1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Rescue 1,8m2 / BackPack
1 x LUCAS pilot ARTF
1 x Wing OXY 5,0 m2
1 x Parachute P4
1 x Aramid 50 daN 50 m
2 x Opale Rucksack
1 x Parachute BACKUP X100
1 x Paramotor BackPack XXS 2
1 x Paramotor Trike XL
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Para-RC Trike "RC-Bullix"
1 x Windsock Ozone L -1200 mm
1 x Windsock Ozone L - 700 mm
1 x MAX pilot ARTF
1 x Set cintas unión paracaídas 145 cm
1 x Motor DLE 200cc Std
1 x 800TVL CMOS camera for FPV
1 x Cabin latch Fox MDM1 4m (pair)
1 x Conector BEC female (10 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Pilot "Dick" Legends Series (Slimline)
1 x 1/6 Pilot "John"
1 x 1/12 Pilot "Langley"
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Conector BEC male (10 pcs)
1 x EC-Cutter
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Cable grommet Ø 3.2 mm (4 uds)
2 x 1/12 Pilot "Cougar"
1 x 30 cm MULTIPLEX female connector
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Ball Link Plier
1 x 
1 x Digital precision scale up to 2000 g
1 x Cable grommet 9.5 mm (4 uds)
1 x Connectors banna oro 3,5 mm (M/F)
1 x 1/6 Pilot "Tony"
1 x 2 mm female connector (2 pcs) with safety connector
1 x 1/7 Pilot "Japanese"
1 x 28x5 mm wires output (2 pcs)
2 x Extra Hard Titanium Herxagon Screwdrivers
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Connectors banna oro 0,8 mm (M/F)
1 x Conector JAPAN G2 Set 5 pares
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Cap closure 33/23.5mm (2 uds)
2 x Parachute PV6 for F3J
1 x Allen wheel collar M4x4
2 x 100g Flux Paste for Silver Solder
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x 25 mm Sandpaper file
1 x Crimping tool
1 x 90 mm rods + T patellas set for direction control
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Conector FUTABA Servo female (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Concave-Convex sandpaper file 13 mm
1 x Conector MT-60 (pair)
1 x Pilot "Anthony" (Slimline)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Landing gear axle Ø 8 mm (2 uds)
2 x Landing gear axle Ø 4 mm (2 uds)
1 x Landing gear axle Ø 6 mm (2 uds)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Cockpit aluminium closing 5.4g
1 x MPX PCB "4 Pins", 5 pieces
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x Avanti XS Jet , Tricolore Canopy
1 x Avanti XS Jet , Tank for Keroseno (SebArt)
1 x Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x Spinner propeller pleg. 40 mm / 3,0 mm
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Spinner propeller pleg. 30mm axle 3,0 mm
1 x Spinner propeller pleg. 30 mm / 2,3 mm
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Connectors MPX female
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x 2,0x50 mm allen screwdriver
1 x Mounting frame MPX male connector
1 x 1/10 Pilot "Jimmy"
1 x Pilot "Duke" Legends Series (Slimline)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Connectors banna oro 6,0 mm (M/F)
1 x MPX PCB "6 Pins", 5 pieces
1 x PIN Connector female (100 pcs)
1 x Ball Link Plier
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Control for forward wheel (MINI)
1 x MPX Support
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Protector Connector MPX (1 pair)
1 x Piloto Jet "Green" 1/6 Scale
1 x Dean-T Plug Mold
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x 1/12 Pilot "Tom"
1 x Pilot JAN 1/4 Saiplanes
1 x Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Spinner propeller pleg. 30 mm / 3,2 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Landing gear axle 4x21 4 mm (2 uds)
8,998.94EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies