1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x PCARD Wireless System
3 x Green smoke canister 100 g
2 x Plastic caps for AIR BURTS (30 pcs)
1 x White smoke bombs AX-60 (5 pcs)
1 x Smoke set "M"
1 x Blue smoke canister 100 g
1 x Smoke set "Glider"
2 x Parachute expulsion foam
1 x Blue smoke canister 140 g
2 x Electric rocket starters (6 pcs)
1 x "S" set for boats
2 x AX-60 starters (5 pcs)
1 x Initior Receiver FRX2 Wireless
1 x White smoke bombs AX-3 (10 pcs)
1 x Green smoke canister 140 g
2 x White smoke bombs AX-9 (10 pcs)
2 x White smoke bombs AX-18 (5 pcs)
1 x White smoke canister 140 g
2 x Parachutist
1 x "S" set for planes
2 x B4-0 rocket charges (6 pcs)
1 x Red smoke canister 140 g
2 x Green smoke canister 65 g
2 x 3l Smoke oil
1 x Black smoke bombs AX-60 (5 pcs)
1 x "M" set
2 x AX-60 starters (5 pcs)
2 x Beech dowels 3.0 x 1000 mm
2 x BALSA trip 8.0x8.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
2 x Pine wood slat 2.0x10.0x1000 mm
2 x BALSA triangular 6x6x1000 mm
1 x LOWER TOW HOOK
1 x BALSA triangular 8x8x1000 mm
3 x SERVO HOLDER
2 x Mahogany wood slat 3.0x3.0x1000 mm
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
2 x BALSA triangular 15x15x1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
2 x BALSA triangular 10x10x1000 mm
2 x Beech dowels 2.0 x 1000 mm
2 x Pine wood slat 10x10x1000 mm
1 x Towing hook
2 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
2 x Walnut wood slat 1.5x1.5x1000 mm
2 x Pine wood slat 2.0x2.0x1000 mm
2 x BALSA trip 10x10x1000 mm
2 x Beech dowels 4.0 x 1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x Towing hook
2 x Liston HAYA 10 x 10 x 1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
2 x BALSA leading edge 8x10x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x U Profile ABS 3,0x6,0x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
3 x L-Connector 4.0 mm x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
2 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Profile ABS Square 1 x 1000 mm
2 x L-Connector 1.0 mm x 1000 mm
2 x T-Connector 4.0 mm x 1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
2 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
2 x ABS angle 4,0x4,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Cable with accesories
1 x Propeller balancer
1 x Oracover Black 10 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Red smoke canister 100 g
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Balsa panel 6.0x100x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x 2 piece mounting frame Battery 3200 / 4000
1 x PowerBox Battery 4000
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x DPSI Micro MPS
1 x DPSI RV Mini 5 (2008)
1 x DPSI V-Match
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x UHU Por 50ml/40g
1 x Profile ABS half cane 8.0x1000 mm
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
2 x FOAM - CURE™ (24g)
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
2 x Profile ABS half cane 3x1000 mm
1 x GPS Logger Dymond
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x T-Motor MN705-S Kv125 (pack 2 uds)
2 x Mahogany wood slat 1.5x1.5x1000 mm
1 x T-Motor U7-V2.0 Kv420
1 x Profile ABS half cane 2.5x1000 mm
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x X-RAY Micro QR (Tail Tube)
2 x XH female balance (2S) connector (2 pcs)
1 x XH male balance (6S) connector (2 pcs)
1 x Connectors MPX male
1 x XH female balance (6S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x X-RAY Micro QR (Elevator)
2 x Mixers smoke bombs AX-60 (5 pcs)
2 x Me-163
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x Jeti Advance Pro Program Card
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Jeti Box mini
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x LiPo Storage Box Type "P"
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x 11 mm Rubber pads (14 pcs)
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
2 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x Landing gear retract neumatic (Jet Legend)
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Cable grommet 9.5 mm (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 45 mm rods + T patellas set for direction control
1 x Cabin latch Fox MDM1 4m (pair)
1 x XH female balance (5S) connector (2 pcs)
2 x PowerBox MERCURY SR2
1 x BULLIT Wing 840 mm
1 x DOMINO 46-55 Trainer 1583 mm
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x CARBON CUB 15cc ARF 2280 mm
1 x Bidule 55 V3 2460 mm
1 x BULLIT Wing 1095 mm
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x PILATUS PC-6 Turbo Porter 33% 5.290 mm
2 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x DUPLEX 2.4EX Central Box 220
1 x TMM 1210-3S heli
1 x CC 01
1 x Rocket D3-P
1 x Conector BEC female (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x White silicone 0,25 qmm wire (100 m)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Battery Protection Circuit Board 22.2v 6s
1 x Esc KOSMIK 200+ HV
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x SAVAGE Max Red 1080 mm
1 x Connectors DEANS (T)
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x 30 cm DEANS female connector
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 4 LiPo XH>EH adapter
1 x White silicone 0,25 mm² wire (25 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (male)
1 x Cabel charger transmitter GRAUPNER
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Cable Cargador FUTABA
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cabel "Y" 30 cm (graupner)
1 x White silicone 0,25 qmm wire (150 m)
1 x Ventral support for AX-18/AX-60
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Rocket D9-7
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x KOBY 40 LV Esc
1 x Mini-Pix Esc 15 Amp
1 x JIVE 80+LV Esc
1 x Esc KOSMIK 210 HV-I COOL
1 x Battery bed V2_M (black)
2 x Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace)
2 x Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace)
2 x Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace)
2 x Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace)
1 x Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
1 x Cyano INSTA - CURE™ Pocket (18g)
1 x Catalyst INSTA - SET™ (235g)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x SKY MASTER 3.000 mm ARF
1 x Bidule 111 3000 mm
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace)
1 x Battery Lipo GENS 4000 mAh 7.4v TX
1 x Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace)
21,825.26EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies