1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x 800TVL CMOS camera for FPV
1 x TrainerCord (master-learner)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x USB HLS prog. interface
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TP/TopFuel - XH 2/3S Adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 2 LiPo XH>EH adapter
1 x CC 01
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cabel charger transmitter GRAUPNER
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 30 cm BEC cable (female)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Adapter lead MPX/EC3
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x JETImodel SINGLE BEC
1 x BEC 3A FOXY
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 5 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x ABS tube 9.0x8.0x1000 mm
2 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 4.0x2.0x1000 mm
2 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
2 x ABS tube 12.0x10.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
2 x ABS tube 6.0x4.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 8.0x7.0x1000 mm
2 x ABS tube 3.0x1.0x1000 mm
2 x ABS tube 7.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
2 x BALSA trip 6.0x6.0x1000 mm
2 x Pine wood slat 10x10x1000 mm
2 x Trailing edge BALSA 35x8x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x 25 mm reinforced hinge
1 x Truck-trailer for gliders 720 x 239 mm
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x XH female balance (4S) connector (2 pcs)
1 x FX three-position switched channel, long
1 x Support pumb/filter Xicoy X45
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x PWC4 wing/fuselage connector for 4 servos
1 x Extinguisher CO2 - 2 Kg
1 x 4 LiPo XH>EH adapter
1 x 120x60 mm SLH KOVO wheel
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x CC 03
2 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
2 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x 
1 x A/C quality beech plywood 600x300x1.5 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
2 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Beech dowels 4.0 x 1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Interface Jack Adapter IKARUS
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x SIMtransmitter 6 Mode 2
1 x Balsa panel 6.0x100x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
3 x Xplorer1 anemometro
3 x Xplorer3 anemometro
2 x Xplorer4 anemometro
2 x T-Motor U7-V2.0 Kv420
1 x Silicone red 0,25 mm² wire (25 m)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x 20x1000 mm Ring Strap Back To Back
1 x 40 mm gas motor standoff
1 x 10 mm gas motor standoff
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Crystal Universal RX 35.140 Ch 74
1 x Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x BALSA leading edge 8x10x1000 mm
1 x Reed valve for DA 50-R
1 x SAITO FG-36 carburetor
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium ignition bad (blue)
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Electric Fuel Pump 12v
1 x Xplorer2 anemometro
1 x Sparkplug 1/4-32
1 x PowerBox Smokepump
1 x KAVAN Hand crank fuel pump
1 x Bujia OS G5 gasolina
1 x Variable Flow Smoke Pump System
1 x Electric Fuel Pump 12V
1 x Smoke pump RCEXL
1 x Sparkplug 1/4-32 Glow
2 x AXI 2204 Multicopter
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Combo 4 pcs AXI 2204 Multicopter
1 x ESC ALPHA 60A HV
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
5,261.90EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies