Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Small pinned hinge (12 uds)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Glases Ace
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Glases Flitemaster
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	15 mm reinforced hinge
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	18 mm reinforced hinge
1 x	Glases Stratus
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	25 mm reinforced hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Glases Nimbus "Black"
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Gates hinge aluminium (1 pcs)
3 x	Glases Aspen
3 x	Glases Innovation Plus
1 x	Long pinned hinge (6 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Crimping tool
1 x	Servo NARO Max Std
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Screwdriver for Torx® TX6
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Hot Glue Stick GREEN
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Xplorer4 anemometro
1 x	Xplorer2 anemometro
1 x	Xplorer1 anemometro
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Extension silicon 100 cm (Graupner)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x	270 mm 3/3 mm shaft ship
1 x	Adap/Exten for Futaba 12-14C
1 x	Soporte filtro FESTO (4 pcs)
3 x	Glases Moritz
2 x	Actuador lineal HLS12-100210-7.4v
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Large flex hinge (12 uds)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x
1 x	ABS 500 x 400 x 1 mm (white)
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Buy Perforated film 100 cm / 10 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Hovercraft sailcloth
1 x	120x60 mm SLH KOVO wheel
1 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x
1 x	LA500 housing-lower cyclic
1 x	LA500 housing-upper cyclic
1 x	LA500 rotor head core
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Head core bushing
1 x	Cierva C30 Elevator
1 x	Transmitter Balancer Futaba T-10CG
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Cierva C30 Body Spain
1 x	Head lower part
1 x	Wheel keeper washer
1 x	Ball joint long
1 x	Rotor Mast
1 x	LA500 pre-rotation gear
1 x	LA500 nose
1 x	Steering lever
1 x	LA500 cyclic central part
1 x	LA500 tail empennage
1 x	Cierva C30 simulated motor
1 x	LA500 pre-rotation gear hub
1 x	Raer wall
1 x	LA500 rotor head shaft
1 x	Pilot LA 500
1 x	Head spacer
1 x	LA500 Blades
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Slider Extenion for CORE
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Motor KAVAN PRO 2225-1600
1 x	Crystal TX 35.180 Ch 78
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Foam plastic plates (310x210x8 mm)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Styrene plate 320x120x1.0 mm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	LUCAS pilot ARTF
1 x	Set cintas unión paracaídas 145 cm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Aramid 50 daN 50 m
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	IKARUS plane
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Bird (Aero-naut)
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
2 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	TWIST planeador gomas
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Windsock Ozone L - 700 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute BACKUP X100
1 x	Para-RC Mix
1 x	Wing OXY 0,5 pulgadas2
1 x	Parachute P4
1 x	NF-3X-80 liner Kit
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Blade holder lower
1 x	Screw M3x16
1 x	LA500 ciclic lever
1 x	Side rudder

9,197.37EUR