1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x LOGO 600 SX (kit)
2 x Plancha aluminio 500x250x0.5 mm
1 x Film perforado 145 cm / 50 m
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
2 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m
1 x Hoja de sandwich de fibra de carbono 350x150x3 mm
1 x Motor Scorpion HKIII 4035-560 Kv
1 x Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola)
1 x VBar Control RX-Satellite
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x Logo 400 SE VBar
2 x EDGE 540-A 105" (2660 mm)
1 x Manga de fibra de vidrio Ø 20 mm x 5m
1 x Fibra de vidrio picada 0.2 mm (1 Kg)
1 x Plancha estireno 320x120x1.0 mm
1 x Fibra carbono tela 160g/m2 127 cm x 1 m
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x Adaptador de hélice 4 mm M6
1 x Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x Ametralladora MG 1,8 cm (5 pcs)
1 x Aero-Master Alas (Aero-naut)
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Rodillo teflon 40 mm x 15 mm Diam.
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x Plancha fibra vidrio 350x150x0.3 mm
1 x Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Fibra de vidrio 80 g/m² (cruzada) 100 cm x 50m
1 x Fibra de vidrio picada 3mm (200g)
1 x Plancha estireno 320x120x0.5 mm
1 x Fibra carbono tela 245g/m2 125 cm x 20 m
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Plancha termoformable 0,5 mm (0,02") DIN A4
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Cono aluminio autoventilado helice pleg. 30 mm dia./eje 3.17 mm
1 x Cono aluminio autoventilado hélice pleg. 50 mm dia./eje 6 mm
1 x Adaptador 3,0 mm M5 para cono 30 mm hélice fija.
1 x Aero-Master Fuselage (Aero-naut)
1 x Abrazadera 3.2x142 (20 uds)
1 x Adaptador de 2,3 mm para conos de 30 mm
1 x Acople ALU M2 Ø 3 (2 uds)
1 x Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x Accesorios SCHARNHORST
1 x Adaptador de hélice 10 mm M12
1 x Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x SLICK 360-A 104" (2640 mm)
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
9,782.38EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas