109.00EUR

GRE-18 RTR Crawler 1:18 Blue
[KAV06GRE18B]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension MPX-MPX 20 cm
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
2 x Starter EM Gear Power 80
1 x Crimping tool
2 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Turbina KINGTECH K320 G5
1 x SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x A/C quality beech plywood 600x300x0.8 mm
2 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x Propeller APC 14x8.5 Electric Pusher
1 x 20 mm carbon horn
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x Piloto JET 1:3,5
1 x Socket head ball link M3 (2 uds)
1 x Ball link M3 (10 pcs, flat ball)
2 x AX-60 starters (5 pcs)
1 x 100 Newtons FEMA absorber
3 x Yellow smoke canister 140 g
1 x Joint with bearing M2 22x5,5
2 x White smoke canister 100 g
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
2 x Blue smoke canister 140 g
2 x Smoke set "S"
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Blue smoke canister 100 g
1 x Electric rocket starters (6 pcs)
1 x "S" set for boats
1 x Parachute expulsion foam
1 x Horn 5/20 with M2 Bearing
1 x Blue metalic ball link M3/3 azul (2 pcs)
2 x Yellow smoke canister 65 g
1 x Socket head ball link M3 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Connectors banna oro 4 mm (M/F)
1 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Red smoke canister 140 g
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Ball link M2,5 (10 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Tube Pitot to PIXHAWK
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Joint with bearing M2,5 22x5,5
2 x Green smoke canister 140 g
1 x 1/12 Pilot "Fighter"
1 x Connectors banna gold 5,5 mm (M/F)
1 x Cable control set
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 300 Newtons FEMA absorber
1 x Short ball link M3 (6 uds)
1 x Brass control horn M4 short for wire (10pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x XH male balance (2S) connector (2 pcs)
2 x 200 Newtons FEMA absorber
1 x Brass control horn M2 short for wire (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x Horn 5/15 with M2 Bearing
1 x Propeller POWER-PROP 7x7
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Glases Nimbus "Black"
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Screwdriver for Hexagon 1,5mm
1 x BALSA triangular 8x8x1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 
1 x 18 mm reinforced hinge
1 x Copier 2x20 cm pcs
1 x Starter Sullivan-STAR 603 DINATRON
1 x BALSA trip 2.0x10.0x1000 mm
1 x 70x23 Ø3.5 mm aluminium core wheel
1 x DYNAMOMETER S-1580
2 x Motor Mega AC 16/07/06
3 x Motor A40-10S V4 14-Pole
1 x Ball Link Plier
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Wheel FEMA 165 mm / 8 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Wheel 38 mm V2
1 x Glases Innovation Plus
1 x Micro flex hinge (12 uds)
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Motor Mega AC 22/20/03
1 x AXI 2808/20 V2 Long
1 x Cooler motor type 400
1 x Cooler motor type 280
1 x AXI 2820/14 V2 Long
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Size "M" motor holder for class 600
1 x Motor Mega AC 22/45/03 E
1 x Frontal support Speed 400/480
1 x Motor Mega AC 16/25/04
1 x Frontal support Speed 600
1 x MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS)
1 x Motor A30-12 XL Glider
1 x Motor A30-12 L V4
2 x Motor Mega AC 16/25/02
1 x Motor A30-14 M V2 6 Poles
2 x Motor A50-12 L Glider
1 x AXI 2820/10 V2
1 x Actuator Electric 25 mm
1 x 20-25mm Servo Arm
1 x Spinner 3BL propeller pleg. 36 mm / 5,0 mm
1 x Central piece 62 mm 0º
1 x Central piece 42 mm 0º
1 x Central piece 42 mm + 5º
1 x Connectors MPX black female
1 x Astra (Top Model)
1 x 2 mm female connector (2 pcs) with safety connector
1 x ALBATROS 3.0 m (orange/white)
1 x Angle measurer
1 x XH female balance (7S) connector (2 pcs)
1 x 90x60 mm standart servo cover
1 x Connectors banna oro 2 mm (M/F)
1 x Bag connector 2 mm
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Propeller Pleg CAM Carbon 15x8
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
2 x EVP Unit for AXI2208/xx and 2212/xx
1 x JETI SPIN 80 Pro
1 x Conector MT-60 (pair)
1 x Captador RCEXL para DA
1 x Servo M2x5/16 screw (4 pcs)
1 x Turbina X132 H "Compact Version"
1 x VPP system propeller for AXI VPP motors (spare)
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Kavan Car 25% nitro 1l
1 x Modulo reglaje avance V3
2 x Actuador lineal HLS12-100210-7.4v
1 x Refueling Cap V3 Black
1 x Oracover light Grey 2m
2 x Conector MR-60 (pareja)
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Black 10 m
2 x Prop Holder AXI 41xx V2
1 x Central piece 47 mm - 5º
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x Spare spinner 65 mm 3-Bl
1 x Battery charging cable XT60
1 x Spare spinner 40/42 mm 3-Bl
1 x Central piece 42 mm - 5º
1 x Central piece 42 mm + 2,5º
1 x Charger ISDT 608AC 200W
1 x 45 mm white plastic spinner for folding propeller
1 x Central piece 52 mm 0º
1 x 50 mm white plastic spinner for folding propeller
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x Central piece 47 mm + 5º
1 x AX-60 starters (5 pcs)
1 x MR30 connector female
1 x Green smoke canister 100 g
1 x Adaptadores carga 6s JST-XH
2 x Red smoke canister 100 g
1 x Albatros ,spare cockpit (Top Model)
1 x 38 mm Alu spinner 5 mm pleg. propeller
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x Bidule 170 ARF 3.48 m
1 x 90x75 mm standart servo cover
1 x Connectors DEANS (T) micro
1 x Conector Servo female 4 pines
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Albatros red/white (Top Model)
1 x Green smoke canister 65 g
1 x Connector CAN 15
1 x BULLIT Wing 1095 mm
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x 800TVL CMOS camera for FPV
1 x Contacto macho pin conector (10 pcs)
1 x White smoke bombs AX-18 (5 pcs)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Ball link M1.6 (6 uds)
2 x Short ball link M1.6 (6 uds)
1 x Absorver mount set for 5-10 Kg models
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Ball link M2 (10 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Motor OS 3820-1200 electric
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x A/C economy plywood 600x300x6+.0 mm
1 x EC-Cutter
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x XH female balance (3S) connector (2 pcs)
1 x Bidule 55 2460 mm Cabina
1 x Magnetic Connect locking system
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Connectors DEANS 4 pins (1 pair)
1 x Protector Connector Dean-T (1 pair)
1 x Mounting frame MPX female connector
1 x 1/6 Pilot "Cindy"
1 x Remote electric ignition system
1 x 120x60 mm SLH KOVO wheel
1 x MPX screwable clips (5 pcs)
1 x 1/6 Pilot "Buddy"
1 x MPX PCB "Gender-Changer (5 pcs)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x White smoke bombs AX-60 (5 pcs)
1 x 1/12 Pilot "Tom"
1 x White smoke canister 65 g
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Ventral support for AX-18/AX-60
1 x Connectors MPX female
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Pilot "Goose" (Slimline)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Ball link M3 (6 uds)
1 x Long ball link M2 (6 uds)
1 x PPM Encoder Module
1 x PIX Hawk with accesories
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Bungee HLG Premium
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x AC-10 pre-rotacion with motor
1 x Catalog AERO-NAUT 2016
1 x Axle for motor A30-XL V2
1 x Shaft for A60-20/22/24S (120 mm)
1 x Motor Mega AC 22/30/02
1 x AXI 2820/8 V2 Long
1 x AXI 2826/12 V2
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x AXI2217/9D
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 8.0x100x1000 mm
1 x 25 mm Sandpaper file
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Birch plywood plate 600x300x4.0 mm
1 x Balsa panel 6.0x100x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x Glases Stratus
1 x Heat Seal Iron
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 2 mm Prop Adapter M5
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x 25 mm reinforced hinge
1 x Gates hinge 30x16 mm (2 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Smart Soldering Iron 110W/230V AC
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Propeller Pleg CAM Carbon 11x6
1 x Central piece 52 mm + 5º
1 x 3l Smoke oil
1 x Sealing Iron STANDARD
1 x Motor B50-14 S
1 x Motor A50-14L Turnado V3 Glider
1 x A40 Backmountset complete
1 x Motor Mega AC 16/25/03
1 x Motor A40-14 L 14-Pole V4
1 x Motor Mega AC 16/25/04 COMBAT
1 x AXI 2826/10 V2
1 x AXI 5320/28 V2
1 x Motor A20-20 L EVO
1 x Z Spinner (CN) 30mm
1 x Spinner propeller pleg. 30 mm / 6,0 mm
1 x Spinner propeller pleg. 38 mm / 5 mm
1 x Spare white 38-45 mm spinner
1 x Canopy Sweet / Siesta
1 x Avia spare blue cockpit (Top Model)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1 x Propeller POWER-PROP 14x9
1 x Motor KAVAN PRO 2225-1600
1 x Propeller POWER-PROP 13x9
1 x Propeller POWER-PROP 13x9 Izda
1 x Motor A40-10 L V2 14-Pole Glider
1 x Motor A30-10 XL V4
1 x Planetary Gear 3,7:1incl. mountingadapter, pinion
1 x A50 Backmountset complete V3/V4
1 x Motor A50-10L Turnado V3 Glider
1 x AXI 4120/18 V2
1 x Motor B20-18 L + 4:1 gearbox
1 x A50 Backmountset complete
1 x AXI 5325/20 V2
1 x Axle for motor A20-S (3 uds)
1 x Motor Mega AC 16/15/07
1 x Motor Mega AC CAR 10 PRO
1 x Shaft for A60-L (140mm)
1 x Axle for motor A50-L
1 x Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt)
30,111.79EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies