85.00EUR

Crawler GRE-24 RTR 1:24 Arena
[KAV06GRE24S]


Fully assembled 1/24th scale RC crawler model, including electronics and battery pack. Compact size for small space off-road driving.
Enter the scale crawler world with our brand new models GRE-18
Smaller size, same fun.
The new range of 1/24th scale RC crawlers brings you the fun of full-scale models in even smaller package. Because a smaller scale means larger environment with all of the obstacles. You no longer need a forrest and mountains for an expedition full of adventure - a city park, garden, living room, or just couple of rocks are now enough for hours of fun as well!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-24 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, roof rack, snorkel, side mirrors, rear light covers and a functional spare wheel.
When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming difficult obstacles. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need.
On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud or puddles - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB battery charger, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.
Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like front grille, side mirrors, roof rack and more
Adjustable bumpers and body mounts
Functional spare wheel
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
Powerful brushed motor
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 3.7V 1S Li-Po battery pack, which can last more than 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts
KAV06.240036 GRE Performance Upgrade Package
KAV06.240071 GRE Aluminum Upgrade Shocks Set
KAV06.240072 GRE Steel U-Joint Cross Ball Set
KAV06.240073 GRE24 Steel Main Drive Shaft Set
KAV06.240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 3.7V 1S Li-Po
Charger: USB 600mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Instruction manual
Required for operation
4xAAA batteries for transmitter
Wheelbase [mm] 121
Width [mm] 104
Length [mm] 215
Height [mm] 106
Ground clearance [mm] 28
Wheel diameter [''] 1.8
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 1
Chassis type Off-road,Crawler,Hobby


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x BALSA triangular 10x10x1000 mm
2 x Balsa panel 1.5x100x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
2 x BALSA triangular 15x15x1000 mm
2 x A/C quality beech plywood 600x300x0.6 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x Balsa panel 2.5x100x1000 mm
2 x Balsa panel 4.0x100x1000 mm
2 x Balsa panel 5.0x100x1000 mm
2 x Balsa panel 6.0x100x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
2 x Balsa panel 10x100x1000 mm
2 x BALSA trip 2.0x2.0x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Beech dowels 3.0 x 1000 mm
3 x Balsa panel 3.0x100x1000 mm
3 x Balsa panel 1.0x100x1000 mm
2 x Straightened rod Ø 6.0 mm x 1000 mm
2 x Straightened threaded rod M3 - 1m
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
4 x BALSA triangular 6x6x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Balsa panel 8.0x100x1000 mm
2 x A/C quality beech plywood 1520x750x4.0 mm
2 x A/C quality beech plywood 1520x750x3.0 mm
2 x A/C quality beech plywood 600x300x6.0 mm
3 x 800TVL CMOS camera for FPV
1 x Birch plywood plate 600x300x2.0 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
2 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Propeller POWER-PROP 14x9
1 x Propeller POWER-PROP 14x9 Izda
1 x Extension silicon 30 cm male (Graupner)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Futaba male 40 cm extension
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Extension 7.5 cm
2 x Cabel "Y" 15 cm
1 x Prolongador S-Bus JR/JR 10cm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Futaba Female 40 cm extension
1 x Extension lead 15 cm Multiplex
2 x BALSA trip 6.0x6.0x1000 mm
1 x Circlick securite
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x Extension silicon 35 cm male (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x OBECHI sheet 2.0x3.0x1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Premium servo extension 75cm
2 x BALSA trip 8.0x8.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x Prolongador S-Bus JR/JR 20cm
2 x Liston HAYA 8 x 8 x 1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
1 x Premium servo extension 25cm
1 x Extension 15 cm (Futaba)
3 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Premium servo extension 50cm
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension silicon 30 cm female (Graupner)
2 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Cabel "Y" 30 cm (Futaba)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Glases Nimbus
1 x Spray EC Red 400ml
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Z Bender - S Type Tool
1 x Short ball link M3 (6 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x A/C quality beech plywood 600x300x0.8 mm
2 x Crystal Universal RX 35.090 Ch 69
2 x Crystal TX 35.150 Ch 75
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Crystal RX 35.120 Ch 72
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
2 x BALSA trip 10x10x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
2 x A/C quality beech plywood 600x300x0.8 mm
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Fiberglass plate 620x540x0,3 mm
2 x BALSA trip 2.0x10.0x1000 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x 200 mm extensión servo HITEC/JR
1 x Glass fabric 425 g/m² aero,10x1m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Sheet Depron Aero 1250x800x3 mm
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x MR30 connector male
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Glass fibre sleeve Ø 20 mm X 20m
2 x Liston HAYA 10 x 10 x 1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x SD HC 8 GB
1 x Small flex hinge (12 uds)
1 x 150 Newtons FEMA absorber
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x 100 Newtons FEMA absorber
1 x Small pinned hinge (6 uds)
1 x 200 Newtons FEMA absorber
1 x Motor SAITO FG-61 TS
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x 45 mm aluminium spinner (Kavan)
1 x Dummy motor GPW Wasp Scale 1/4
1 x Axle for AXI 28269/xx motors
1 x Conector MT-60 (pair)
1 x BETA 1400 RTF Red
1 x 
1 x Crawler GRE-24 RTR 1:24 Arena
1 x Concave-Convex sandpaper file 13 mm
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Motor mount VANQUIST 48" F3A
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x Starter EM Gear Power 80
1 x Refueling Cap V3 Black
1 x Adaptadores carga 6s JST-XH
1 x OS 40-FG 4T Motor
1 x Extension 30 cm (Futaba)
1 x Beech dowels 10 mm x 1000 mm
1 x Connectors MPX male
1 x LED wire (white - 2pcs)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Protector Connector MPX (1 pair)
1 x Reflector 18 mm (2 pcs)
1 x MPX Support (2 pcs)
1 x Gold antispark 4 mm plug
1 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x MPX PCB "6 Pins", 5 pieces
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x Cooler motor type 400
2 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Crystal Universal RX 35.040 Ch 64
1 x Crystal Universal RX 35.030 Ch 63
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Propeller 9x7 SlowFlyer
1 x Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x Reductora IPS dual-motor 10,7:1 with spinner
1 x Retract undercarriage
1 x Propeller 3x2
1 x Propeller 9x4,7 SlowFlyer
1 x Propeller 11x4,7 SlowFlyer
1 x Foam wheel Ø 351 mm (2 pcs)
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Propeller 8x4 Electric
1 x Cooler motor type 280
1 x GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Propeller 10x4,7 SlowFlyer
1 x Crystal TX 35.010 Ch 61
1 x Crystal TX 35.050 Ch 65
1 x Crystal Universal RX 35.150 Ch 75
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Crystal Universal RX 35.020 Ch 62
1 x Crystal Universal RX 35.070 Ch 67
1 x Crystal Universal RX 35.050 Ch 65
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Spinner propeller pleg. 42 mm / 6,0 mm
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Esc MasterBasic 90 Opto
1 x Esc MasterSPIN 66 Pro
1 x Esc MasterSPIN 70 Pro OPTO
1 x Esc MasterBasic 55SB
1 x 120x60 mm SLH KOVO wheel
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Pin hinge 34x16 mm (10 uds)
1 x Axle for AXI 2808/xx motors
1 x Axle for AXI 4130 V2 motors
1 x Ciano KAVAN Thick 20g
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x 10 mm aluminium spinner (Kavan)
1 x Debonder CA 20g
1 x Combustible Glow "KAVAN" air/heli 15% nitro
2 x Blade holder metal LAMA
1 x Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Extension 90 cm (Futaba)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Engine mounts for .09 - .19 engine
1 x Spinner 60 mm White (Kavan)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Conector JR Servo male (10 pcs)
1 x DPSI RV Mini 5 Magic
1 x Emisora HORUS X10S Carbone Fiber
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Futaba Multi-Switch 16 DECODER
1 x RX TARANIS V8FR-II HV 2.4 GHz
1 x Emcotec SPS Magnetic Switch Actuator
1 x DUPLEX 2,4GHz MRPM EX
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Conector MR-60 (pareja)
1 x 2 mm female connector (2 pcs) with safety connector
1 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Futaba Multi-Switch-Prop 12+2 MODUL
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Vacuum bag, 1200 mm x 50 m
1 x 20 mm gas motor standoff
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x 6 mm Quick clamp_S (10 pcs)
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x Potenciometro micro
1 x Motor Set CHALLENGER Indoor
1 x Arnes cruzado Confort de Luxe PROFI
1 x CHALLENGER Indoor
1 x PROFI TX fastening rings
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Threaded coupler M2,5 (10 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
10,249.85EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies