Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	Angled clevis with threaded rod M3
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Threaded coupler M2 (10 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
2 x	Threaded coupler M3 (10 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Z type of cable coupler Ø 1.8 (2 uds)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
3 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	18 mm reinforced hinge
1 x	Gates hinge aluminium (1 pcs)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Gates hinge
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	SE Ring 200 mm (2 pcs)
1 x	Marker ties (20 pcs)
2 x	Tape GFK 38 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 480 mm (2 pcs)
1 x
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Conector BEC male (10 pcs)
1 x	White smoke canister 100 g
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	LA500 nose
1 x	Cierva C30 Body Spain
3 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
2 x	Pulley brass 2,5/1 (2 pcs)
1 x	Turnbuckle M2x29/43 (2pcs)
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Wire easy tensioner (silver)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Landing gear retract neumatic (Jet Legend)
1 x	White large kwik link (10 pcs)
1 x	EasyFLY Addon
1 x	Support conector MPX (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Small pinned hinge (6 uds)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Flap hinge (6 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	Round flex hinge (12 uds)
1 x	Medium pin type hinge (12 uds)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Ball link M3 (10 pcs)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Long ball link M3 (6 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Towing hook
1 x	Adjustable launching hook
1 x	SERVO HOLDER
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Pulley brass 14/2 (2 pcs)
1 x	Servo MKS 6100 DS
1 x	Servo HITEC D645 MW
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo MKS HV69
1 x	Servo holder for retract
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Servo HITEC HS-325 BB
1 x	Aluminium servo arm (2 uds)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Horizontal mounting servo holder
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Piñones SAVOX SH-0350
1 x	Servo AN-20 MGBBA
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Cinta Goldfix 1m
1 x	Futaba 52 mm servo arm
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	PPM Encoder Module
1 x	PT 20x13 EL Propeller
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Support FUEL DOT V3
1 x	Recessed MPX connector support (6 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Micro Crystal RX 35.080 Ch 68
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Logo 400 SE VBar
1 x	VBar NEO VLink 6.x Express, neon-yellow
1 x	CORTEX
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Servoarm Aluminium SH-82
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Hose connector stopper 4 mm
1 x	KIRA 480-38 5,2:1
1 x	10-15mm Servo Arm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Propeller set 400 (2R+2L)
1 x	Micro Crystal RX 35.160 Ch 76
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	VBar Control Touch, midnight black
1 x	Bujia OS G5 gasolina
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	SERVO DES 568 MG
1 x	SERVO DES 588 BB MG
1 x	SERVO DES 806 Pignons
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Gear for MICRO BB
1 x	Sprung retractable undercarriage (Alfa model)
1 x	Servo SAVOX SV-1260 MG
1 x	Servo SAVOX SA-1256 TG
1 x	Servo SAVOX SV-1270 TG
1 x	Air pressure gauge
1 x	40 mm air cylinder
1 x	Gear for D 200 BX
1 x	Servo SAVOX SA-128S SG
1 x	Power supply NT 40 Amp.
1 x	SAVOX SH 1250 MG servo digi
1 x	PYRO 600-12
1 x	KIRA 600-30 6,7:1
1 x	KIRA 480-34
1 x	Kontronik Kosmik 30 cm Cable Kit
1 x	Motor OS 46 AX II
1 x	Motor OS 81 FS 4T
1 x	Motor OS 50 SX-Hyper
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Loctite HYSOL 9462
1 x	Hysol Mixing Caps SET with 10
1 x	KIRA 500-36 6,7:1
1 x	Shaft KPG25 4,2:1
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	OS Engine 105HZ-R Heli
1 x	OS 37 SZ-H, Crankshaft
1 x	Carburador OS (Type 40K) 46AXII
1 x	Cotton Flocks, bag/ 7 Kg
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Servo BMS-4112
1 x	Servo BLS-M55B 61.2kg
1 x	SSPS105 Super Hi-Power servo

9,641.95EUR