Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Flap hinge (6 pcs)
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	MZ-12, 6 Channel HoTT
1 x	Manometer 4 mm
1 x	Distanzstück motor OS 120 AX
2 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Aluminium sheet 500x250x0,5mm
1 x	Adjustable brass horn threaded M3
2 x	Decorative caps, multicoloured, short
1 x	Transmitter Crystal 35 Mc/s Ch 77
3 x	Conector JAPAN G2 Set 5 pares
2 x	MZ-10, 5 Channel HoTT
1 x	Receiver replacement antenna, approx. 85
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Quick hose connector 6-4 mm
2 x	Propeller G-Sonic 20x8
1 x	Receiver replacement antenna, approx. 15
2 x	Mini Infrared Thermomiter
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	POLARON EX 800w charger
3 x	Coupling bush 5 - 5 mm
3 x	Foreman, scale 1:32
3 x	Flap hinge 33x9 mm (6 pcs)
2 x	Canopy Latch
1 x	Transmitter GRAUPNER MZ-24 Pro
2 x	Propeller Pleg CAM-Prop 8x6
2 x	Charger LiPo Charger4
2 x	Spinner fixed propeller 42 mm / 5,0 mm
2 x	Decorative caps, multicoloured
1 x	Beech dowels 4.0 x 1000 mm
2 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Foam plastic plates (310x210x8 mm)
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	MZ-18, 9 Channel HoTT
1 x	Receptor GRAUPNER GR-24 HoTT
1 x	Spikes Band (5 m)
3 x	Hose clips 6 mm
1 x	AXI 2204 Multicopter
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Foam plastic plates (310x210x2 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Cooler motor type 300
2 x	76 mm light wheels (2 pcs)
1 x	64x20 mm (2.5") Type jets aluminium core wheel
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Retract undercarriage
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Cooler motor type 150
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	PT 20x13 EL Propeller
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	80x40 mm hard foam KOVO wheel
2 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
2 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	101x28 mm (4.0") Type jets aluminium core wheel
2 x	44.5x17 mm (1.75") Type jets aluminium core wheel
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	120x60 mm C SLH KOVO wheel
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Foam plastic plates (310x210x3 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Propeller 8x4 Electric
1 x	45x19 mm hard foam KOVO wheel (2 pcs)
1 x	Propeller 9x4,7 SlowFlyer
1 x	Cooler motor type 280
1 x	60x25 mm tail wheel "type F3A"
1 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Foam plastic plates (310x210x5 mm)
2 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x	Bearing block for noseleg landing gear
1 x	76x23 Ø3.5 mm aluminium core wheel
1 x	Propeller 3x3
2 x	100x50 mm SLH KOVO wheel
1 x	Foam wheel Ø 38 mm (2 pcs)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x	20 mm tail wheel for 0,5-1 Kg models
2 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	Cooler motor type 400
1 x	63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x	110x55 mm C SLH KOVO wheel
1 x	Propeller 10x4,7 SlowFlyer
1 x	Beech dowels 2.0 x 1000 mm
1 x	Propeller 3x2
1 x	89x25 mm (3.50") Type jets aluminium core wheel
1 x	PT 16x10 E Propeller
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	ESC ALPHA 60A HV
1 x	DJI FPV Combo
1 x	Interface Jack Adapter IKARUS
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Tail gear set (60-120 class)
1 x	Tailwheel for 60/120 size
1 x	Tray for FUTABA 14SG/16SZ
1 x	40 mm air cylinder
1 x	Quick hose connector 3-3 mm
1 x	Propeller hub spacer 8/5.5
1 x	Quick hose connector 3-3 mm
1 x	Check valve quick hose connector 4-4 mm
1 x	Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	Nose wheel 62 mm
1 x	Wheel 22 mm
1 x	Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm
1 x	SERVO DES 707 BB MG

5,878.83EUR