Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 27x14x7 mm
1 x	Ferrita con funda
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Ferrita 14x8x5.5 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Big Crow DLE-170M
1 x	ABS angle 6,0x6,0x1000 mm
1 x
2 x	Support FUEL DOT V3
2 x	Recessed MPX connector support (6 pcs)
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	Wood anchor 30 mm (2 uds)
1 x	Stick coupler Ms 15 mm
1 x	Railing L250 mm (10 pcs)
1 x	Rigid coupling brass Ø 5 mm L: 25 mm
1 x	Anchor of tow Met. 60 mm
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Anchor 25 mm (2 uds)
1 x	Ancla 16 mm (2 pcs)
1 x	Railing 5x100 mm
1 x	Mounting base Ms 8 mm
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 200 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Digital precision scale up to 2000 g
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support pump Xicoy X45
1 x	Cleat 10 mm (2 pcs)
1 x	Davit 70 mm (2 pcs)
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x	Bag JETI Duplex
1 x	Combo lighting module with covering drop shape
1 x	switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Aluminium servo arm (2 uds)
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Baseplate servo
1 x
1 x	SE Ring 480 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Lead with adhesive (2 pcs)
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Sensor Ignition RCEXL Universal
1 x	51 mm INO spinner (carbon imitation)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	USB Mini Camera endoscope
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	White silicone 0,25 qmm wire (100 m)
1 x	XT-90 connector (pair)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	XH male balance (7S) connector (2 pcs)
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Support conector MPX (6 pcs)
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support Filtro FESTO
1 x	Angle support XT60 conector
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Futaba Multi-Switch-Prop 12+2 MODUL
1 x	Emisora FUTABA T18 SZ + R7208SB
1 x	FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER
1 x	FUTABA T10 J T-FHSS
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Housing Ø 15 mm (20 pcs)
1 x	290x4 mm M4 shaft ship
1 x	Life guard Ø 35,0 mm (2 pcs)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	T-shape holder metal LAMA
1 x	290 mm M5 Prop shaft
1 x	Life guard Ø 8 mm (24 pcs)
1 x	Bisagra de remo metal 28 mm de largo (2 pcs)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	EWC6 40 cm wing connector
1 x	EWC3 40 cm wing connector
1 x	Switch Button DS Tx DUPLEX
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x	Fueling valve "Air"
1 x	SE Ring 400 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Cabel "Y" 15 cm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Robart Door Hinge (Pk2)
1 x	LiPo Storage Box Standard 1 Type 1
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	MR30 connector male
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	38x4,5 mm wires output (2 pcs)
1 x	Bungee HLG Premium
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 63 mm White
1 x	82 mm INO spinner (carbon imitation)
1 x	Pick up for motor Moki 250 cc 7 cylinders
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Captador RCEXL para DA
1 x	F3A carbon 95 mm spinner
1 x	25 mm carbon servo arm
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Cable video GoPro and 5V cable
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	MR30 connector female
1 x	Socket Screw M3x9 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	Spinner INOVA 45 mm White
1 x	Vacuum pump 12 CFM
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	102 mm INO spinner (carbon imitation)
1 x	Extension Arm for Carburetor (red)
1 x	89 mm INO spinner (carbon imitation)
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	Sparkplug ROSSI R8
1 x	41x5,5 mm wires output (2 pcs)
1 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Carburator Moki S 180
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	LiPo Storage Box Type "BIG"
1 x	Extension 7.5 cm
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	29x12 prop Super Silence
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	3-blades 27x12 carbon prop Super Silence
1 x	Wing conexion 2 servos Futaba 50 cm

10,792.69EUR