430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Horn 5/10 with M2 Bearing
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x White smoke canister 65 g
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Ball link Aluminio M3 (2 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Horn 5/15 with M2 Bearing
2 x Profile ABS Square 1 x 1000 mm
1 x Extension 7.5 cm
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x ABS angle 4,0x4,0x1000 mm
3 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Pilot "Dick" Legends Series (Slimline)
2 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Extension silicon 35 cm male (Futaba)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x ABS "T" angle 10.0x10.0x1000 mm
2 x Rubber profile 6-2 mm 2M
1 x Futaba Female 40 cm extension
1 x Extension PVC 150 cm (Graupner)
2 x Profile ABS triangular 4.0x1000 mm 60º
1 x DYNAMOMETER S-1580
2 x Suncover 100cc Red
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Extension silicon 10 cm (Futaba)
1 x Dremel PERMAGRIT thin lime
1 x Flat washer 1.7 mm (20 pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Crimping tool
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x MPX-Dean "T" Adapter
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Circlik for shaft 1.5 mm (10 pcs)
2 x 2,5x60 mm allen screwdriver
1 x M3-M4 rubber washer (8 pcs)
2 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Foam plastic plates (310x210x2 mm)
1 x L-Connector 1.5 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Hexagonal ball head 2.0 x 50 mm
1 x ABS 500 x 400 x 2,0 mm (white)
2 x ABS 500 x 400 x 1 mm (white)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Buy Perforated film 145 cm / 50 m
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Profile ABS half cane 3x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Profile ABS half cane 6.0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Buy Perforated film 100 cm / 10 m
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x PIX Hawk with accesories
2 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Buy Perforated film 100 cm / 50 m
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Profile ABS half cane 8.0x1000 mm
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Tube Pitot to PIXHAWK
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Rubber profile 8-2 mm 2M
2 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Profile ABS half cane 7.0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Profile ABS Square 4 x 1000 mm
1 x Ball Link Plier
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Torx® TX8
1 x Hot Glue Stick GREEN
1 x Starter Sullivan-STAR 603 DINATRON
1 x Copier 5x20 cm pcs
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Cut tube
1 x Release wax 250ml
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Oracover Yellow CADMIO 10 m
1 x ORACOVER Fluor red (2 m)
1 x Oratex Antik 2m
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Clip fixing for wing (2 pcs)
1 x 80 mm rods set for direction control
1 x SIMtransmitter 6 Mode 2
1 x 45 mm rods + T patellas set for direction control
1 x Spray EC Red 400ml
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Brown 2 m
1 x Oracover Verde 2 m
1 x Canopy Latch
1 x Oracover Azul 2 m
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x 40 mm air cylinder
1 x FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Adapter lead MPX/XT60
1 x APM2.6 Power module with 5.3V DC BEC
1 x 5 LiPo XH>EH adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Panel Honeycom carbon 350x150x3.5mm
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x 30 cm BEC cable (male)
1 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x 2 piece mounting frame
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x L-Connector 4.0 mm x 1000 mm
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Sheet Depron Aero 1250x800x3 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Extension 2/3 lipos JST/C
1 x Servo HITEC D950 TW
1 x Servo HITEC HS-53
9,140.12EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies