1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Bomba de combustible JM eléctrica
1 x Vela OXY 5.0 m2
1 x Conector FESTO M7 racor 6mm
2 x Bancada motor clase 48"
1 x TMM 2512-3S heli
1 x Autoarranque DLE 85/111/120 (motor incluido)
1 x Arrancador 12v (Max 180 and 30ccm)
1 x Barra pegamento caliente Rojo
1 x Anemometro Xplorer2
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Disipador motor tipo 300
2 x Base para servo
1 x Antena Cloverleaf 5.8 GHz Tx - Rx
1 x Batería Sanyo Eneloop AA 1,2 V 2000 mAh
1 x Disipador motor tipo 150
1 x Alicate para "Ball-Link"
1 x Alicate para hacer "Z"
1 x Bancada aluminio servo (2 uds)
1 x Reductora BB motor 400 eje 2,3mm (2,33:1)
1 x Reductora BB motor 280 eje 2,0mm (3,5:1)
1 x Reductora BB motor 300 eje 2,0mm (4,5:1)
2 x Reductora BB motor 600 eje 3,2mm (1,75:1)
1 x Reductora IPS 150 DX2BB-BXCS 7:1
1 x Juego de 4 palas
1 x Cuadricóptero F450/F550, Tren de aterrizaje
1 x Cuadricóptero Q-250 Kit Carbono
1 x Reductora PG para motores 400 (3,8:1)
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Reductora PG para motores Velkom (3,8:1)
1 x Reductora STD motor 400 eje 2,3mm (4,1:1)
2 x Reductora BB motor 300 eje 2,0mm (5,0:1)
1 x Reductora STD motor 280 eje 2,0mm (3,5:1)
1 x Reductora STD motor 280 eje 2,0mm (5,0:1)
3 x Reductora BB motor 480 eje 3,2mm (3,5:1)
1 x Reductora STD motor 280 eje 2,0mm (4,5:1)
2 x Reductora BB motor 280 eje 2,0mm (5,0:1)
2 x Servo HITEC HS-225 MG
2 x Servo HITEC D131 MW nano
2 x Set piñones servo HITEC HS-85
2 x Juego de 3 palas
1 x Tubo Tygon 6.35 x 3.18 mm 15 m
1 x VIPER JET G2 Esq. 4 Rojo/Blanco/Plata
2 x Set piñones servo HITEC HS-6965 carbonite
2 x Set piñones servo HITEC HS-645MG/5645MG/5685MH
3 x Servo HITEC HS-225 BB
1 x Set piñones servo HITEC HS205/225MG/5245MG/7245MH
1 x Set piñones servo HITEC HS-65 HB
2 x Servo HITEC HS-125 MG
1 x Servo TONEGAWA PS-050
1 x Set piñones servo HITEC HS-225
1 x Set piñones servo HITEC HS-311/322/325BB
2 x Programador HPP-21 PLUS HITEC digital servos PC y Campo de Vuelo
1 x Servo HITEC D85 MG
2 x Servo HITEC D954 TW
3 x Caja servo HS-225MG/225BB/5245MG
1 x Servo HITEC HS-5065 MG digital
1 x Servo HITEC D-955 TW Titanium
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC HS-5585MH
1 x Set piñones servo HITEC HS-81
1 x Servo HITEC D625 MW
1 x Programador HPP-25 PLUS HITEC digital servos Campo de Vuelo
1 x Pipa VIPER 1.7 + Deposito 1500 ml
1 x Set piñones servo HITEC HS-7950TH
2 x Servo HITEC D950 TW
1 x Patas + Ruedas con frenos eléctricos VIPER 1.7
1 x Cargador HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
2 x Set piñones servo HITEC HS-55
2 x Servo TONEGAWA SSPS105-12V 45º STD
3 x Servo HITEC D941 TW
1 x Morro OPTIMA 2.200 mm (Elec ó Planeador)
1 x Varilla acero roscada M2 - 1m
1 x Varilla carbono 8.0 mmx1000 mm
1 x Tuerca autoempotrable M2 (10 pcs)
1 x Vela OXY 0,5 pulgadas2
1 x Horn de mando carbono 20 mm
1 x Depósito de gasolina de 1000 cc completo
1 x Bayoneta de carbono cuadrada 5x5x220 mm
1 x Rueda KOVO SLH con rodamiento y núcleo metálico 170x54 mm
1 x Anclaje cabina en L "tipo F3A" (2 pcs)
1 x Piloto 1/12 "Cougar"
1 x Prolongador servo 20 cm HITEC/JR
1 x Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x Anemometro Xplorer4
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Rueda KOVO C SLH 120x60 mm
1 x Rueda 102x26 centro aluminio Ø6.0 mm
1 x KIRA 500-26 6,7:1
1 x Regulador JIVE 120+HV
1 x Adaptador SPEED 500/600
1 x Regulador KOSMIK 160 HV
1 x Tren retráctil
2 x Cabeza Rotora Completa (4 palas)
1 x Tren retráctil tripata (Alfa model)
1 x Reductora STD motor 400 eje 2,3mm (3,5:1)
1 x Reductora PG para motores SAGAMI 650 (3,33:1)
1 x Reductora BB motor 480 eje 3,2mm (3,0:1)
1 x Helice APC 10x6 Electric
1 x Helice APC 11x7 Glow/Gas
1 x Helice APC 11x8 Electric
1 x Helice APC 10x4.5 MR Electric Pusher
1 x Helice APC 10x7 Glow/Gas
1 x Reductora KPG25 5,2:1
1 x Adaptador SPEED 480 con eje corto
1 x Regulador KOSMIK 210 HV-I COOL
1 x Regulador JIVE 80+LV
1 x DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x Fuselaje autogiro RAINBOW
1 x Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x Flotadores de EPP de 460 mm
1 x Reductora BB motor 400 eje 2,3mm (3,0:1)
1 x Reductora STD motor 400 eje 2,3mm (3,0:1)
1 x Reductora BB motor 480 eje 3,2mm (4,1:1)
1 x Reductora BB motor 600 eje 3,2mm (2,33:1)
1 x Helice APC 10x4.5 MR
1 x Helice APC 10x10 Electric
1 x Helice APC 10x4.7 SF
1 x Helice APC 10x7 Electric
1 x Helice APC 11x4.7 SF
1 x Helice APC 10x6 Glow/Gas
1 x Helice APC 11x8.5 Electric
1 x Helice APC 10x4 Glow/Gas
1 x Helice APC 10x3,8 SF
1 x Helice APC 11x7 SF
1 x Servo HITEC HS-485 HB
1 x Cono carbono para F3A 95 mm
1 x Cono INO 70 mm Chrome (Imitacion metal)
1 x Cono INO 51 mm Chrome (Imitacion metal)
1 x Cono INOVA 63 mm blanco
1 x Cono INO de 57 mm (Imitacion carbono)
1 x Servo HITEC HS-311
1 x Servo HITEC D645 MW
1 x Servo HITEC D951 TW
1 x Cono F3A 82 mm eje 12 mm perforado 3BL
1 x Cono Aluminio hélice fija 45 mm diámetro / eje 4,0 mm
1 x Cono INO 89 mm Chrome (Imitacion metal)
1 x Cono aluminio autoventilado helice pleg. 34 mm dia./eje 3 mm
1 x Cono INO de 102 mm (Imitacion carbono)
1 x Servo HITEC HS-5085 MG Digi
1 x Set piñones servo HITEC HS-56 HB
1 x Servo HITEC HS-53
1 x Receptor MINIMA 6S HITEC
1 x Actuador lineal HLS12-100210-7.4v
1 x Set piñones servo HITEC HS-125MG/5125MG
11,942.54EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas