Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	LA500 rotor head core
1 x	Piñon motor rotor LA-500
1 x	LA500 freewheel bearing
2 x	Screws flush mount M2
1 x	LA500 housing-lower cyclic
1 x	Head upper part
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	USB Mini Camera endoscope
1 x	Strip 2,5x1,25x330 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
2 x	Surface Indicator Gauge Small
1 x	Small aluminium horn blue (2pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Strip 1,5x1,5x330 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Horn 5/20 with M2 Bearing
1 x	Round Rod 3,0x1000 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Horn with ball 40x30
1 x	Round Rod 2,0x1000 mm
1 x	Tow hook for tug
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn for flap control (1 pcs)
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Strip 3,5x1,75x330 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	WingFix ULTRA Black Edition
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Field folding model stand
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	LOWER TOW HOOK
1 x	Fixed launching hook
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Ferrita 17x10x6.5 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Ferrita con funda
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Round Rod 2,5x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
2 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Extension 100 cm (Futaba)
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	ABS angle 5,0x5,0x1000 mm
2 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	100g Flux Paste for Silver Solder
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Cut tube
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Futaba Female 40 cm extension
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	DPS Switch JR/JR
1 x	2 LiPo XH>EH adapter
1 x	EC-Cutter
1 x	Head core
1 x	Ball joint long
1 x	Cierva C30 spanish decoration Stickers
1 x	Nut M2
1 x	Screw M3x16
1 x	Servo Fork
1 x	Nut M1,6
1 x	Cierva C30 Elevator
1 x	Head runner
1 x	Blade holder upper
1 x	Cierva C30 simulated motor
1 x	Head lower part
1 x	Blades 330mm
1 x	Blade holder lower
1 x	Head core bushing
1 x	Nut M2 securing
1 x	Complet landing gear
1 x	Baering 3x8x4
1 x	Raer wall
1 x	Bearing 3x6x2,5
1 x	Steering lever
2 x	Head lower part New
1 x	Cierva C30 Body Spain
1 x	Screws M1,6x6 Allen
1 x	Blade holder center
1 x	Wheel keeper washer
1 x	Balls 4 mm
1 x	Screw M2.5x5 (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Nylon Screw M5x30
1 x	Small aluminium horn gold (2pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Short adjustable control horn 3x24
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Servo TOPMODEL STANDARD S3217
1 x	Flat washer 3.2 mm (20 pcs)
1 x	90x60 mm standart servo cover
1 x	Brass control horn M2 large for wire (2pcs)
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Canopy Latch
1 x	Screw M2.5x10 (10 pcs)
1 x	Socket Head Screw M2,5x12
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw M3x5 (10 pcs)
1 x	460 mm EPP Floats
1 x	Ball Link Plier
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Screw M2.5x20 (10 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Servo MKS HV69
1 x	Servo NARO Max Std
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Servo Metal Horn 15.5 mm MKS
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Servo TOPMODEL DS9010 T
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	Pushrod greyline 3/2 with coupler M2
1 x	58 mm micro servo cover
1 x	Cable with accesories
1 x	Servo MKS HBL599 SL
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Horn 6/27 with M3 Bearing
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	DEMON CORTEXpro
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	One touch canopy lock
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Screw M4x12 (10 pcs)
1 x	PowerBox Battery 4000
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	4 mm Prop Adapter M6
1 x	PowerBox 12
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Safetyclip MPX (6 pcs)
1 x	Interface Realflight Simulator
1 x	Slave-cable USB Easy Sim
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	SAVOX SH 0254 servo
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	Towing hook <3m
1 x	5 mm Prop Adapter M8
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Towing hook
1 x	3 mm Short Prop Adapter M5
1 x	Adjustable launching hook
1 x	Dremel 3000 130W
2 x
1 x	2,0x50 mm allen screwdriver
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Dust collector for mould cleaning
1 x	1,5x50 mm allen screwdriver
1 x	Crimping tool
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Hot Glue Stick GREEN
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs

2,832.69EUR