1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cylynder DLE 20-RA
1 x Aluminium servo arm (2 uds)
1 x Miss ULTIMATE 50E Red/Black
1 x Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x Piston ring for DLE-20 RA
1 x Gates hinge aluminium (1 pcs)
1 x Propeller POWER-PROP 13x9 Izda
1 x Propeller POWER-PROP 14x9 Izda
1 x DLE 85 Ignition unit
1 x Canister combo DLE 111 cc
1 x Gasket set DLE-20
1 x Motor DLE 65 cc
1 x 
2 x SkyMaxx 1.550 mm (kit)
1 x Escape Moki 100 BVT
1 x Carburettor Intake Bend for ZG38
1 x Canister combo DLE 55 cc
1 x Front axi for DA85/DA100/DA100L/DA120
1 x Captador RCEXL para DA
1 x Motor NGH GF 150 R5
2 x 180° TUBE-ANGLE Ø 25 mm
1 x Carburator Moki S250
1 x Baffles for Radial Moki S250/330 mm
1 x Muffler ZG 38/S/SC
1 x Ignition unit for DA-70/100/120/150/170/200
1 x Motor MOKI S 250 cc 7-cylindrer
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Carburator Moki S 180
1 x Air filter MOKI
1 x Reed valve cage with petals for DA 100/150
1 x Motor Moki S 300 cc 5 cylinders
1 x Stainless steel flange for VM 60/70/120/140
1 x Motor DA 120
2 x Giant Scale Muffler D.A. 150 (2 pcs)
1 x Silencer for ZG22, ZG23, ZG231SLH, G2D96-D
1 x Piston ring for DA-85 and DA-170
2 x Crankshaft DA-120
1 x Muffler ZG 20
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Piston pin for DA-60 DA-120
1 x Carburator gasket MOKI
1 x Stainless Steel Muffler D.A. 50/100/120
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x KS86 V muffler up to 65cc
1 x Shirt Hispano Aviación
2 x Sensor Ignition RCEXL Universal
1 x Flange gasket MOKI carburetor
1 x Carburetor for ZG45SL and ZG62/S/SL
2 x 90° TUBE-ANGLE Ø 25 mm
1 x Piston ring for DA-60 and DA-120
1 x Woodruff key for DA50/85/100/150 and DA 200
1 x L ELBOW DA-120 normal(2 pcs)
1 x Carb Carrier, red DA-85, DA-100L and DA-120
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
2 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x Cap Hispano Aviación
1 x ‎Reed valve for DA-60/70
1 x Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R
1 x Rear crankcase DA-50R
1 x Motor NGH GT-9 V2
1 x MVVS presuritation conection 26-175 cc
1 x Silencer with rear exhaust MTW TDH 110
1 x PRO-HV Dual Action Valve
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Hose connector stopper 4 mm
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x 40 mm air cylinder
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x 29,0 mm propeller (rigth propeller)
1 x Gasoline filter
1 x Antonov AN2 Scale 1/6 - 3m
2 x DA-100 Bearing
1 x Mini neumatic retract landing gear
1 x 3 blades set
1 x Motor Mega AC 16/25/01E 3.17mm
1 x Motor Mega AC 16/15/04 COMBAT
1 x MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x 12 mm mast holder
1 x 250 mm / 16 mm Airbrakes
1 x 29,0 mm propeller (left propeller)
1 x 25 mm fenders (10 pcs)
1 x Motor NGH GF30
1 x 5 mm gas motor standoff
1 x 90° TUBE-ANGLE Ø 28 mm
1 x 15 mm gas motor standoff
1 x Pipa 3D F-16 Scale 1/6
1 x Jeemo Dolly
1 x 50 mm gas motor standoff
1 x HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x Fixing Ring with Base 60 mm
1 x Gasket for motor DA 50-R
1 x Dia. 25x20 mm tefon tube for escape
1 x OPUS-V / Jet-CC-BF
2 x Dia. 20x10 mm teflon tube for escape
1 x Tubo Teflon Ø28 mm x 10cm
1 x Dia. 16x35 mm PTFE tube for escape
1 x Gasoline big filter
1 x Metalic joint for DA-85/DA170 cilinder/elbow
1 x Carburetor diaphragm set DA-150/170
1 x 45 mm gas motor standoff
2 x 30cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Escape Krumscheid 81-6 hasta 55 cc
1 x Crankcase gasket DA-100
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x Exhaust gasket DA-35 and DA-70
1 x Motor NGH GT-17
1 x Pendulun 27g to tank
1 x MTW TD120K MUFFLER
1 x Exhaust gasket DA-60/120
1 x Stainless Steel Bend D 22x0,5mm
1 x Piston for DA-50R, DA-100, DA-100L
1 x Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA
1 x 120x60 mm SLH KOVO wheel
1 x Cooler motor type 400
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x AXI 2204 Multicopter
1 x Blade Holder Full (4 blades)
1 x Mega Motor RC 400 F5J 1950KV
1 x Motor Mega AC 16/07/04
1 x Motor Mega AC 16/30/01
1 x Motor Mega AC 16/07/12
1 x Motor Mega AC 16/25/02
1 x Motor Mega AC 16/07/08
1 x Motor Mega AC 16/25/04
1 x Motor Mega AC 22/45/03 E
1 x Motor Mega AC 22/30/03
1 x Motor Mega AC 16/25/06
1 x Motor Mega AC 16/10/03 RACE
1 x Tail tube RAINBOW
1 x 4 blades set
1 x Motor Mega AC 22/45/02 E
1 x Motor Mega AC 16/15/08
1 x Motor Mega AC 16/20/02
1 x 10 mm gas motor standoff
1 x Collector screw DA
1 x Gasket for motor DA 50
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
2 x Propeller hub spacer 8/5.5
30,253.91EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies