Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

enought units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 enought units	Propeller MENZ-S 18x12 enought units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) enought units
MPS Gas-Cap-Powerswitch enought units	Straightened rod Ø 1.0 mm x 1000 mm enought units	Tacometer mini ignition RCEXL enought units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bateria LiPo GRE24 600 mAh 3.7v
12.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	5 mm Prop Adapter M6
1 x	Universal Colour Paste deep black 250 g
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nitroverdu 500 ml
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	BEC 3A FOXY
1 x	3 LiPo XH>EH adapter
1 x	M3 black washers (4 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	DUPLEX 2,4GHz MRPM EX
1 x	Receiver R7008HV comatible FUTABA
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	DUPLEX MUI 50 Sensor
1 x	Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
1 x	Receptor CORE PBR-26XS 26ch
1 x	4 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M6
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Receiver CORE PBR-26D 26ch
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Adapter lead MPX/XT60
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	MPX Sub-D Adaptor
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Gates hinge aluminium (1 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	Remote electric ignition system
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Red smoke canister 65 g
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	MT 125 temperature sensor
1 x	Green smoke canister 65 g
1 x	Tirpiz Battleship 1:200
1 x	3,2 mm Prop Adapter M6
1 x	6 mm Prop Adapter M8
1 x	JETImodel Addcap 820
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	3.2 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	Aero-Master Wings (Aero-naut)
1 x	SCHARNHORST Battleship 1:200
1 x	5 mm Prop Adapter M8
1 x	Glases Innovation Plus
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Indoor hinge with servo arm integraded
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Bungee HLG Premium
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	500 ml sealer (DOPE)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	1/4 Pilot "Mike"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Connectors DEANS 4 pins (1 pair)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	1/10 Pilot "Jimmy"
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	1/6 Pilot "Buddy"
1 x	Circlick securite
1 x	ABS tube 14.0x10.0x1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Piloto JET 1:3,5
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Cabling for Fox MDM1 wings
1 x	Connectors DEANS (T)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x
1 x	Ferrita 17x10x6.5 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Long pinned hinge (12 uds)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector

2,743.81EUR