Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Cinta Goldfix 1m
1 x	A/C quality beech plywood 600x300x0.8 mm
3 x	SE Ring 330 mm (4 pcs)
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
2 x	Spikes Band (5 m)
1 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA triangular 8x8x1000 mm
3 x	Tape GFK 50 mm
2 x	Slave-cable USB Easy Sim
2 x	A/C quality beech plywood 600x300x5.0 mm
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	RF9 Flight Simulator with Spektrum Controller
3 x	Tape GFK 38 mm
3 x	SE Ring 250 mm (2 pcs)
1 x	Tape GFK 25 mm
3 x	SE Ring 240 mm (2 pcs)
1 x	Interface Jack Adapter IKARUS
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x	20x200 mm battery rings
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 200 mm (2 pcs)
2 x	Balsa panel 8.0x100x1000 mm
1 x	SE Ring 360 mm (2 pcs)
2 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x
1 x	BALSA triangular 15x15x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	EasyFLY Addon
2 x	A/C quality beech plywood 1520x750x3.0 mm
2 x	SE Ring 350 mm (2 pcs)
1 x	Balsa panel 4.0x100x1000 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Ventus 1:4 set of instruments
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Tube Pitot to PIXHAWK
2 x	Strip 1,5x1,5x330 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Extension lead 15 cm Multiplex
1 x	Extension 100 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Futaba male 40 cm extension
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension 30 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 25 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Cabel "Y" 30 cm (graupner)
2 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
2 x	Softshell Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Motor DLE 430 cc - Paramotors
1 x	1/7 Pilot "Japanese"
1 x	Horn 16,5x20 mm (2 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Lense for Spotlights, 20mm
1 x	Ring 320 mm length (5 pcs)
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SIMtransmitter 6 Mode 2
1 x	GameCommander USB Universal
2 x	SE Ring 450 mm (2 pcs)
1 x	Round Rod 2,5x1000 mm
1 x	PIX Hawk with accesories
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Autogyro Cierva C30 Spain
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Interface Realflight Simulator
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Rotorshape Autogyro
2 x	Marker ties (20 pcs)
2 x	SE Ring 300 mm (2 pcs)
3 x	Futaba 30 mm servo arm with M3 ball link
2 x	Hitec 30 mm servo rounded arm
2 x	46 mm Futaba servo arm tandem with ball link
1 x	Futaba 17 mm servo arm with ball link HITEC
2 x	Hitec 46 mm servo arm with ball link
2 x	Futaba 24/30 mm servo pull-pull double arm with ball link
2 x	Vertical mounting servo holder
4 x	Hitec 25 mm servo arm with ball link
2 x	54 mm Futaba servo arm tandem with ball link
2 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
2 x	Brazo Servo XTorque 52 mm HITEC 25T-6
2 x	Futaba 14/20 mm servo pull-pull double arm with ball link
2 x	Futaba 30 mm servo rounded arm
2 x	Futaba 54 mm servo arm with ball link
2 x	Futaba 50/60 mm servo pull-pull double arm with ball link
2 x	XTorque CFK Servohebel 38 HITEC 25T
2 x	Soporte filtro FESTO (4 pcs)
2 x	Angle support XT60 conector
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	PowerBox MagSensor black connector SRS/Champion
1 x	PowerBox iGyro 1e
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	PowerBox DigiSwitch V2 MPX/JR
1 x	Extension for LC-Display 50cm
1 x	MicroMatch PowerBox
1 x	POWERBOX Magic Jeti Switch
2 x	BlueCom™ Adapter (iOS)
1 x	OLED-Display for PowerBox Mercury SRS
2 x	PowerBox iGyro SRS + GPS Modul
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Light System
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	ABS I Strip 20x10x1000 mm
2 x	Soporte grifo FESTO (2 pcs)
1 x	Futaba 38 mm servo arm with ball link
2 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	FUTABA 20 mm servo arm with ball link
1 x	17 mm servo arm with ball link DES Graupner
2 x	Futaba 25 mm servo arm with ball link
1 x	PCARD Wireless System
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	HITEC 20 mm servo arm with ball link
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Futaba 52 mm servo arm
2 x	Futaba 20 mm servo arm
2 x	Servo safety connector (10 pcs)
1 x	Futaba 38 mm servo arm
1 x	Adapter rotula M3
1 x	Hitec 38 mm servo arm
1 x	Hitec 52 mm servo arm
2 x	Horizontal mounting servo holder
1 x	CNC FPV Display screen&Transmitter Holder Vertical
2 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	TX 250 mW especial GOPRO
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Initior Receiver FRX2 Wireless
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	110x55 mm SLH KOVO wheel
1 x	Support pump Xicoy X45
1 x	Support conector MPX (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Recessed MPX connector support (6 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	External LED's (2 pcs)
1 x	Extension for SensorSwitch 60cm
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	XTorque CFK Servohebel 38
1 x	Telemetry SPEKTRUM
1 x	HDT Jet Central
1 x	Turbine CHEETAH 160 SE
1 x	Telemetry JETI
1 x	PowerBox 12

12,899.85EUR