1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
2 x Electric spoiler 250 mm (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x SUS wire 3m (nylon coated)
1 x Cap closure 33/23.5mm (2 uds)
1 x Cockpit plastic closing
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Propeller APC 10x5 Electric
1 x Propeller APC 11x7 SF
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 11x10 Electric
1 x Propeller APC 13x8 Electric
1 x Propeller APC 13x6.5 Electric
2 x Propeller APC 11x4.7 SF
2 x Propeller APC 12x6 Electric Pusher
2 x Propeller APC 10x10 Electric
1 x Propeller APC 10x4.7
1 x Propeller APC 10x7 Electric
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 10x6 Electric
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
2 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 13x4 Electric
1 x Propeller APC 11x5.5 Electric Pusher
1 x Propeller APC 11x7 Electric
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 11x4.5 Electric Pusher
3 x Propeller APC 12x10 Electric
2 x Propeller APC 10x5.5 MR Electric multirrotor
2 x Propeller APC 12x8 Electric
2 x T-Connector 4.0 mm x 1000 mm
2 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x U Profile ABS 2,0x4,0x1000 mm
2 x L-Connector 1.5 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
2 x Profile ABS half cane 2.5x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
2 x Flat Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
2 x U Profile ABS 3,0x6,0x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x 2 mm female connector (2 pcs) with safety connector
1 x Tape GFK 50 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x ABS tube 5.0x4.0x1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x 140 mm rods set for direction control
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Frontal Adapter for AXI53xx
1 x Cabin latch Fox MDM1 4m (pair)
1 x Covered closure or fairings
1 x Actuator Electric 25 mm
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Festo 6mm Tubing Holder (10 uds)
1 x Quick hose connector 4-4 mm
1 x Body for landing gear Ø 3 mm
1 x Air pressure gauge
1 x HITEC Power Supply 30A. Max. 540w
1 x X-RAY Micro QR (Rudder)
2 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Aceite turbina JetsMunt 1 litro
1 x KIRA 600-16
2 x PYRO 700-45
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x Propeller APC 8x6 Electric
1 x DPSI Micro - RCS
1 x DPSI Micro MPS
1 x Propeller APC 14x8.5 Electric Pusher
1 x Propeller APC 15x10 Electric
1 x Propeller APC 5.25x4.75
1 x Propeller APC 9x4.7 SF
1 x Profile ABS half cane 4x1000 mm
1 x Propeller APC 6x4 Electric
1 x Propeller APC 4.75x4.75
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x 70x23 Ø3.5 mm aluminium core wheel
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x 80x40 mm hard foam KOVO wheel
1 x 32x9 mm foam standar KOVO wheel (2 pcs)
1 x Glases Moritz
1 x Glases Stratus
1 x 
1 x Debonder CA 20g
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Cable coupler M3 (10 uds)
1 x 10 mm aluminium spinner (Kavan)
1 x 25 mm Sandpaper file
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x 60 mm aluminium spinner (Kavan)
1 x 45 mm aluminium spinner (Kavan)
1 x Birch plywood plate 600x300x1.5 mm
1 x Ciano KAVAN Thin 20g
1 x BETA 1400 ARF Red
1 x Blade holder lower
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x Servo Fork
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Nut M1,6
1 x Bearing 3x6x2,5
1 x X-RAY Micro QR (Elevator)
1 x DUPLEX 2.4EX Central Box 320
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Cable tie mounts 4.3 (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Canopy Latch
1 x 45 mm rods set for direction control
1 x 8 mm Adapter for AXI53xx
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x AXI Cooler 41xx
1 x Universal Prop Saver
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x DPSI magnetic switch actuator (PCB)
1 x KIRA 400-27
1 x Propeller APC 15x7 Electric
1 x Propeller APC 20x8 Electric
1 x Propeller APC 21x12 WE Electric
5,845.69EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies