	Barandilla L250 mm (10 pcs)
1 x	Articulación para pluma de carga, 10x5 mm (2 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Cinta Roving carbono 20m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Funda plancha entelar STD
1 x	Servo HITEC HSB-9380TH
1 x	Fuera Borda MERCURY type A
1 x	Base montaje Ms 12 mm

5,937.94EUR