1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x 2 mm female connector (2 pcs) with safety connector
1 x Conector JR Servo male (10 pcs)
1 x Conector Servo female 4 pines
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors DEANS (T)
2 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
2 x Banna gold connector 2,5 mm (100 M/F pairs)
2 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x 30 cm MULTIPLEX female connector
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors DEANS (T) micro
1 x Conector JR Servo female (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
2 x Banna gold connector 2,5 mm (M/F)
1 x 30 cm DEANS female connector
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector BEC female (10 pcs)
3 x Glases Stratus
2 x Glases Moritz
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x Glases Ace
3 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Xplorer2 anemometro
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x BALSA triangular 15x15x1000 mm
1 x Connectors banna oro 2 mm (M/F)
1 x Z Bender - S Type Tool
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x Bag connector 2 mm
2 x Glases Flitemaster
1 x Foam plastic plates (310x210x3 mm)
2 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Charger LiPo Charger4
1 x Glases Nimbus "Black"
1 x Foam plastic plates (310x210x8 mm)
3 x Glases Aspen
1 x Decorative caps, multicoloured
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x XH male balance (4S) connector (2 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector JAPAN G2 Set 5 pares
1 x Conector MT-60 (pair)
1 x Conector MR-60 (pareja)
1 x Conector JR Servo female (10 pcs)
1 x Coupling bush 5 - 5 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
2 x Glases Nimbus
2 x Glases Innovation Plus
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Spinner NUT M5
1 x Fibreglass-Spinner BS ∅155 x 200 mm
2 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x XH female balance (9S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Servo Connector Brackets (10 pcs)
2 x Carbon plate 350x150x3.0 mm
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x ESC ALPHA 60A HV
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Gearwheel 9724/09 for ZG 45
2 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Angled clevis with threaded rod M3
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Crystal Universal RX 35.170 Ch 77
1 x Crystal RX 35.120 Ch 72
1 x EDGE XL Orange
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Mudguard for 140/165 mm wheels
1 x Wheel FEMA 178 mm / 8 mm
1 x 300 Newtons FEMA absorber
1 x Restrictor FESTO 3/3 mm
1 x Mudguard wheels 112/127 mm
1 x 100 Newtons FEMA absorber
1 x Servo arm with 5 mm hole to FEMA 9810A
1 x Wheel FEMA 140 mm / 6 mm
1 x 200 Newtons FEMA absorber
1 x L-shaped servo mount
1 x Compact on-board starting system (9724)
1 x 400 Newtons FEMA absorber
1 x Landing gear axle Ø 6 mm (2 uds)
1 x Compact on-board starting system (9525)
1 x Support ECU Xicoy X-45
1 x Actuador lineal HLS12-100210-7.4v
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Propeller POWER-PROP 14x9
1 x Crystal Universal RX 35.030 Ch 63
1 x Crystal TX 35.050 Ch 65
1 x Crystal TX 35.100 Ch 70
1 x Frontal Adapter for AXI53xx
2 x 8 mm Adapter for AXI53xx
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
4,955.75EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies