1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
2 x Lock washer 2.7 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
2 x Quicklock washer 1 mm (10 pcs)
2 x Spring lock washer 2.6 mm (20 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
2 x Quicklock washer 1.5 mm (10 pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Solvent Plasti Dip 1000 ml
2 x Spray YELLOW Inca Lexan 150ml
1 x 
1 x Hobbylite Filler, Balsa colour
2 x Universal Colour Paste deep black 50 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x PARTALL® Hi-Temp Wax, 340 g
1 x 20 g tin paste
1 x Painting GHT Lexan Black 150 ml
1 x 500 ml sealer (DOPE)
2 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Nitroverdu 500 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Spannlack 1000 ml
1 x 1000 ml sealer (DOPE)
1 x Spray Graphit 33
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Ball Link Plier
1 x Marker ties (20 pcs)
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x Jodel D.9 BeBe 2.400 mm Kit
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x CA Glue fast 20g
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x Pan head screw M2x16 PH
2 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Screw M2x8 (10 pcs)
1 x Threaded insert M6 (10 pcs)
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Gear set HITEC HS-7950TH
1 x Servo Digital HITEC HS-5065 MG
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Screws set for Hitec MG arms servo
1 x Gear carbonite set HITEC HS-6965
1 x Servo SAVOX SW-1250 MG digi
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Screw M4x12 (10 pcs)
1 x Servo FUTABA BLS173 SV
1 x Nut for mounting M3 (10 pcs)
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Nut for mounting M2,5 (4 pcs)
1 x Socket Head Screw M2x8
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Servo M2x5/16 screw (4 pcs)
1 x Nylon Screw M4x20
1 x Servo FUTABA SBL 471 SV
1 x Screw M3x30 (10 pcs)
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Futaba 25 mm servo arm with M3 ball link
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
2 x Futaba 54 mm servo arm with ball link
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x Horizontal servo holder
1 x Nut for mounting M3 (4 pcs)
1 x Screw M4x30 (10 pcs)
2 x Servo FUTABA BLS172 SV
1 x Servo SAVOX SV-0236 MG HV
1 x Horizontal mounting servo holder
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Socket Head Screw M2x12
2 x Hitec 38 mm servo arm with ball link
1 x Servo SAVOX SV-1261 MG
1 x Futaba 3010 - Gear Set
1 x 54 mm Futaba servo arm tandem with ball link
1 x Gear set HITEC HS-225
1 x Screw M2.5x8 (10 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Savox Brushless Servo SC-1267 SG
1 x Screw M3x5 (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Hitec 52 mm servo arm
1 x Futaba 46 mm servo arm with ball link
1 x Servo HITEC D951 TW
1 x Servo SAVOX SA-128S SG
1 x Servo FUTABA S 3071 HV S-Bus
1 x Gear set HITEC HS-125MG/5125MG
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Servo HITEC D-955 TW Titanium
2 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Futaba 30 mm servo arm with M3 ball link
1 x Servo HITEC D131 MW nano
1 x Gear set HITEC HS-311/322/325BB
1 x Screw M2.5x20 (10 pcs)
1 x Servo HITEC D950 TW
1 x Servo FUTABA S 3072 HV S-Bus
1 x Servo HITEC HS-225 BB
1 x Servo SAVOX SV-1270 TG
1 x Servo FUTABA HPS-A700 Digital S-Bus
1 x Gear set HITEC HS-55
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Pitts Muffler kit for CAP 21
1 x Antenna holder bracket double
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x Crystal Universal RX 35.120 Ch 72
1 x Spring Clip Ø25 mm
1 x Hardener Aero EPH 161 (500 g)
1 x Glases Stratus
1 x EDGE 540-A 91" (2310 mm)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x Glases Flitemaster
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x Glases Moritz
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x Bidule 111 3000 mm
1 x Bidule 170 ARF 3.48 m
1 x Bidule 55 2460 mm Cabina
1 x Epoxy 40 min (Resin). 5 Kg
1 x Epoxy 5 min. 500 g (Resin)
1 x Epoxy 40 min (Hardener). 1 Kg
1 x Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Flat washer 4.3 mm (20 pcs)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x Blind nut M3 (4 pcs)
1 x Servo HITEC HS-785 HB
1 x Futaba 30 mm servo rounded arm
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x SAVOX SH 1290 MG servo digi
1 x Lock washer 2.2 mm (20 pcs)
1 x VBar Control RX-Satellite
1 x Crystal Universal TX 35.140 Ch 74
1 x Micro Crystal RX 35.010 Ch 61
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x Propeller Pleg CAM-Prop 8x6
1 x DC-3 Douglas (DAKOTA) 1800 mm Electric LG
1 x Servo HS-7980TH digi high voltage ultra torque
1 x Vertical mounting servo holder
1 x Hitec 25 mm servo arm with ball link
1 x Futaba 38 mm servo arm
1 x Servo HITEC HS-82 MG
1 x Servo HITEC HS-7975 TG
1 x Servo HS-5765MH High Voltage
1 x Gear set HITEC HS-56 HB
1 x HITEC 20 mm servo arm with ball link
1 x Servo HITEC HS-7115 TH
1 x Blind nut M5 (10 pcs)
1 x Lock nut aluminium M2.5 (4 pcs)
1 x Servo SAVOX SA-1256 TG
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x 12 mm floating pad (49 pcs)
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Blind nut M5 (4 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x 3,9 mm ZG20-ZG38 servo arm
1 x SunCover 50 Class (SebART)
1 x Avanti S, Cockpit sunCover (SebART)
21,871.96EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies