Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor B40 9L + MAXON 4,4:1 Keramik
249.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Extinguisher CO2 - 2 Kg
2 x	GameCommander USB Universal
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	Slave-cable USB Easy Sim
4 x	Interface Jack Adapter IKARUS
3 x	Jeti Black cap
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
2 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Brass ball links BS M3 V1 (10 pcs)
2 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Long pinned hinge (6 uds)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Support Pitot JETI
1 x	3,2 mm Prop Adapter M6
2 x	Angle support XT60 conector
1 x	3.2 mm Prop Adapter M6
3 x	Interface Realflight Simulator
2 x	EasyFLY Addon
1 x	Threaded coupler M2 (10 uds)
1 x	Couple M4 for wire (10 pcs)
2 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	300 Newtons FEMA absorber
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	55% silver electrodes (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Pulley brass 12/2 (2 pcs)
1 x	Wire easy tensioner (red)
1 x	Kwik link with arm M3xM2xL24
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Pulley brass 10/2 (2 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	USB Charger 12V DC for car
1 x	ABS tube 5.0x4.0x1000 mm
2 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Support XT60 conector (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Adaptadores carga 6s JST-XH
1 x	Charger LiPo Charger4
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Support pump Xicoy X45
1 x	Aro pasacable Ø25 mm (4 pcs)
2 x	Soporte filtro FESTO (4 pcs)
2 x	Recessed MPX connector support (6 pcs)
2 x	ABS tube 4.0x3.0x1000 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Support FUEL DOT V3
2 x	Tapa estado carga XT-60 (6 pcs)
2 x	ABS tube 5.0x4.0x156 mm
3 x	ABS tube 3.0x2.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	Support pumb/filter Xicoy X45
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
2 x	Soporte grifo FESTO (2 pcs)
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Tube support Ø 6mm (10 pcs)
1 x	ABS tube 9.0x7.0x1000 mm
3 x	ABS tube 6.0x5.0x1000 mm
2 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 9.0x8.0x1000 mm
2 x	ABS tube 7.0x5.0x1000 mm
1 x	Support ECU Xicoy X-45
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	ABS tube 8.0x7.0x1000 mm
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	10 mm Prop Adapter M12
2 x	RF9 Flight Simulator with Spektrum Controller
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	3 mm Long Prop Adapter M5
1 x	6 mm Prop Adapter M8
1 x	Giant Scale Muffler D.A. 70
1 x	F1 Prop Cap Can (Fuel Container Conection)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	DSM 10 Dual Switch Mixer
1 x	Neck strap JETI DS
1 x	Winter-Glove DS tx
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	Caps multicolor Switch JETI
1 x	Hand Pads for Tray JETI
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	T-Motor U7-V2.0 Kv420
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Lipo KAVAN 3300 mAh 7.4v 40/80C
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	5 mm Prop Adapter M6
1 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	MultiLog Altimeter
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x	ABS tube 18.0x16.0x1000 mm
2 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Propeller POWER-PROP 7x7
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Support conector MPX (6 pcs)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon plate 350x150x3.0 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	POLARON EX 800w charger
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)

5,673.93EUR