119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 120x60 mm SLH KOVO wheel
1 x Starter EM Gear Power 80
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Turbina KINGTECH K320 G5
1 x Electric Landing Gear AVANTIA XS
1 x Servo digital 17g MG - Std
1 x ABS tube 8.0x7.0x1000 mm
1 x Solvent Plasti Dip 1000 ml
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Spring lock washer 2.6 mm (20 pcs)
2 x Cabel "Y" 30 cm (Futaba)
1 x 1/6 Pilot "Garry"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Tube support Ø 6mm (10 pcs)
1 x Pilot "Duke" Legends Series (Slimline)
2 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Angle support XT60 conector
2 x Extension silicon 75 cm (Graupner)
1 x Support FUEL DOT V3
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Civilian pilot "Joe" size 9cm (Slimline)
2 x Adapter lead MPX/XT60
1 x Extension 90 cm (Futaba)
2 x Extension 30 cm (Futaba)
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x 
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Cable coupler M2 (10 uds)
1 x 100g Flux Paste for Silver Solder
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x Wheel collar 2 mm Ø (4 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x 80x40 mm hard foam KOVO wheel
1 x BOEING 727, Jet pipe for Boeing 727
1 x 73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x 110x55 mm C SLH KOVO wheel
1 x 32x9 mm foam standar KOVO wheel (2 pcs)
2 x Motor A2212/13T
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x 89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x 120x60 mm C SLH KOVO wheel
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Jeemo Dolly
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x Fuselage Bags JEEMO
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x Oracover light Grey 2m
1 x Antonov AN2 Scale 1/6 - 3m
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x T-shape holder metal LAMA
1 x Extension silicon 100 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension 15 cm (Futaba)
1 x 200 mm extensión servo HITEC/JR
1 x Extension silicon 35 cm (Futaba)
1 x Connector Sub-D 2+5 Male
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Dean "T" - Futaba Adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x UHU Por 50ml/40g
1 x DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x Extension silicon 50 cm (Graupner)
1 x Circlick securite
1 x Cable S.BUS 3 salidas 300 mm
1 x Extension silicon 10 cm (Futaba)
1 x Futaba male 40 cm extension
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Futaba Female 40 cm extension
1 x Extension silicon 100 cm (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 30 cm female (Futaba)
1 x Extension silicon 35 cm male (Futaba)
1 x Extension PVC 150 cm (Graupner)
1 x Extension 7.5 cm
1 x Cable S.BUS 3 salidas 100 mm
2 x Extension silicon 10 cm (Graupner)
1 x Extension silicon 50 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension 100 cm (Futaba)
1 x Extension silicon 30 cm female (Graupner)
1 x Cabel "Y" 15 cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x Extension silicon 75 cm (Futaba)
1 x Extension silicon 25 cm (Graupner)
1 x Connector CAN 15
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Cabling for Fox MDM1 wings
2 x CC 01
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 2 LiPo XH>EH adapter
1 x DPSI Ampere battery backer
1 x APM2.6 Power module with 5.3V DC BEC
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x CM-3
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Connector Sub-D 2+5 Female
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 30 cm BEC cable (male)
1 x Adapter lead MPX/EC3
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x Pegamento Pu R 50g polyuretano
1 x Wheel FEMA 152 mm / 8 mm
1 x Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m
1 x Wheel 18 mm
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Wheel FEMA 112 mm / 6 mm
1 x 60x25 mm tail wheel "type F3A"
1 x Wheel Ø 90 mm (1 ud) Electron Retracts
1 x SKY RC Temperature Sensor
1 x 45 mm white plastic spinner for fixed propeller
1 x Starter EM Gear Power 250
1 x Decorative caps, multicoloured
1 x Foam plastic plates (310x210x3 mm)
1 x ABS I Strip 20x10x1000 mm
1 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x 25 mm fenders (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x 12 mm portholes (10 pcs)
1 x 10 mm portholes (10 pcs)
1 x "L" servo arm 65x49 mm (2 pcs)
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x Servo M2x9/16 screw (4 pcs)
1 x Round Rod 2,5x1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Xplorer2 anemometro
1 x Servo Arm aluminium ALU-STAR
1 x SKY MASTER 3.000 mm ARF
1 x 3.2 mm Prop Adapter M8
1 x 11x7 tree blades propeller
1 x 12 mm mast holder
1 x 1000 ml sealer (DOPE)
1 x 16x10 tree blades propeller Master Airscrew
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x PSC 5
1 x Long Switch On/Off micro
1 x Hacker X-Pro USB interface V2
1 x Cabel "Y" 30 cm (graupner)
1 x DUPLEX 2.4 EX MVario2
1 x DUPLEX 2.4 EX MBar
1 x DUPLEX 2.4EX MULi 6s M
1 x DUPLEX 2.4EX MUI 75
1 x Cabel charger transmitter GRAUPNER
1 x Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Extension lead 15 cm Multiplex
1 x 3 LiPo XH>EH adapter
20,369.28EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies