36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Buy Perforated film 100 cm / 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Buy Perforated film 100 cm / 10 m
9 x CA Glue fast 20g
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x Carbon plate 1000x500x2,0 mm ECOTECH
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Propeller POWER-PROP 7x7
2 x 120x60 mm SLH KOVO wheel
1 x DINO Glider ARC
1 x MEKP Harderner 100 g
1 x Epoxy 40 min (Resin). 25Kg
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x Epoxy 40 min (Hardener). 10Kg
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x GameCommander USB Universal
1 x Epoxy 40 min (Hardener). 1 Kg
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Epoxy 5 min. 500 g (Hardener)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Adaptadores carga 6s JST-XH
1 x Landing gear axle Ø 6 mm (2 uds)
1 x Motor mount EDGE 540 48"
1 x Landing gear axle Ø 4 mm (2 uds)
1 x TMM 1210-3S heli
1 x TMM 2512-3S heli
1 x Vess propeller 13x6 S
1 x BABY glider (Aero-naut)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x GPS Sensor + Logger OPTronics
1 x Oracover light Grey 2m
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Starter EM Gear Power 80
1 x PARTALL® Hi-Temp Wax, 340 g
1 x UHU hart 35 g
1 x Landing gear Rocket 400
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Black 10 m
5,176.84EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies