1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Conector MR-60 (pareja) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Adaptadores carga 6s JST-XH |
1 x | Extension MPX-MPX 20 cm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Couple M4 for wire (10 pcs) |
2 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Angled clevis with threaded rod M3 |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Spray Graphit 33 |
3 x | Universal Colour Paste deep black 50 g |
3 x | Release wax 250ml |
1 x | Spray EC Red 400ml |
1 x | CC 03 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | CC 05 |
1 x | Adapter lead MPX/XT60 |
2 x | 2 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | CC 01 |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | USB HLS prog. interface |
1 x | JETImodel SINGLE BEC |
1 x | 4 LiPo XH>EH adapter |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Dean "T" - Futaba Adapter |
2 x | CC 02 |
1 x | 30 cm BEC cable (female) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Z Bender - S Type Tool |
1 x | Ball Link Plier |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Oratex Silver 2m |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Glases Moritz |
1 x | Glases Ace |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Propeller POWER-PROP 13x9 |
1 x | Rubber profile 10-2 mm 2M |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Metal clevis M3 (10 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Nitroverdu 500 ml |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | 500 ml sealer (DOPE) |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon plate 700x550x0.5 mm |
1 x | TX 250 mW especial GOPRO |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | SPS Remote switch actuator |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | MPX Sub-D Adaptor |
1 x | Retract undercarriage |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
2 x | TrainerCord (master-learner) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 3 LiPo XH>EH adapter |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Male connector for 6 pines AWG |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Extension 5 lipos JST - JST/C |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PSC 5 |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Male Prolonger TP 4/5S |
1 x | Connector Sub-D 2+5 Female |
1 x | Circlick securite |
1 x | 30 cm BEC cable (male) |
|
8,762.92EUR |