1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
3 x Chaleco Hispano Aviación
1 x Chaqueta Hispano Aviación
1 x Bisagra papel CA (12 uds)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Gafas Ace
1 x Destornillador Allen 1.27 mm
1 x Varilla carbono 4.0 mmx1000 mm
2 x Piloto militar "Kamikaze" tamaño 9cm (Slimline)
2 x Piloto 1/6 "Cindy"
1 x Cable servo 5 lineas negro (1m)
1 x Piloto "Duke" Legends Series(Slimline)
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
1 x Cable servo JR silicona 0,35 mm2 / 5m
1 x Crimpadora
1 x Bisagra 25 mm reforzada
1 x Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x Piloto 1/7 "Japonés"
1 x Cable servos silicona 0,35 mm2 Graupner (100 m)
1 x Varilla carbono 10 mm x 1000 mm
1 x Bisagra de nylon 15x0,3 (10 pcs)
1 x Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
2 x Varilla carbono plana 1000x3.0x1.0 mm
1 x Piloto civil "Curt" tamaño 9cm (Slimline)
1 x Gancho de remolcador
1 x Ferrita 14x8x5.5 mm
1 x Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x Piloto JET 1:3,5
1 x Carro remolque para veleros 720 x 239 mm
1 x Clevis con trasmisión M3
1 x Cable silicona 0,25 mm² negro (25 m)
1 x Piloto JAN 1/4 Veleros
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x Equilibrador hélices
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Bisagra de nylon flaps 33x9 (2 pcs)
1 x Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x Piloto 1/4 "Heidi"
2 x Destornillador allen 3,0x60 mm molibdeno
1 x Piloto 1/6 "John"
2 x Piloto civil "Joe" tamaño 9cm (Slimline)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Barra pegamento caliente Verde
1 x Cable servo PVC 0,14 mm2 FUTABA (5 m)
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Gafas Stratus
1 x Barra pegamento caliente Negro
1 x Bancada servo gancho
1 x Gancho de remolque hasta 3m
1 x Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x Piloto "Dick" Legends Series(Slimline)
1 x Varilla carbono plana 1000x6.0x0.8 mm
1 x Varilla carbono 2.5 mmx1000 mm
1 x Bisagra Larga flexible (12 uds)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Terminales riostras M2,5 (2 pcs)
1 x Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
2 x Piloto 1/12 "Fighter"
1 x Cable servos silicona 0,50 mm2 Graupner (100 m)
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x Cono hélice fija 42 mm diámetro / eje 5,0 mm
1 x Soporte conector MPX (6 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable silicona 0,25 mm2 blanco (100 m)
1 x Rótula MAXI con bola/saliente M3 (2 uds)
1 x Plasti Dip Liquid Tape 429 ml rojo
1 x Rótula V2 M2 5Diam negra (2 pcs)
1 x Rótula con bola M2 (10 pcs)
1 x Cono 42 mm EXTRA 330SC
1 x Cera desmoldeante 650 g
1 x Cono NUT M8x1,25
1 x Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x Rótula MAXI sin bola M3 (2 uds)
1 x Rótula larga M2 con bola/tornillo (6 uds)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Rótula corta M2 con bola/tornillo (6 uds)
1 x Pintura GHT Lexan negro 150 ml
1 x Barniz Tensor 1000 ml
1 x Rótula larga M3 con bola/tornillo (6 uds)
1 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x Varilla carbono 0.5 mmx1000 mm
1 x Varilla carbono 16 mm x 1000 mm
1 x Varilla carbono 6.0 mmx1000 mm
1 x Varilla carbono 3.0 mm x 1000 mm
2 x Ferrita 17x10x6.5 mm
1 x Punta recambio soldador KAVAN 668838
1 x Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
2 x Fresa corte diamante Ø 2.3mm (bola)
1 x Mango para lima PERMAGRIT
1 x Varilla carbono 1.5 mm x 1000 mm
1 x Varilla carbono 2.0 mmx1000 mm
1 x Varilla carbono plana 1000x3.0x0.5 mm
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Varilla carbono 7.0 mmx1000 mm
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Sistema para cables con tensor (negro)
1 x Alicate para "Ball-Link"
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Pasacables con soporte GFK "A" (2 pcs)
1 x Medidor angulos y/o incidencias
1 x Batería Sanyo Eneloop RX 6,0 V FUT
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Adaptador prision. 5 mm "long"
1 x Inversor de servo
1 x Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Micro Cristal RX 35.010 Ch 61
1 x Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x Porta kwiw link M2 (10 pcs)
1 x Dremel 3000 130W
1 x Destornillador allen 1,5x50 mm molibdeno
1 x Corta tubos aire
1 x Copiador 5 unidades de 20 cm
2 x Tensor de riostras M3 33x49 (2pcs)
1 x Electrodos de plata 55% (2 pcs)
1 x Acoplador "Z" Ø 2 (2 uds)
1 x Medidor de incidencias
1 x Tijeras curvas 16cm - GFK/CFK/Aramid
1 x Piloto 1/6 "Tony"
1 x Soporte soldadura universal aluminio
1 x Piloto 1/12 "Tom"
1 x Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Soporte para aviones
1 x Juego llaves allen Extra-duro Titanium (1.5/2.0/2.5/3.0)
1 x Soporte WingFix ULTRA BE
1 x Tensor de riostras M2x22/35 (2pcs)
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Alicate para "Ball-Link"
1 x Kwik link blanco largo (10 pcs)
1 x Piloto 1/4 "Mike"
1 x Lima redonda PERMAGRIT 18 mm para Dremel
1 x Soporte lija 25 mm
1 x Batería Sanyo Eneloop RX 4,8 V JR
1 x Carro remolque para veleros 720 x 285 mm
1 x Cable servos PVC 0,25 mm2 Graupner (5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x Equilibrador hélices
1 x Prolong. XH / XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x Cable servos silicona 0,25 mm2 Graupner (100 m)
1 x Prolong. XH / XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x Cable silicona 4,0 mm2 rojo (25 m)
1 x Tensor de riostras M2,5x32/48 (2pcs)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Acoplador M2 (10 uds)
1 x Gancho de remolque + 4,5 m
1 x Sistema para cables con tensor (silver)
1 x Filtro para bomba vacio
1 x Acoplador M2,5 Ø 3 mm (10 pcs)
1 x Adaptador de hélice 3 mm M6
1 x Adaptador de hélice 4 mm M6
1 x Adaptador de hélice 3 mm M6
1 x Plancha para entelar mini
1 x Acoplador "Z" Ø 1.8 (2 uds)
1 x Acoplador "Z" Ø 1 (2 uds)
1 x Hélice MENZ-S 21x10
1 x Adaptador de hélice 3.17 mm CN-Spinner
1 x Programador HPP-21 PLUS HITEC digital servos PC
1 x Inversor de servo
1 x Tester servo Profesional
1 x Tester para servos
1 x Programador HITEC DPC-11
1 x Actuador lineal HLS12-100210-7.4v
1 x Micro Cristal RX 35.120 Ch 72
1 x Brazo servo FUTABA long (8 pcs) DUBRO
1 x Rótula con rodamiento M2,5 22x5,5
1 x Cristal Universal RX 35.130 Ch 73
1 x Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
1 x Adaptador de hélice 3,2 mm M6
1 x Adaptador de hélice 5 mm M8
1 x Hélice MENZ-S 21x10 Tripala
5,970.55EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas