Top » Catalog » Hardware » Transmitters/Receivers » Receivers » PowerBox CORE » POWER8240

109.00EUR

Receiver CORE PBR-26D 26ch
[POWER8240]

Features

26 Channel 2.4GHz Receiver
Two independent redundant receiver circuits
Extreme interference rejection
Ultra-long range
No servo outputs; intended as receiver unit for PowerBox or FBL systems
Option of iGyro SAT
Integral telemetry / servo bus (P²BUS)
High-performance real-time telemetry
Reception quality and airborne battery voltage available via telemetry as standard
Auxiliary output can be configured as serial interface (S.BUS or SRXL)
Parameters for all functions can be set from the transmitter

Technical Data

Operating voltage 4.0V - 9.0V
Supported RC systems CORE
Channels 26
Servo sockets 26
Servo signal resolution 4096 Steps
Integral gyro system optional with iGyro SAT
Dimensions 48 x 25 x 10 mm
Weight 10g
Temperature range -30°C to +85°C

under request

Reviews

Customers who bought this product also purchased

DLE 55-RA Muffler

under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Cable grommet Ø 3.2 mm (4 uds)
2 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Cable grommet Ø 4 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	100 mm rods set for direction control
2 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	45 mm rods set for direction control
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cockpit aluminium closing
2 x	80 mm rods set for direction control
1 x	100 mm rods + T patellas set for direction control
1 x	Clip fixing for wing (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
5 x	45 mm rods + T patellas set for direction control
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Allen wheel collar M3x3
1 x	Cable tie mounts 4.3 (4 uds)
3 x	Cable grommet Ø 6.4 mm (4 uds)
2 x	90 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	140 mm rods set for direction control
2 x	Clip mini fixing for wing (2 pcs)
1 x	Allen wheel collar M3x5
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x	140 mm rods + T patellas set for direction control
2 x	28x5 mm wires output (2 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
3 x	250 mm / 16 mm Airbrakes
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Motor A2212/13T
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
3 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Pushrod octagone 3/2
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	11 mm Rubber pads (14 pcs)
1 x	LOWER TOW HOOK
1 x	Tow hook for tug
1 x	Fixed launching hook
2 x	Adjustable launching hook
1 x	Triple rod con. 2mm Pushrod (2 pcs)
2 x	Lead with adhesive (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cockpit aluminium closing 5.4g
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
2 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Snap short M2 (10 uds)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Futaba Female 40 cm extension
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Premium servo extension 25cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 35 cm male (Futaba)
1 x	Circlick securite
1 x	Futaba male 40 cm extension
1 x	Extension 100 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Glases Moritz
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	DLE 55 RA pipe plug
1 x	DLE 30 complete electronic ignition
1 x	DLE 85 / DLE111 / DLE120 Prop Washer
1 x	10 mm portholes (10 pcs)
1 x	29,0 mm propeller (left propeller)
1 x	3.2 mm Prop Adapter M6
1 x	12x8 tree blades propeller
1 x	2.3 mm Adapter for 30 mm spinners
1 x	CILINDER FOR DLE 55RA
1 x	Ball bearing 6203 DLE
1 x	Gasket set DLE-30
2 x	DLE 111 Carb gasket (V1)
1 x	DLE 55 Ignition unit
1 x	CILINDER FOR DLE55, DLE111, DLE222
1 x	SBEC 30 D
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	XH male balance (3S) connector (2 pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	XH female balance (5S) connector (2 pcs)
2 x	XT-60 connector (female)
2 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	DLE 111 Old Crankshaft keyway
1 x	Escape DLE-60 Izda
1 x	Parachute PV6 for F3J
1 x	Set cintas unión paracaídas 145 cm
1 x	MAX pilot ARTF
2 x	Rescue 1,8m2 / BackPack
2 x	Aramid 50 daN 50 m
1 x	3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	14 mm portholes (10 pcs)
1 x	15x7 tree blades propeller LEFT
1 x	3 mm Leader (L 100 mm)
1 x	2,3 mm Prop Adapter M6
1 x	11x7 tree blades propeller
1 x	3,2 mm Prop Adapter M6
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Cockpit metalic closing
1 x	Astra (Top Model)
1 x	Bidule 55 V3 2460 mm
1 x	ARTIST 1.560 mm
1 x	65 mm mini servo cover
2 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
2 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	90x75 mm standart servo cover
1 x	18 mm wing servo holder
1 x	Avia spare blue cockpit (Top Model)
1 x	Astra wing Joinner (Top Model)
1 x	57 mm micro-mini servo cover
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	50x45 mm micro-mini servo cover
1 x	Bidule 111 3000 mm
1 x	Bidule 170 ARF 3.48 m
1 x	Albatros ,spare cockpit (Top Model)
1 x	Albatros red/white (Top Model)
1 x	BULLIT Wing 1095 mm
1 x	Angle measurer
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	90x60 mm standart servo cover
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Paramotor BackPack XXS 2
1 x	Needle bearing DLE55-RA
1 x	Bag connector 2 mm
2 x	XT-60 connector (male)
1 x	Piston ring for DLE-20 RA
1 x	Reed valve petal for DLE 170M
1 x	XT-90 connector (pair)
2 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Protector Connector Dean-T (1 pair)
1 x	Conector MR-60 (pareja)
1 x	Connectors MPX black female
1 x	DLE 111 pipe plug
1 x	Kit repair carburator DLE-85/111/120/222
1 x	GASKET SET FOR DLE40
2 x	MPX PCB "6 Pins", 5 pieces
2 x	Red 3m5 mm connector holder
1 x	Servo Connector Brackets (10 pcs)
2 x	MPX PCB "Gender-Changer (5 pcs)
1 x	Wing OXY 0,5 pulgadas2
1 x	Parachute BACKUP X100
2 x	Ballast 700gr OPALE
1 x	Para-RC Mix
1 x	LUCAS pilot ARTF
1 x	Trike XL motor set (motor+esc+prop)
1 x	Opale Rucksack
1 x	BABY glider drawings (Aero-naut)
1 x	Bocina 30 mm (1 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Axle for motor A20-S (3 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	ALBATROS 3.0 m (orange/white)
1 x	Escape DLE-60 Dcha
1 x	Hub DLE 30
1 x	MR30 connector female
1 x	Conector XT-30 (hembra)
1 x	Ball bearing 6003 DLE
1 x	Kit repair carburator DLE-170
1 x	Hub propeller DLE 111 V3/120
1 x	Connectors MPX black male
1 x	Piston ring for DLE-55/111/222
1 x	Motor support DLE 30 (1 pcs)
1 x	Piston ring for DLE-30
1 x	MR30 connector male
1 x	Gasket set DLE-55RA
1 x	Piston ring for DLE-20
2 x	MPX Support (2 pcs)
2 x	MPX PCB "4 Pins", 5 pieces
2 x	Soldering PCBs 8pin, 5 pieces
1 x	Gasket set DLE-20
1 x	Reed valve petal for DLE 111
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Reed valve petal for DLE 120
1 x	Muffler DLE 20
1 x	Red 4 mm connector holder
1 x	PROPELLER SCREW SET FOR DLE120 (6PCS)
1 x	MPX screwable clips (4 pcs)
1 x	Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61
1 x	Protector Connector MPX (1 pair)
1 x	MPX Support
1 x	Mounting frame MPX male connector
1 x	XT-30 connector (pair)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	MPX housing with flange (4 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	XT60 Connector with Holder Male 2pcs
1 x	Paramotor BackPack XXS (without accessories)
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Para-RC Trike "RC-Bullix"
1 x	Windsock Ozone L - 700 mm

11,566.23EUR