Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Propeller MENZ-S 18x8 few units	Straightened rod Ø 1.0 mm x 1000 mm few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Servo HITEC D950 TW
1 x	Servo MKS HV6120H
1 x	Servo HITEC D85 MG
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Glases Nimbus "Black"
1 x	Balsa panel 3.0x100x1000 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Servo MKS HBL380
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Servo DITEX EL0510M
1 x	Servo HITEC D951 TW
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Gear set HITEC HS-56 HB
1 x	Servo MKS HV69
1 x	Cabel "Y" 30 cm (graupner)
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	58 mm micro servo cover
1 x	Servo ROBBE FS-31 Pico Servo
1 x	SE Ring 400 mm (2 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Straightened threaded rod M3 - 1m
1 x
1 x	Servo inverter
1 x	Jeti Black cap
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Extra long horn 60x30
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x	Servo KST X08 Plus 9g HV servo
1 x	PS-050 TONEGAWA Servo
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Professional Servo tester
1 x	Support Flush MPX Conector (6 pcs)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Digital scale up to 40 kg
1 x	ALU double servo arm 3 mm shaft
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Servo TOPMODEL DS1413 T
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	10-15mm Servo Arm HITEC
1 x	Cable control set
1 x	6 mm red aluminium threaded horn with patella
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Servo inverter
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	100g Flux Paste for Silver Solder
1 x	Adjustable brass horn threaded M3
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	SE Ring 330 mm (4 pcs)
1 x	6 mm M3 variable horn
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Horn 6/35 with M3 Bearing
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Servo Robbe FS 525 BB MG HV
1 x	10-15mm Servo Arm
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Support pump Xicoy X45
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Cable set Premium™ MAXI "one4two"
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Digital precision scale up to 2000 g
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	6 mm M3 variable inclined horn
1 x	Servo TOPMODEL S7520 MG
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	2,0x50 mm allen screwdriver
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Cable Cargador FUTABA
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x	Dremel PERMAGRIT thin lime
1 x	25 mm Sandpaper file
1 x	Horn mando small (2 pcs)
1 x	Ball Link Plier
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	300x4 mm M4 shaft ship
1 x	29,0 mm propeller (left propeller)
1 x	15x7 tree blades propeller
1 x	29,0 mm propeller (rigth propeller)
1 x	25 mm fenders (10 pcs)
2 x	SCHARNHORST Battleship 1:200
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	3.2 mm Prop Adapter M8
1 x	2 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	12 mm portholes (10 pcs)
1 x	2,3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	Cabel "Y" 15 cm
1 x	Interface Realflight Simulator
1 x	Interface Jack Adapter IKARUS
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 35 cm male (Futaba)
1 x	200 mm extensión servo HITEC/JR
1 x	Extension 30 cm (Futaba)
1 x	Servo MKS HBL550
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 10 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Servo MKS HV6130
1 x	Futaba Female 40 cm extension
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	57 mm micro-mini servo cover
1 x	18 mm wing servo holder
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	50x45 mm micro-mini servo cover
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Spinner propeller pleg. 42 mm / 4,0 mm
1 x	Propeller MENZ-S 20x6 Pusher
1 x	Aero-Master Wings (Aero-naut)
1 x	Slave-cable USB Easy Sim

5,529.88EUR