1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
4 x SIMtransmitter 6 Mode 2
2 x ABS tube 5.0x4.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
2 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
2 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x 1/10 Pilot "Jack"
2 x Piloto Jet "Green" 1/6 Scale
2 x Pilot "Duke" Legends Series (Slimline)
2 x Civilian pilot "Gramps" size 9cm (Slimline)
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
3 x Piloto RC Civil 1/5- 1/6 Scale 12"
2 x 1/12 Pilot "Tom"
3 x 1/6 Pilot "Cindy"
1 x 1/4 Pilot "Heidi"
2 x Stickers-digit for marking
2 x Xplorer3 anemometro
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Simulador RealFlight RF-9.5 S (sin emisora)
2 x GameCommander USB Universal
2 x Slave-cable USB Easy Sim
2 x Interface Jack Adapter IKARUS
1 x RF9 Flight Simulator with Spektrum Controller
2 x Interface Realflight Simulator
1 x Locking cable tie 2.5x100 (uds)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x USB HLS prog. interface
1 x 2 mm male connector (2 pcs) with safety connector
1 x Windsock Ozone L - 700 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x 1/12 Pilot "Fighter"
2 x 1/6 Pilot "Tony"
2 x 1/10 Pilot "Jimmy"
3 x Pilot "Dick" Legends Series (Slimline)
1 x Xplorer4 anemometro
1 x Bateria DJI Mini 2 2250 mAh
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Civilian pilot "Curt" size 9cm (Slimline)
2 x Piloto jet 130 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x Pilot "Goose" (Slimline)
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Covered closure or fairings
1 x Piston ring for DA-50R and DA-100
1 x Adaptadores carga 6s JST-XH
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x 1/12 Pilot "Langley"
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Bird (Aero-naut)
1 x Canopy F9F Panther (Aero-naut)
1 x Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
1 x 1/7 Pilot "Japanese"
1 x 1/6 Pilot "John"
1 x Xplorer2 anemometro
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x TS832 to Gopro AV/Power Cable
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Receiver R7008HV comatible FUTABA
1 x Receiver RFA05 5Ch compatible FUTABA
1 x Receiver R6008HV-A comatible FUTABA
1 x Receiver RSF08SB comatible FUTABA
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x Avanti S 1.8m Jet White/Blue + Landing gear
1 x Cooler motor type 300
1 x Indoor Brushed motor kit
1 x Motor holder for AC 28/7
1 x Avanti S 1.8m Jet FREECE TRICOLORI
1 x TWIST planeador gomas
1 x MAMBO 17
1 x 
1 x Mini Avanti S 1.4m white/red
1 x TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
16,133.13EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies