Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak ECU converter KingTech
79.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Acoplador para cable M4 (10 pcs)
4 x	Acoplador M2,5 Ø 3 mm (10 pcs)
3 x	Acoplador M2 (10 uds)
4 x	Ball link ALU M2/2 con rodamiento (1 pcs)
3 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
4 x	Acoplador M3 (10 uds)
1 x	Ball link Aluminio M3 (2 pcs)
4 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
5 x	Acople ALU M3 Ø 4 (2 uds)
4 x	Acoplador M2,5 Ø 2 mm (10 pcs)
4 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
2 x	Ball link ALU M3/2 con rodamiento (1 pcs)
5 x	Acople ALU M2 Ø 4 (2 uds)
4 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
3 x	Acople ALU M2,5 Ø 4 (2 uds)
5 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
3 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
3 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Equilibrador hélices
1 x	Medidor de incidencias
2 x	Soporte para aviones SebArt
1 x	Medidor angulos y/o incidencias
1 x	Soporte WingFix ULTRA BE
1 x	Equilibrador hélices
1 x	Carro remolque para veleros 720 x 285 mm
3 x	Gafas Innovation Plus
1 x	Gafas Stratus
1 x	Gafas Nimbus
2 x	Gafas Aspen
2 x	Bomba de vacio P1-N
1 x	Alicate para "Ball-Link"
2 x	Acumulador polvo para limpieza moldes
3 x	Barra pegamento caliente Rojo
1 x	Crimpadora
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
2 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
2 x	Bascula precision 0.1-2000 g
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Arrancador Sullivan-STAR 601
1 x	Copiador 5 unidades de 20 cm
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
2 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Bascular < 40 Kg
1 x	Copiador 2 unidades de 20 cm
1 x	Crimpadora
2 x	Destornillador allen 3,0x60 mm molibdeno
1 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Arrancador 12v (Max 180 and 30ccm)
2 x	Barra pegamento caliente Verde
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Bomba de vacio 12 CFM completa
2 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Terminales riostras M2 (10 uds)
1 x	Palas de autogiro de 330 mm
2 x	Sistema para cables con tensor (silver)
2 x	Tensor de riostras M2,5x27/43 (2pcs)
1 x	Gafas Zurich Sport Sunglasse Dark Sensity BROWN
2 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Gafas Moritz
1 x	Gafas Flitemaster
1 x	Caja para guardar baterías LiPo "BIG"
1 x	Caja para guardar baterías LiPo "Tipo P"
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Soporte bateria LiPo V2 M (negro)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Fresa corte diamante Ø 2.7mm (bola)
2 x	Extintor CO2 - 2 Kg
1 x	Tornillo allen M2x3 mm (4 pcs)
1 x	Tuerca para insertar M5 (10 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Brazo direccional 12 mm Ø 4 mm
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Lija con papel de 13 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Espatulas madera (150x18x1.5mm) 100 pcs
1 x	Arrancador EM Gear Power 250
1 x	Perforador hélices para EME35 y DLE35
1 x	Pistola termica MH 550 micro
1 x	Destornillador Torx® TX6
1 x	Tijera Aramid 21 cm/8" PROTON
1 x	Sistema para cables (plata)
2 x	Sistema para cables con tensor (rojo)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
2 x	Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link con brazo M3xM2xL24
1 x	Polea de bronce 2,5/1 (2 pcs)
2 x	Porta kwiw link M2 (10 pcs)
1 x	Tornillo M3x0,5x8 mm Cabeza Plana Titanio (4 pcs)
1 x	Avanti XS Jet, Soporte fuselage (SebArt)
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	Arandela abierta 4.1 mm (20 pcs)
2 x	Acoplador "Z" Ø 1.8 (2 uds)
2 x	Porta kwiw link M2,5 (10 pcs)
4 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Set clevis para pull-pull (TY13233 y TY13234)
1 x	Tensor de riostras M2,5x32/48 (2pcs)
2 x	Pasacables con soporte GFK "A" (2 pcs)
2 x	Pasacables con soporte GFK "B" (2 pcs)
2 x	Pull-Pull set completo acero inox. 3 m (max 20 kg)
2 x	Tensor de riostras M2x22/35 (2pcs)
2 x	Sistema para cables con tensor (azul)
3 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Terminales riostras M2,5 (2 pcs)
1 x	Polea de bronce 12/2 (2 pcs)
1 x	Kwik link micro (10 uds)
2 x	Kwik link con brazo M5xM2,5xL30
1 x	Polea de bronce 14/2 (2 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x	Polea de bronce 5/1,5 (2 pcs)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
1 x	Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
1 x	Polea de bronce 4/1,5 (2 pcs)
1 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	Avanti XS Jet, Deposito Keroseno (SebArt
1 x	Avanti S, Funda cabina (SebART)
1 x	Avanti XS 1.8m Jet FREECE TRICOLORI con tren aterrizaje (SebArt)
1 x	Mini AVANTI S Jet, Soporte (SebArt)
1 x	BULL MØ1 2.600mm GREEN
1 x	Set DECO Ultimatum 2.0 - Andy Folienwelt
1 x	Avanti XS 1.8m Jet RED Style (SebArt)
1 x	Deposito ULTIMATUM 2.0 (3.2 L) PRO
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Motor Mega AC 16/25/02
1 x	Avanti XS 1.8m Jet Blanco/Azul (SebArt)
1 x	Sistema para cables con tensor (negro)
1 x	Tensor de riostras M3 33x49 (2pcs)
2 x	Pull-Pull set completo acero inox. 4 m (max 20 kg)
1 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	Sistema para cables (rojo)
2 x	Polea de bronce 8/2 (2 pcs)
1 x	Avanti S 2.3m Jet AMARILLO/NEGRO + Tren retráctil (SebArt)
1 x	Motor Mega AC 16/07/03
1 x	Motor Mega AC 16/30/01
1 x	Servo NARO Max Std
1 x	ULTIMATUM 2.0 m Red Bull
1 x	Aro soporte P-20 OPUS V-Jet 60mm
1 x	ULTIMATUM 2.0 m yellow/blue
1 x	Juego llaves allen Extra-duro Titanium (1.5/2.0/2.5/3.0)
1 x	Monokote AZUL metalizado (1.8x0.65m)
1 x	Funda plancha entelar PROF
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	DUPLEX 2.4EX Central Box 220
1 x	DUPLEX 2.4EX MULi 6s M
1 x	Kwik link blanco largo (10 pcs)
1 x	Kwik link pequeño (10 pcs)
1 x	Round Rod 1,0x3,5 cm
1 x	Tensor de riostras M1,6x20/30 (2pcs)
1 x	Tensor de riostras M2x29/43 (2pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Medidor ángulos
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Gafas Ace
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Lipo "Airsoft" 1200 mAh 3S 11.1v 25C T-Plug
1 x	Soporte bateria LiPo V2 S (negro)
1 x	Soporte aluminio bateria rojo
1 x	Caja para guardar baterías LiPo Std
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Disco Corte Proxxon/Dremmel 22 mm
1 x	Funda plancha entelar STD
1 x	Barra pegamento caliente Negro
1 x	Círculo autoadhesivo 15 mm (30 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Destornillador Allen 1.27 mm
1 x	Bateria RX JETI LiIon RB 2600 7.2v
1 x	DUPLEX 2,4 EX MVario2
1 x	Correa JETI DS
1 x	Cable PPM - Jack (mono) DC/DS Tx DUPLEX 2.4EX
1 x	Alicate para hacer "Z"
1 x	TX 250 mW especial GOPRO
1 x	Terminales riostras M3 (10 uds)

31,930.60EUR