2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Cabel charger transmitter GRAUPNER |
3 x | PVC 0,14 qmm servos wire Graupner (100 m) |
5 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | 3 LiPo XH>EH adapter |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
3 x | Cable Cargador FUTABA |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | PVC 0,25 qmm servos wire Graupner (5 m) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | White silicone 0,25 qmm wire (100 m) |
2 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 30 cm BEC cable (female) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
2 x | White silicone 0,25 qmm wire (150 m) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | 4 LiPo XH>EH adapter |
3 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
4 x | PVC 0,35 qmm servos wire Graupner (100 m) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
3 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
3 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Cabel "Y" 30 cm (Futaba) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | Black silicone 0,25 mm² wire (25 m) |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | JR silicone servo wire 0,35 qmm / 5m |
3 x | Vacuum bag, 1200 mm x 50 m |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | 2 LiPo XH>EH adapter |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | 5 LiPo XH>EH adapter |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Small pinned hinge (12 uds) |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | 18 mm reinforced hinge |
1 x | 15 mm reinforced hinge |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
3 x | L-Connector 1.5 mm x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Round Rod 1,5x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
1 x | Glases Innovation Plus |
1 x | Oracover Black 10 m |
1 x | 100 mm rods + T patellas set for direction control |
1 x | M3 Maxi ball link (2 uds) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
2 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
2 x | Carbon plate 700x550x0.5 mm |
2 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
2 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Conector JR Servo female (10 pcs) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Connectors MPX female (PIN double) |
1 x | Conector JR Servo male (10 pcs) |
1 x | MPX Support (2 pcs) |
1 x | XH female balance (5S) connector (2 pcs) |
2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Connectors banna gold 5,5 mm (M/F) |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Circlick securite |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | Film release agent PVA 25 ml |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Medium pin type hinge (12 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
3 x | Silicone red 0,25 mm² wire (25 m) |
4 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | Servo NARO Max Std |
1 x | 1/10 Pilot "Jimmy" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/12 Pilot "Tom" |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Cooler motor type 150 |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
2 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
2 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Black silicone 1,0 qmm wire (50 m) |
2 x | Glases Flitemaster |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | Silicone red 6,0 qmm wire (25 m) |
4 x | ABS 500 x 400 x 1 mm (white) |
1 x | XH male balance (4S) connector (2 pcs) |
3 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Motor Mount for Multiplex FunJet |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Fundas para el transporte F3A alas |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Interruptor RX/Batterie |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
2 x | PIN Connector female (100 pcs) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Carbon plate 350x150x2.0 mm |
2 x | Styrene plate 320x120x0.5 mm |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Styrene plate 320x120x1.0 mm |
1 x | Protector Connector MPX (1 pair) |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 350x150x4.0 mm |
2 x | Carbon plate 350x150x3.0 mm |
2 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
3 x | Mini-handed clamp |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Welder 100W/200V |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Crimping tool |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Connector Sub-D 2+5 Male |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Release film 100 cm x 50 m |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Silicone red 4,0 qmm wire (25 m) |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Red silicone 1,0 qmm wire (50 m) |
2 x | Sheet Depron Aero 1250x800x3 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Conector BEC male (10 pcs) |
2 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | 2 mm female connector (2 pcs) with safety connector |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Conector BEC female (10 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
3 x | Buy Perforated film 100 cm / 50 m |
1 x | Motor mount M |
1 x | Motor holder AXI |
1 x | Motor mount for 1200 mm models |
1 x | Motor holder for AC 28/7 |
1 x | Size "M" motor holder for class 400 |
1 x | Central support Speed 600 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor A20-26 M EVO |
1 x | Axle for motor A50-L |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Size "L" motor holder for class 600 |
1 x | Motor A20-20 L EVO |
1 x | Motor A200-8 |
1 x | Motor A30-14 L V4 |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A50-12 L Glider |
1 x | Bearings for motors hacker A50 |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Motor A40-10S V4 14-Pole |
1 x | Round flex hinge (12 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Canopy Latch |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Release wax 250ml |
1 x | Digital scale up to 40 kg |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | TS832 to Gopro AV/Power Cable |
2 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Propeller MEJLIK 22x10 |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Propeller MEJLIK 29x10S |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | CA Glue fast 20g |
1 x | Foaming agent for epoxy resins 200 g |
1 x | CA Glue (medium) 20g |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Cyanocrylate MD GA460 odourless 20g |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
2 x | Fiberglass plate 620x540x0,3 mm |
1 x | AXI Cooler 41xx |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | DUPLEX case for Jeti DS handheld transmitter |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Ferrita 27x14x7 mm |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Battery charging cable XT60 |
1 x | Steel brush wheel with 2.35mm |
1 x | Servos security connector (2 pcs) |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Servo HITEC D941 TW |
1 x | 18 mm wing servo holder |
2 x | Fiberglass plate 350x150x1.0 mm |
1 x | SERVO DES 707 BB MG |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Connectors MPX male (PIN double) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | SAITO FG-120 TSS Boxer 4T |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | ZEUS F3A 2m |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
3 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Red 4 mm connector holder |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | SSPS105 Super Hi-Power servo |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC HS-311 |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Hitec 52 mm servo arm |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Rudder tandem for two Futaba servos |
1 x | Futaba 2x20 mm servo double arm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Connectors MPX black female |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | DUPLEX backpack for Jeti DS handheld transmitter |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | DC24 II Transmitter case insert |
1 x | SAVAGE Max Red 1080 mm |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
![](images/pixel_black.gif) |
32,832.96EUR |