Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Silicone 0,35 qmm servos wire Futaba (100 m) temporarily out of stock	Connectors MPX female temporarily out of stock	Fuel Station 20L temporarily out of stock
Epoxy 40 min. 4kg (Hardener) temporarily out of stock	Silicone red 6,0 qmm wire (25 m) temporarily out of stock	Connectors MPX 8 pins (green) 1 pair (male-female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	30 cm DEANS female connector
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
4 x	Extension silicon 30 cm male (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
3 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Gold antispark 4 mm plug
1 x	2 mm female connector (2 pcs) with safety connector
2 x	XH female balance (3S) connector (2 pcs)
1 x	Premium servo extension 25cm
1 x	Conector BEC female (10 pcs)
1 x	Extension 90 cm (Futaba)
2 x	Connectors banna oro 3,5 mm (M/F)
2 x	Extension silicon 30 cm male (Graupner)
1 x	Banna gold connector 2,5 mm (M/F)
2 x	Extension silicon 10 cm (Graupner)
1 x	Circlick securite
1 x	XH female balance (2S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Connectors DEANS (T)
2 x	Extension 15 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension 7.5 cm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Extension silicon 30 cm female (Futaba)
2 x	Extension 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
2 x	Connectors DEANS 4 pins (1 pair)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Prolongador S-Bus JR/JR 10cm
3 x	Extension PVC 150 cm (Graupner)
1 x	Premium servo extension 100cm
1 x	Optotronix Aurora Plug
1 x	Premium servo extension 50cm
3 x	Extension silicon 35 cm male (Futaba)
2 x	Extension silicon 30 cm female (Graupner)
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
3 x	Extension 100 cm (Futaba)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	XH male balance (2S) connector (2 pcs)
2 x	Connectors banna oro 0,8 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
2 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 6.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Stickers-digit for marking
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	Towing hook <3m
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Fixed launching hook
3 x	Profile ABS Square 2 x 1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
3 x	White smoke bombs AX-60 (5 pcs)
1 x	Smoke set "M"
2 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Parachute expulsion foam
1 x	Black smoke bombs AX-60 (5 pcs)
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Smoke set "Glider"
1 x	Red smoke canister 65 g
3 x	U Profile ABS 2,0x4,0x1000 mm
2 x	White smoke canister 100 g
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	"S" set for boats
2 x	3l Smoke oil
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Parachutist
2 x	Ventral support for AX-18/AX-60
2 x	L-Connector 1.5 mm x 1000 mm
3 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Yellow smoke canister 140 g
2 x	Profile ABS half cane 3x1000 mm
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	1/6 Pilot "Tony"
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Dust collector for mould cleaning
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 25 cm (Graupner)
2 x	Extension silicon 75 cm (Futaba)
2 x	MPX Support (2 pcs)
1 x	Extension silicon 75 cm (Graupner)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	Bag connector 2 mm
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Soporte grifo FESTO (2 pcs)
2 x	Support Flush MPX Conector (6 pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Tube support Ø 6mm (10 pcs)
1 x	ABS tube 8.0x6.0x1000 mm
3 x	Connector CAN 15
2 x	Conector JR Servo female (50 pcs)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Fiberglass tube 6/4x1000mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Futaba Female 40 cm extension
2 x	Motor A2212/13T
1 x	Extension silicon 10 cm (Futaba)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	Extension silicon 100 cm (Graupner)
2 x	XH male balance (4S) connector (2 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	ABS angle 3,0x3,0x1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	B4-0 rocket charges (6 pcs)
2 x	Profile ABS Square 1 x 1000 mm
1 x	Rubber profile 10-2 mm 2M
2 x	Profile ABS half cane 4x1000 mm
1 x	"M" set
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	6,4x1000 mm 2:1 green termoretract tube
2 x	ABS I Strip 20x10x1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Round Rod 2,0x1000 mm
2 x	EasyFLY Addon
1 x	PIX Hawk with accesories
1 x	Remote electric ignition system
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Yellow smoke canister 100 g
1 x	Green smoke canister 140 g
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	Profile ABS half cane 2.5x1000 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Initior Transmitter FTX2 Wireless
1 x	Rubber profile 6-2 mm 2M
1 x	ABS angle 4,0x4,0x1000 mm
1 x	White smoke canister 140 g
2 x	PCARD Wireless System
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Green smoke canister 65 g
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Electric rocket starters (6 pcs)
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Legs + electric brakes for Viper Jet 90
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	Bearing block for noseleg landing gear
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Foreman, scale 1:32
1 x	Propeller hub spacer 8/5.5
1 x	12 mm portholes (10 pcs)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Covered closure or fairings
1 x	Premium servo extension 75cm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Extension silicon 25 cm (Futaba)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Futaba male 40 cm extension
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	SUS wire 3m (nylon coated)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	14 mm portholes (10 pcs)
1 x	29,0 mm propeller (rigth propeller)
2 x	10 mm Prop Adapter M12
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	3 mm Leader (L 100 mm)
1 x	3.2 mm Prop Adapter M8
2 x	31,0 mm propeller (rigth propeller)
2 x	10x7 tree blades propeller
1 x	2,3 mm Prop Adapter M6
1 x	14 mm Portholes for screws (10 pcs)
1 x	11x7 tree blades propeller
1 x	2.3 mm Adapter for 30 mm spinners
2 x	3.17 mm Prop Adapter CN-Spinner
1 x	16x10 tree blades propeller Master Airscrew
1 x	3,2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	15x7 tree blades propeller
2 x	12x8 tree blades propeller
3 x	12 mm mast holder
1 x	290 mm M4/4 mm Prop shaft
1 x	250 mm / 16 mm Airbrakes
1 x	15x7 tree blades propeller LEFT
1 x	12x6 tree blades propeller
1 x	MPX Support
1 x	Protector Connector MPX (1 pair)
1 x	Red 4 mm connector holder
1 x	MPX housing with flange (4 pcs)
2 x	Soporte carbono MR30 (2 pcs)
1 x	MPX screwable clips (5 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	Servo Connector Brackets (10 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	XT-60 connector (female)
1 x	Mounting frame MPX male connector
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Extension MPX-MPX 20 cm
1 x	Red 3m5 mm connector holder
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	MPX PCB "4 Pins", 5 pieces
1 x	MPX screwable clips (4 pcs)
1 x	XT60 Connector with Holder Male 2pcs
1 x	XT-60 connector (male)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	PIN Connector female (100 pcs)
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Autogyro Cierva C30 Spain
1 x	Bearing housing
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	Round Rod 4,0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Head lower part New
1 x	Soporte filtro FESTO (4 pcs)
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Aro pasacable Ø25 mm (4 pcs)
2 x	XH female balance (9S) connector (2 pcs)
1 x	Support Pitot JETI
1 x	Complet landing gear
1 x	Glases Stratus
1 x	Cierva C30 simulated motor
1 x	LA500 housing-upper cyclic
1 x	Ball joint long
1 x	ABS tube 8.0x7.0x1000 mm
1 x	LA500 nose
1 x	XH female balance (8S) connector (2 pcs)
1 x	Cierva C30 Elevator
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	LA500 freewheel bearing
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	XH male balance (3S) connector (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Blue smoke canister 140 g
1 x	Extension lead 15 cm Multiplex
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	LightBox SR
1 x	ED Position Lights wireless (Set of 3)
1 x	LED blink wire flashing (blue - 2pcs)
1 x	2 mm male connector (2 pcs) with safety connector
2 x	Connectors banna oro 8,0 mm (M/F)
1 x	Initior Receiver FRX2 Wireless
1 x	AX-60 starters (5 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,25x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Motor Scorpion HKIII 4035-560 Kv
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Tren de cola carbono 50-70cc
1 x	Ciano KAVAN Medium 20g
1 x	Propeller CFK 17x18
1 x	Propeller CFK 15x7
1 x	36 mm white plastic spinner for fixed propeller
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	45 mm black plastic spinner for fixed propeller
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	LED blink wire flashing (white - 2pcs)
1 x	LED blink wire flashing (red - 2pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Propeller CFK 14x7
1 x	Propeller CFK 20x13 "white"
1 x	45 mm white plastic spinner for folding propeller
1 x	Ball Bearing Oil 25 ml
1 x	Engine mounts for .09 - .19 engine
1 x	Propeller CFK 20x13
1 x	KAVAN CA Activator 150ml
1 x	Conector BEC male (10 pcs)
1 x	Connectors MPX female
1 x	Connectors MPX male (PIN double)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)

6,431.32EUR