Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

enought units

Reviews

Customers who bought this product also purchased

MPS Gas-Cap-Powerswitch enought units	Propeller MENZ-S 17x10 enought units	Propeller MENZ-S 18x12 enought units
Cylidric hinge 33 mm Ø 2 mm (5 pcs) enought units	Cyano SUPER - GOLD™ (12g) enought units	Propeller MENZ-S 18x8 enought units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Xplorer3 anemometro
1 x	Green smoke canister 100 g
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	White smoke canister 65 g
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	3 LiPo XH>EH adapter
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	EasyFLY Addon
1 x	BALSA triangular 8x8x1000 mm
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Painting GHT Lexan Black 150 ml
1 x	Propeller balancer
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	WingFix ULTRA Black Edition
1 x	CC 01
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Electric rocket starters (6 pcs)
1 x	Smoke set "M"
1 x	MPX-Dean "T" Adapter
1 x	Battery charging cable XT60
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Xplorer2 anemometro
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Green smoke canister 140 g
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 25 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	Oracover Azul 2 m
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	500 ml sealer (DOPE)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Support Filtro FESTO
1 x
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Oracover Azul Cielo 2 m
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Recessed MPX connector support (6 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Towing hook <3m
1 x	30 cm BEC cable (male)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Ventral support for AX-18/AX-60
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	CC 05
1 x	Adapter lead MPX/EC3
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Remote electric ignition system
1 x	Straightened threaded rod M3 - 1m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm

2,860.30EUR