Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Controlador tren/frenos ER-150 V2
55.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Pasacable de goma Ø 6.4 mm (4 uds)
1 x	Mini Clips para fijar Ala (2 pcs)
1 x	Pasacable de goma Ø 5 mm (4 uds)
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Conjunto bieleta 45 mm y rótulas T. para dirección
1 x	Taco goma 11 mm (14 pcs)
1 x	Prisionero allen M4x6
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Clips para fijar Ala (2 pcs)
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Cierre cabina
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Conjunto bieleta 90 mm y rótulas T. para dirección
1 x	Cierre cabina V1 M3 Rojo (2 pcs)
1 x	Prisionero aluminio 5 mm Ø (4 uds)
1 x	Frenos Cuchillo 250 mm / 16 mm
1 x	Prisionero allen M3x5
1 x	Prisionero allen M3x3
1 x	Conjunto bieleta 45 mm para dirección
1 x	Conjunto bieleta 100 mm para dirección
1 x	Cierre para cabinas aluminio
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Pasacable de goma 9.5 mm (4 uds)
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
2 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Cinta SURFACE 21mm x 5m
1 x	Cinta fibra vidrio 38 mm
2 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	Sistema cierre 450 mm con abrazadera (2 pcs)
3 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Sistema cierre 320 mm largo (5 pcs)
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Abrazadera con letrero (20 pcs)
2 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Cinta fibra vidrio 25 mm
1 x	Cinta fibra vidrio 50 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Paracaídas de seguridad 1,8 m2
2 x	Paramotor BackPack XXS 2
1 x	Vela OXY 5.0 m2
2 x	Piloto LUCAS ARTF
1 x	Listón de TILO 2,0x2,0x1000 mm
1 x	Listón de PINO 5,0x5,0x1000 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Listón de PINO 3,0x10,0x1000 mm
1 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Listón de BALSA 3,0x5,0x1000 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
1 x	Rótula M3
1 x	Rótula corta M2 con bola/tornillo (6 uds)
1 x	Rótula con rodamiento M2,5 22x5,5
2 x	Rótula con rodamiento M3 22x5,5
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
2 x	Rótula M3 RPA's-UAV's
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
2 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
2 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula corta M3 con bola/tornillo (6 uds)
1 x	Rótula M3
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Bascula precisión 0.1- 600 g
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
2 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Hélice POWER-PROP 7x7
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Paracaidas rescate "RC-Evo-Cross"
1 x	Vela OXY 0,5 pulgadas2
1 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Plancha de balsa 4,0x100x1000 mm
1 x	Plancha de balsa 6,0x100x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Piloto "Anthony" (Slimline)
1 x	Piloto 1/10 "Jack"
1 x	Plancha de balsa 1,0x100x1000 mm
2 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Soporte ECU Xicoy X-45
1 x	Soporte conector XT-60 (2 pcs)
1 x	Soporte Filtro FESTO
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Clips scape Ø25 mm
1 x	KIRA 480-26 5,2:1
1 x	KIRA 480-31 5,2:1
1 x	Reductora KPG27 5,2:1
1 x	Adaptador FUN 400/480
1 x	Regulador KOSMIK 210 HV-I COOL
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte bomba/flitro Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Helice XOAR 15x8 Electrica
1 x	Helice XOAR 22x10 Electrica
1 x	Helice XOAR 16x7 Electrica
1 x	Helice XOAR 12x6 Electrica
1 x	Helice XOAR 20x10 Electrica
1 x	Cilindro ZG-20
1 x	KIRA 600-17
1 x	Arillo ZG-20
1 x	Brazo ext. carburador Tufnol d=4.7mm
1 x	KIRA 500-26 6,7:1
1 x	Bancada motor ZG38/38S/38SC, Long: 36 mm
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Bancada motor ZG45/62, Long: 54 mm
1 x	Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x	KIRA 600-16
1 x	Captador DA50/100/150
1 x	Capuchón BOSCH para bujía ZG 26SC/SCM, 231SLH, G230RC
1 x	KIRA 400-27
1 x	Regulador KOSMIK 160+ HV COOL
1 x	Eje para motor Hacker A60-XS-V2 (112,5 mm)
1 x	Eje para motor Hacker A60 L (140 mm)
1 x	Arillo pistón para motor DA-50R y DA-100
1 x	Adaptador para motor A50-V3
1 x	Cable adapter iCharger
1 x	Adaptador TP/TopFuel - JST-EH 4/5S
1 x	Backmountset complete A40
1 x	FesEx-Uni6 System
1 x	Bancada motor HACKER A60 aluminio
1 x	FesEx-Uni8 System
1 x	A60-6XS V4 28-Pole
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Sukhoi 29S 2,6 m Amarillo/Negro (SebART)
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Plancha de balsa 2,5x100x1000 mm
1 x	Bateria LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Brazo de servo 50 mm con rodamiento (2 pcs)
1 x	Brazo servo FUTABA long (8 pcs) DUBRO
1 x	Brazo de servo 40 mm con rodamiento (2 pcs)
1 x	Servo Robbe FS 525 BB MG HV
1 x	Servo TONEGAWA SSPS105-12V 45º STD
1 x	Servo TONEGAWA PS-050
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Brazo servo aluminio 15-10 mm HITEC
1 x	Brazo servo aluminio 15-10 mm Futaba/MKS/Savox
2 x	Hoja sierra 65mm Diamond para OZI/E
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)

9,421.86EUR