1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Brass rod Ø 0.5 mm x 1000 mm
2 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
2 x Straightened threaded rod M3 - 1m
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
3 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1000 mm
3 x Brass rod Ø 1.0 mm x 1000 mm
3 x Straightened threaded rod M2-1m
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Straightened rod Ø 5.0 mm x 1000 mm
3 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
3 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass control horn M4 short for wire (4 pcs)
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Horn for flap control (1 pcs)
1 x Cable with accesories
1 x Small aluminium horn blue (2pcs)
1 x Cable control set
2 x 6 mm aluminium horn with patella
1 x RH long aluminium horn (2pcs)
1 x Horn 6/35 with M3 Bearing
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x 
1 x Presto SF Light Filler styrene-free (420 g)
1 x Solvent Plasti Dip 1000 ml
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Universal Colour Paste deep black 50 g
1 x Partall paste 650 g
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CC 01
1 x CC 03
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x 2 LiPo XH>EH adapter
1 x Adapter lead MPX/XT60
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x TrainerCord (master-learner)
1 x CC 05
1 x 5 LiPo XH>EH adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x TP/TopFuel - XH 2/3S Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x JETImodel SINGLE BEC
1 x CC 02
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x 4 LiPo XH>EH adapter
1 x 30 cm BEC cable (female)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 3 LiPo XH>EH adapter
1 x MPX-Dean "T" Adapter
1 x Flat washer 1.7 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x MAX pilot ARTF
1 x Gates hinge black 30x16 mm (2 pcs)
3 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Horn 5/15 with M2 Bearing
1 x Small control horn with bearing (2 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
2 x Straightened rod Ø 4.0 mm x 1000 mm
1 x VBar NEO VLink 6.x Express, neon-yellow
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
2 x Straightened rod Ø 0.8 mm x 1000 mm
1 x 3,2 mm Prop Adapter M8
1 x 3,2 mm Prop Adapter M6
1 x XH female balance (6S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Conector Servo female 4 pines
1 x 2 mm female connector (2 pcs) with safety connector
1 x XT-60 connector (female)
1 x XH female balance (4S) connector (2 pcs)
1 x Glases Innovation Plus
1 x XH male balance (3S) connector (2 pcs)
1 x AC-10 pre-rotacion with motor
1 x 2.3 mm Adapter for 30 mm spinners
1 x 5 mm Prop Adapter M8
2 x Rotorshape Autogyro
2 x PSC 5
1 x Extension 5 lipos JST - JST/C
1 x Hacker X-Pro USB interface V2
1 x MPS Gas-Cap-Powerswitch
1 x SPS Remote switch actuator
1 x JETImodel Addcap 1640
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x XH male balance (6S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Horn 16,5x20 mm (2 pcs)
1 x Motor OS 81 FS 4T
1 x Glases Moritz
1 x Spinner 82mm Black ventilado
1 x SBEC Jeti
1 x PSC 6
1 x Pins M connect Multipin connectors AWG 20-24
1 x Prolonguer for Balancer Thunder Power 6S
1 x OS 37 SZ-H, Crankshaft
1 x Motor OS FS 75 AX
1 x Bujia OS G5 gasolina
1 x Carbon plate 350x150x3.0 mm
1 x Glases Stratus
1 x Glases Nimbus
1 x Glases Aspen
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Nimbus "Black"
1 x Spinner plastic red fixed propeller 30 mm
1 x 36 mm red plastic spinner for fixed propeller
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Axle for AXI 2212/xx motors
1 x Cono NUT 5/16"x 24 -M4
1 x Long Switch On/Off micro
1 x MAX BEC
1 x SPS 70V 100/200 A
1 x SPS 70V 140/280 A
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Landing gear strap medium (4 uds)
1 x Body for landing gear Ø 4 mm
1 x Aluminun wheel collar 4 mm Ø (4 uds)
2 x Festo 4mm Tubing Holder (10 uds)
1 x Dual Sequencer Gear and Canopy
1 x Aero shocks
1 x Landing gear strap large (4 uds)
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Multi-adapter balancer JST - TP
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x Servo JETI DSHV 3D13T (13 Kg)
1 x Angled clevis with threaded rod M3
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Nylon gear block Ø 4 mm (2 uds)
1 x Quick hose connector 4-4 mm
1 x Manometer 4 mm
1 x Mini neumatic retract landing gear
1 x Blades 330mm
7,177.62EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies